restrained intheevent of an accident,forexample.
#Ifthechild andthechildrestraint sys‐temtogetherweigh morethan73lb(33kg), useonly aLATCH-type (ISOFIX)childrestraint systemthat securesthechild withthevehicle seat belt.
#Also securethechildrestraint systemwiththeTopTether belt, ifavailable.
Always comply withthe information aboutthemass ofthechildrestraint system:
Rinthe manufacturer's installation and operat‐ing instructionsforthechildrestraint systemused
Ron a label onthechildrestraint system, ifpresent
Regularlycheckthatthe permissible gross massofthechild andchildrestraint system isstillcomplied with.
Whenyou are installing achildrestraint system,observethefollowing:
sAlways observethe correct use andthe suit‐ability ofthe seatsfor attaching achildrestraint system.
sAlways comply withthe manufacturer'sinstallation and operating instructionsforthechildrestraint system used.
sMake surethatthechild'sfeetdo nottouchthe front seat. If necessary,movethe frontseatforward slightly.
Whenyou are installing aLATCH-type(ISOFIX)childrestraint system, observethefol‐lowing:
sWhenyou are using a Group 0/0+ babycar seat and a Group 1rearward-facingchildrestraint system on arear seat:adjustthe front seat sothatthe seat doesnottouchthechildrestraint system.
sWhenyou are using a Group 1forward-facingchildrestraint system:removetheheadrestraint fromtherespective seat, if
possible. In addition,the seat backrest ofthechildrestraint system must, asfar aspossible, lieflat againstthe backrest ofthevehicle seat.
Afterthechildrestraint system has beenremoved,replacethe headrestraints againimmediately and adjustthem correctly.
sFor certainchildrestraint systems inweightgroup 2 or 3,there may berestrictions inthe maximum size setting, e.g. duetopossi‐ble contact with theroof.
sThechildrestraint system must not beten‐sioned betweentheroof andthe seat cush‐ion and/or be installedfacingthe wrongdirection. Where possible, adjustthe seatcushion inclination accordingly.
sThechildrestraint system must not be putunderstrainbythe headrestraints.Adjustthe headrestraints accordingly.
54Occupant safety
Beforeevery trip, make surethattheLATCH-type(ISOFIX)childrestraint system is engaged cor‐rectly in bothmounting brackets inthevehicle.
*NOTEBe careful nottodamagethe seatbeltforthe center seat when installingthechildrestraint system
#Make surethatthe seat belt is not trap‐ped.
#Vehicles withrecliningrear seats:Movetherecliningrear seat backrest down slightlybeforetheLATCH-type (ISOFIX)childrestraint system is installed.
#Removethe upholstered lining1.
#Vehicles withoutrecliningrear seats:Foldupholstered lining1upwards.
#Turnthe support ontherear side of uphol‐stered lining1by90°.The upholstered lining1willremainfoldedupwards.
#AttachtheLATCH-type (ISOFIX)childrestraint systemtobothmounting brackets2inthevehicle.
#Vehicles withrecliningrear seats:Returntherecliningrear seat backresttoan uprightposition.Therecliningrear seat backrest mustrestagainstthechildrestraint system.
SecuringTopTether
&WARNINGRisk of injuryor death whenadjustingthe seat after installing achildrestraint system
Vehicles with electrically adjustablerearseats:
Ifyou adjustthe seat after installing achildrestraint system,thefollowing may occur:
Rthe seat belt may either sittoo loose ortoo tight
Rthechildrestraint system can becomeloose, incorrectly positioned or damaged
As aresult,thechildrestraint system maynot be abletoprovidethe intended level ofprotection.
#Never adjustthe seat after installingthechildrestraint system.
Ifthechildrestraint system is equippedwith aTopTether belt:
Therisk of injury can bereducedbyTo pTether. TheTopTether beltfacilitates an
Occupant safety55
additional connection betweenthechildrestraint system attached withLATCH-type (ISOFIX) andthevehicle.
#If necessary,moveheadrestraint1upwards (→page107).
#Fold up cover2ofTopTether anchorage3.
#InstalltheLATCH-type (ISOFIX)childrestraintsystem withTopTether. Always comply withthechildrestraint system manufacturer'sinstallation instructions when doing so.
#GuideTopTether belt4under headrestraint1betweenthe two headrestraintbars.
#HookTopTether hook5ofTopTether belt4without twisting intoTopTether anchor‐age3.
#TensionTopTether belt4. Always complywiththechildrestraint system manufactur‐er's installation instructions when doing so.
#Fold down cover2ofTopTether anchorage3.
#If necessary,slide headrestraint1down‐wards (→page107). Make surethatyou donot interferewiththe correctrouting ofTo pTether belt4.
Securingthechildrestraint system withtheseat belt
Securingthechildrestraint system withtheseat belt ontherear seat
When installing a belt-securedchildrestraintsystem, observethefollowing:
sAlways comply withthe manufacturer'sinstallation and operating instructionsforthechildrestraint system used.
sWhen using a category 0/0+ baby carseat and a category Irearward-facingchildrestraint system on arear seat:adjustthe front seat sothatthe seat doesnottouchthechildrestraint system.
sWhen using a category Iforward-facingchildrestraint system:removethe head
56Occupant safety