Pushthe plug of hose5intoflange6oftire sealant bottle1untilthe plug engages.
Place tire sealant bottle1head downwardsintorecess2ofthe tire inflation compres‐sor.
Removethevalve cap fromvalve7onthedefective tire.
Screwfilling hose8ontovalve7.
Insert plug4into a12V socket inyourvehicle.
Switchthe ignition on.
Press on and off switch3onthe tire infla‐tion compressor.The tire inflation compressor is switched on.The tire is inflated. First, tire sealant is pum‐ped intothe tire. The pressure may brieflyrisetoapproximately 500 kPa (5 bar/73 psi).
Do not switch offthe tire inflation compres‐sor duringthis phase.
Letthe tire inflation compressorrunfor amaximum often minutes.The tire shouldthen haveattained a tirepressure of at least 200 kPa (2.0 bar/29 psi).
If tire sealant leaks out, make sureyou cleantheaffected area asquickly as possible. It is prefera‐bletouse clearwater.
Ifyouget tire sealant onyour clothing, haveitcleaned as soon as possible with perchloroethy‐lene.
If, afterten minutes, a tire pressure of200 kPa (2.0 bar/29 psi) has not been ach‐ieved:
Switch offthe tire inflation compressor.
Unscrewthefilling hose fromthevalve ofthedefective tire.
Please notethat tire sealant may leak out whenunscrewingthefilling hose.
Driveforwards orreverseveryslowlyforapproximately 33ft(10 m).
Pump upthe tire again.After a maximum often minutesthe tirepressure must be at least 200 kPa (2.0 bar/29 psi).
\nWARNINGRisk of accident duetothespecified tire pressure not beingreached
Ifthe specified tire pressure is notreachedafterthe specified time,the tire istoo badlydamaged. The tire sealant cannotrepairthetire inthis instance.
368Breakdown assistance
