2019 MERCEDES-BENZ E CLASS maintenance

Parkthevehicle on a level surface.
Checkthe coolanttemperature display intheinstrument cluster.The coolanttemperature must be below158 °F (70 °C).
Slowly turn cap1counter-clockwisetorelieve overpressure.
Continue turning cap1counter-clockwiseandremoveit.
The coolant level is correct:
RIfthe engine is cold, uptomarker bar2.
RIfthe engine iswarm, upto0.6 in (1.5 cm)over marker bar2.
If necessary,add coolantthat has beenapprovedbyMercedes-Benz.RFurther information on coolant:(→page 423)
Addingwasherfluidtothe windshieldwasher system
\nWARNINGRisk of burns from hot com‐ponent parts inthe engine compartment
Certain component parts inthe engine com‐partment can beveryhot, e.g.the engine,the cooler and parts oftheexhaust system.
Letthe engine cool down and onlytouchthe component parts describedasfollows.
\nWARNINGDanger of burns when open‐ingthe hood
Ifyou openthe hood whenthe engine hasoverheated or during afireinthe enginecompartment,you could come into contactwith hotgases orother escaping operatingfluids.
Before openingthe hood, allowtheenginetocool down.
Intheevent of afireinthe engine com‐partment,keepthe hood closed andcallthefireservice.
\nWARNING‑ Risk offireand injury fromwindshieldwasher concentrate
Windshieldwasher concentrate is highlyflammable. It could ignite if it comes intocontact withhot engine component parts ortheexhaust system.
Make surethat no windshieldwasherconcentrate spills out nexttothefilleropening.
354Maintenance and care

Removecap1bythetab.
Addwasherfluid.
Keepingthe air-water duct free
Keepthe area betweenthe hood andthewindshield free of deposits, e.g. ice, snowand leaves.
Cleaning and care
Notes onwashingthevehicle in a carwash
\nWARNINGRisk of accident duetoreduced braking effect afterwashingthevehicle
The braking effect isreduced afterwashingthevehicle.
Afterthevehicle has beenwashed,brake carefully while paying attentiontothe traffic conditions untilthe brakingeffect has been fullyrestored.
NOTEDamageduetounsuitable carwash
Before driving into a carwash makesurethatthe carwash is suitableforthevehicle dimensions.
Ensurethere is sufficient ground clear‐ance betweenthe underbody andtheguiderails ofthe carwash.
Ensurethatthe clearance width ofthecarwash, in particularthe width oftheguiderails, is sufficient.
Toavoid damageto yourvehicle when using acarwash, ensurethefollowing beforehand:
RActive Distance AssistDISTRONIC andtheHOLD function are deactivated.
Rthe 360° Camera ortherear view camera isswitched off.
Rthe side windowsand sliding sunroof arecompletelyclosed.
Rthe blowerfortheventilation/heating isswitched off.
Rthe windshield wiper switch is in positionZ.
Rin carwashes with a conveyor system: neu‐tral\\is engaged.
Rthe SmartKeyis at a distance of at least10ft(3 m)awayfromthevehicle,otherwisethetrunk lid could open unintentionally.
Maintenance and care355

Ifyouwould liketoleavethevehicle while itis beingwashed, make surethe SmartKeyislocated inthevehicle. The]gear isother‐wise automatically engaged.
If, afterthe carwash,youremovethewaxfromthe windshield and wiperrubbers,thiswill prevent smearing andreduce wipernoise.
Information on using a powerwasher
\nWARNINGRisk of accident when usinghigh-pressure cleaning equipment withround-spraynozzles
Thewater jet from around-spraynozzle (dirtgrinder) may cause damagetotires and sus‐pension componentsthat is not visible.
Components damaged inthisway mayfailunexpectedly.
Do not use high-pressure cleaningequipment withround-spraynozzlestocleanyourvehicle.
Damaged tires or suspension compo‐nents must bereplaced immediately.
Toavoid damageto yourvehicle, observethefol‐lowing when using a powerwasher:
Rkeepthe SmartKeyat least10ft(3 m)awayfromthevehicle. Otherwisethe trunk lidcould open unintentionally.
Rmaintain a distance of at least11.8 in(30 cm)tothevehicle.
Rvehicles with decorativefoil:parts ofyourvehicle are covered with a decorativefoil.Maintain a distance of at least27.6 in(70 cm) betweenthefoil-covered parts ofthevehicle andthe nozzle ofthe powerwasher.Movethe powerwasher nozzle around whilstcleaning. Thewatertemperature ofthepowerwasher must notexceed140 °F(60 °C).
Robservethe information onthe correct dis‐tance inthe equipment manufacturer's oper‐ating instructions.
Rdo not pointthe nozzle ofthe powerwasherdirectly at sensitive parts such as tires, slits,electrical components, batteries, light bulbsandventilation slots.
Washingthevehiclebyhand
Observethe legalrequirements, e.g. in a numberof countries,washingbyhand is only permittedin specially designatedwash bays.
Use a mild cleaning agent, e.g. car shampoo.
Washthevehicle with lukewarmwater usinga soft car sponge. When doing so, do notexposethevehicletodirect sunlight.
Carefully hosethevehicle off withwater anddry using achamois.Takecare nottopointthewater jet directlytowardsthe air inletgrille.
356Maintenance and care

Notes on paintwork/mattefinish paintworkcare
Observethefollowing information:
Cleaning and careAvoiding paintwork damage
PaintworkRInsectremains: soak with insectremover andrinse offthetreated areas afterwards.
RBird droppings: soak withwater andrinse off afterwards.
RTreeresin, oils, fuels and greases:removebyrubbinggen‐tly witha clothsoaked in petroleumether or lighterfluid.
RCoolant and brakefluid:removewith a damp clothandcleanwater.
RTarstains: usetarremover.
RWax: use siliconeremover.
RDo not attachstickers,films or similar.
RRemovedirt immediately,where possible.
Maintenance and care357

Cleaning and careAvoiding paintwork damage
MattefinishROnly use care products approvedfor Mercedes-Benz.RDo not polishthevehicle and alloy wheels.
ROnly use carwashesthat correspondtothe latest engi‐neeringstandards.
RDo not use carwash programs with afinal hotwax treat‐ment.
RDo not use paint cleaners, buffing or polishing products,gloss preservers, e.g.wax.
RAlways havepaintworkrepairs carried out at aqualifiedspecialistworkshop.
Notes on cleaning decorativefoils
Observethe notes on mattefinish care inthechapter "Notes on paintwork/mattefinish paint‐
workcare" (→page357). They also applytomatte decorativefoils.
358Maintenance and care

Observethefollowing information:
CleaningAvoiding damagetothe decorativefoil
RFor cleaning, use plenty ofwater and a mild cleaning agent withoutadditives or abrasivesubstances, e.g. a car shampoo approvedforMercedes-Benz.
RRemovedirt immediately, where possible, whilstavoidingrubbingtoo hard. There isotherwise arisk of damagingthe decorativefoilirreparably.
RIfthere is dirt onthefinish or ifthe decorativefoil is dull: usethePaint Cleanerrecommended and approvedfor Mercedes-Benz.
RInsectremains: soak with insectremover andrinse offthe treatedareas afterwards.
RBird droppings: soak withwater andrinse off afterwards.
RTopreventwaterstains, dry afoil-wrappedvehicle with a soft,absorbent clothaftereverycarwash.
RThe service life and color of decorativefoils are impairedby:
-sunlight
-temperature, e.g. hot air blower
-weather conditions
-stonechippings and dirt
-chemical cleaning agents
-oily products
RDo not use polish on matte decorativefoil.Polishing will havethe effectof shiningthefoil-wrapped surface.
RDo not treat matte orstructured decorativefoils withwax.Permanentstains may occur.
Scratches, corrosive deposits, areas affectedbycorrosion and damage causedbyincorrect carecannot alwaysbe completelyrepaired. In suchcases, visit aqualified specialistworkshop.
You can obtain more information on care andcleaning products fromthe manufacturer.
Inthe case offoil-wrapped surfaces, optical dif‐ferences may occur betweenthe surfacesthatwerenot protectedbya decorativefoil afterremoving a decorativefoil.
Haveworkorrepairstodecorativefoils car‐ried out at aqualified specialistworkshop,e.g. in an authorized Mercedes-Benz Center.
Maintenance and care359

Notes on care ofvehicle parts
\nWARNINGRisk of entrapment ifthewindshield wipers are switched on whilethe windshield is being cleaned
Ifthe windshield wipers are set in motionwhileyou are cleaningthe windshield orwiper blades,you can be trappedbythewiper arm.
Always switch offthe windshield wipersandthe ignition before cleaningthewindshield or wiper blades.
\nWARNINGRisk of burning fromthetail‐pipe ortailpipe trim
Thetailpipe andtailpipe trim can becomeveryhot. Ifyou come into contact withthesecar parts,you could burnyourself.
Always be particularlycareful when inthe vicinity ofthetailpipe andtailpipetrims and supervisechildrenveryclosely when inthis area.
Before any contact, allowthe car partstocool down.
Observethefollowing information:
Notes on cleaning and careAvoidingvehicle damage
Wheels/rimsUsewater and acid-free wheel cleaners.RDo not use acidic wheel cleanerstoremovebrake dust.This could damage wheel bolts and brake components.
RToavoid corrosion ofthe brake discs and brakepads, drivethevehiclefor afew minutes after cleaning before parkingit. The brake discs and brakepadswarmup and dry out.
WindowsCleanthe windowsonthe inside and outside using a dampclothand cleaning agentsrecommendedbyMercedes-Benz.Do not use dry cloths or abrasive or solvent-based cleaningagentstocleanthe inside of windows.
Wiper bladesFold outthe wiper blades and cleanthem using a damp cloth.Do not cleanthe wiper bladestoo often.
360Maintenance and care

Notes on cleaning and careAvoidingvehicle damage
Exterior lightingCleanthe lenses with awet sponge and mild cleaning agent,e.g. car shampoo.Only use cleaning agents or cleaning clothsthat are suitablefor plastic lenses.
SensorsCleanthe sensors inthe front andrear bumper and intheradiator grill with a soft clothand car shampoo.When using a powerwasher, maintain a minimum distance of11.8 in (30 cm).
Rear view cameraand360° CameraROpenthe camera cover withthe multimedia system(→page 202) .
RUse cleanwater and a soft clothtocleanthe camera lens.
Do not use a powerwasher.
TailpipesClean with cleaning agentsrecommendedbyMercedes-Benz,particularlyinthe winter and afterwashingthevehicle.Do not use acidic cleaning agents.
Notes on care ofthe interior
\nWARNINGRisk of injuryfrom plasticparts breaking off afterthe use of sol‐vent-based care products
Careand cleaning products containing sol‐vents can cause surfaces inthe cockpittobecome porous.
Whenthe airbags are deployed, plastic partsmay breakaway.
Do not use any care or cleaning prod‐ucts containing solventstocleanthecockpit.
\nWARNINGRisk of injuryor death frombleached seat belts
Bleaching or dyeing seat belts can severelyweakenthem.
This can,forexample, cause seat beltstotear orfail in an accident.
Never bleachor dye seat belts.
Maintenance and care361