Page 416 of 518
R
at a qualified specialist workshop Coolant
Note
s on coolant
Obser vethe no tes on operating fluids
(→ page 410). &
WARNING ‑ Risk of fire and injury from
antifreeze
If antifreeze comes into con tact wi thhot
component parts in the engine compart‐
ment, it may ignite. #
Allow the engine tocool down before
adding antifreeze. #
Makesure that no antifreeze spills out
next tothefiller opening. #
Thoroughly clean off any antifreeze
from component parts before starting
th eve hicle. *
NO
TEDama gecaused byincor rect cool‐
ant #
Only add coolant that has been pre‐
mixed with therequ ired antifreeze pro‐
te ction.
Information on coolant is available at thefo l‐
lowing locations:
R Inthe Mercedes-Benz Specification for
Operating Fluids 310.1
- Athttp://be vo.mercedes-benz.com
- Inthe Mercedes-Benz BeVo app
R Ataqu alified specialist workshop *
NO
TEOverheating at high outside tem‐
peratures If an inapp
ropriate coolant is used, the
engine cooling sy stem is not suf ficiently pro‐
te cted against overheating and cor rosion at
high outside temp eratures. #
Alw ays use coolant appr ovedby
Mercedes-Benz. #
Obser vethe instructions in the
Mercedes-Benz Specifications for Oper‐
ating Fluids 310.1. Ha
ve the coolant regularly replaced at a qualified
specialist workshop.
The proportion of cor rosion inhibitor/antifreeze
concentrate in the engine cooling sy stem should
be:
R a minimum of 50% (antifreeze pr otection
down toappr oximately -35 °F (-37 °C))
R a maximum of 55% (antifreeze pr otection
down to-49 °F (-45 °C))
Coolant capacity Mode
lC apacity
S 560 15.0 US qt (14.2 l) Note
s on windshield washer fluid Obser
vethe no tes on operating fluids
(→ page 410). 414
Tech nical da ta
Page 417 of 518
&
WARNING ‑ Risk of fire and injury from
windshield washer concentrate
Wi ndshield washer concentrate is highly
fl ammable. It could ignite if it comes into
con tact wi thhot engine component parts or
th eex haust sy stem. #
Make sure that no windshield washer
concentrate spills out next tothefiller
opening. *
NO
TEBlocked spr aynozzles caused by
mixing windshield washer fluids #
Do not mix MB SummerFit and MB Win‐
te rFit with other windshield washer flu‐
ids. Do not use distilled or de-ionized
water asthefill
le ve l sensor may be triggered er roneously.
Re commended windshield washer fluid:
R Abo vefreezing point: e.g. MB SummerFit
R Below freezing point: e.g. MB WinterFit Fo
rth e cor rect mixing ratio, referto the informa‐
tion on the antif reeze conta iner.
Mix thewa sher fluid with the windshield washer
fl uid all year round. Re
frigerant Note
s onrefrigerants
Obser vethe no tes on operating fluids
(→ page 410).
* NO
TEDama gedue toincor rect refriger‐
ant If a non-appr
ovedre frigerant is used, the cli‐
mate control sy stem may be damaged. #
Only use there frigerant R‑134a *
NO
TEDama getothe climate control
sy stem due toincor rect refrigerant com‐
pressor oil #
Only use refrigerant compressor oil that
has been appr ovedby Mercedes-Benz. #
Do not mix the appr ovedre frigerant
compressor oil with a dif fere nt refriger‐
ant compressor oil. Wo
rkon the climate control sy stem may be car‐
ri ed out only byaqu alified specialist workshop.
All applicable regulations, as well as SAEstand‐
ard J639, must be adhered to. 1
Warning symbols
2 Refrigerant filling capacity
3 Applicable standards
4 PAG oil part number
5 Refrigerant type Te
ch nical da ta415
Page 427 of 518
Display messages
Possible causes/consequences and 0050
0050Solutions
R Exte nded country driving wi thout other traf fic, e.g. in the desert
Driving sy stems and driving saf ety sy stems may be malfunctioning or temp orarily una vailable.
Once the cause of the problem is no longer present, driving sy stems and driving saf ety sy stems will be available
again.
If th e display message does not disappear: #
Pull over and stop theve hicle safely as soon as possible, paying attention toroad and traf fic conditions. #
Clean all senso rs (→page 352). #
Restart the engine.
0025
00E5
Currently Unavailable See
Operator's Manual *
ABS and ESP ®
are temp orarily una vailable.
Other driving sy stems and driving saf ety sy stems may also be temp orarily una vailable.
The brake sy stem continues tooperate normally. The braking dis tance in an emergency braking situation can
increase. &
WARNING Risk of skidding if ABS and ESP ®
are malfunctioning
If ABS and ESP ®
are malfunctioning, the wheels could lock when braking and ESP ®
cann otcar ryout vehicle
st abilization.
The steering capability and braking characteristics are thus se verely impaired. The br aking distance in an emer‐
ge ncy braking situation can increase. In addition, other driving saf ety sy stems are switched off. #
Drive on carefull y. Displ
aymessa ges and warning/indicator lamps 425
Page 433 of 518
Display messages
Possible causes/consequences and 0050
0050Solutions
Active Brake Assist Func-
tions Limited See Opera-
tor's Manual *
Ve hicles with Driving Assistance Package: Active Brake Assi stwith cross-traf fic function, Evasi veSteering
Assist or PRE‑SAFE ®
PLUS is malfunctioning.
Ve hicles without Driving Assistance Package: Active Brake Assi stis malfunctioning. #
Visit a qualified specialist workshop.
Active Brake Assist Func-
tions Currently Limited See
Operator's Manual *
Ve hicles with the Driving Assistance Package: Active Brake Assi stwith cross-traf fic function, Evasi veSteering
Assist or PRE‑SAFE ®
PLUS are temp orarily una vailable or only partially available.
Ve hicles without the Driving Assistance pa ckage: Active Brake Assi stistemp orarily una vailable.
The ambient conditions are outside the sy stem limits . #
Drive on.
As soon as the ambient conditions are within the sy stem limits, the sy stem will become available again. #
Ifth e display message does not disappear, stop theve hicle while paying attention toroad and traf fic conditions
and restart the engine.
PRE-SAFE Inoperative See
Operator's Manual *
PRE‑SAFE ®
functions are malfunctioning. #
Visit a qualified specialist workshop.
Mercedes me connect
Services Limited See Oper-
ator's Manual *S
ervice limited.
At least one of the main functions of the Mercedes me connect sy stem is malfunctioning. #
Obser vethe no tes on the diagnostics connection (→ page 23). #
Visit a qualified specialist workshop. Display messages and
warning/indicator lamps 431
Page 435 of 518
Display messages
Possible causes/consequences and 0050
0050Solutions
Drive More Slowly *Y
ou are driving toofast forth e selected vehicle le vel. #
In order toadjust theve hicle le vel,yo u must not drive at speeds greater than 50 mph (80 km/h). #
In order toadjust theve hicle le vel during trailer operation, you must not drive at speeds greater than 19 mph
(30 km/h).
Blind Spot Assist Currently
Unavailable See Operator's
Manual *B
lind Spot Assist is temp orarily una vailable.
The sy stem limits ha vebeen reached (→ page 202). #
Drive on.
Once the cause of the problem is no longer present, the sy stem will be available again.
or #
Ifth e display message does not disappear, stop theve hicle while paying attention toroad and traf fic conditions
and restart the engine. #
If necessar y,clean there ar bumper. If the bumper is extreme lydirty, the sensors in the bumper may be mal‐
functioning. Active Steering Assist Inop-
erative *A
ctive Steering Assist is malfunctioning. Active Dis tance Assi stDISTRONIC remains available. #
Visit a qualified specialist workshop. Display messages and
warning/indicator lamps 433
Page 436 of 518
Display messages
Possible causes/consequences and 0050
0050Solutions
00CC Vehicle Rising Please Wait *T
hevehicle le vel is too lo w.The vehicle is raised tothe selected vehicle le vel. #
Wait until the display message disappears before pulling away.
Blind Spot Assist Inopera-
tive *B
lind Spot Assist is malfunctioning. #
Visit a qualified specialist workshop.
Active Parking Assist and
PARKTRONIC Inoperative
See Operator's Manual *A
ctive Parking Assist and Parking Assist PARKTRONIC are malfunctioning. #
Stop theve hicle, paying attention toroad and traf fic conditions, and restart the engine. #
Ifth e display message continues tobe displa yed, consult a qualified specialist workshop.
Active Blind Spot Assist
Currently Unavailable See
Operator's Manual *A
ctive Blind Spot Assi stistemp orarily una vailable.
The sy stem limits ha vebeen reached (→ page 202). #
Drive on.
Once the cause of the problem is no longer present, the sy stem will be available again. #
Ifth e display message does not disappear, stop theve hicle while paying attention toroad and traf fic conditions
and restart the engine. *A
ctive Steering Assist is temp orarily una vailable.
The ambient conditions are outside the sy stem limits (→ page172). #
Drive on.
As soon as the ambient conditions are within the sy stem limits, the sy stem will become available again. 434
Display messages and warning/indicator lamps
Page 443 of 518
Display messages
Possible causes/consequences and 0050
0050Solutions
Cruise Control Inoperative *C
ruise control is malfunctioning. #
Visit a qualified specialist workshop.
Active Lane Keeping Assist
Camera View Restricted
See Operator's Manual *
Ve hicles without Active Steering Assis t:the camera view is restricted.
Po ssible causes are:
R dirt on the windshield in the camera's field of vision
R heavy rain, snow or fog
Driving sy stems and driving saf ety sy stems may be malfunctioning or temp orarily una vailable.
Once the cause of the problem is no longer present, driving sy stems and driving saf ety sy stems will be available
again.
If th e display message does not disappear: #
Pull over and stop theve hicle safely as soon as possible, paying attention toroad and traf fic conditions. #
Clean the windshield. Engine
Display messages
Possible causes/consequences and 0050 0050Solutions
003D *T
he battery is not being charge d. Display messages and
warning/indicator lamps 441
Page 444 of 518
Display messages
Possible causes/consequences and 0050
0050Solutions
See Operator's Manual *NO
TEPossible engine damage if you continue driving #
Do not continue driving under any circum stances. #
Consult a qualified specialist workshop. #
Pull over and stop theve hicle safely and switch off the engine, paying attention toroad and traf fic conditions. #
Consult a qualified specialist workshop.
003D Stop Vehicle Leave Engine
Running *T
he battery charge leve l is too lo w. #
Pull over and stop theve hicle safely as soon as possible, paying attention toroad and traf fic conditions. Do not
continue driving under any circums tances. #
Lea vethe engine running. #
Wait until the display message disappears before pulling away.
Check Coolant Level See
Operator's Manual *T
he coolant le vel is too lo w.
* NO
TEEngine dama gedue toinsuf ficient coolant #
Avoid long journe yswith insuf ficient coolant. #
Add coolant (→ page 341).
00B6 *T
here has been pressure loss in the fuel sy stem. The fuel filler cap is not closed cor rectly or the fuel sy stem is
leaking. #
Close the fuel filler cap. 442
Displaymessa ges and warning/indicator lamps