2019 MERCEDES-BENZ E CLASS ESP

Securingthechildrestraint system withtheseat belt onthe front passenger seat
When installing a belt-securedchildrestraintsystem onthe front passenger seat, alwaysobservethefollowing:
sObservethechildrestraint system manufac‐turer's installation and operating instruc‐tions.
sWhen using aforward-facingchildrestraintsystem in Group I:removethe headrestraint fromtherespective seat, if possi‐ble.
Whenyouremovethechildrestraint sys‐tem, installthe headrestraint again immedi‐ately and adjust allthe headrestraints cor‐rectly.
sThe backrestoftheforward-facingchildrestraint system must lie asflat as possibleagainstthe backrest ofthe front passengerseat.
sFor certainchildrestraint systems inweightgroup II or III,there may berestrictions inthe maximum size setting, e.g. duetopossi‐ble contact with theroof.
sThechildrestraint system must not be putunderstrain betweentheroof andthe seatcushion and/or be installedfacingthewrong direction.Adjustthe seat backrestinclination accordingly.
sThechildrestraint system must not be putunderstrainbythe headrestraints.Adjustthe headrestraints accordingly.
sNever place objects under or behindthechildrestraint system, e.g. cushions.
The seat belt onthe front passenger side isequipped with a special seatbeltretractor.
When activated,the special seatbeltretractorensuresthatthe seat belt does not slacken oncethechildrestraint system is secured(→page 53).
Setthe front passenger seat asfar back aspossible and movethe seat intothe highestposition.
Fullyretractthe seat cushion length adjust‐ment.
Adjustthe seat cushion inclination sothatthe front edge ofthe seat cushion is inthe
highest position andtherear edge oftheseat cushion is inthe lowestposition.
Setthe seat backresttoan almostverticalposition.
Installthechildrestraint system.The entire base ofthechildrestraint systemmust alwaysrestonthe seat cushion ofthefront passenger seat.
Always make surethatthe shoulder beltstrap is correctlyrouted fromthe seat beltoutlet ofthevehicletothe shoulder beltguide onthechildrestraint system.The shoulder beltstrap must beroutedfor‐wards and downwards fromthe seat belt out‐let.
If necessary,adjustthe seat belt outlet andthe front passenger seat accordingly.
Occupant safety59

Toactivate/deactivate:press button2.
Opening/closingthe side window intherearpassenger compartment is possible:
Rwith indicator lamp1lit: viathe switchonthe driver's door
Rwith indicator lamp1off: viathe switchonthe correspondingrear door or driv‐er's door
Notes on pets inthevehicle
\nWARNINGRisk of accident and injuryduetoanimals left unsecured or unat‐tended inthevehicle
Ifyou leaveanimals inthevehicle unatten‐ded or unsecured,theycould possiblypressdown buttons or switches.
Thereby an animal may:
Ractivatevehicle equipment and becometrapped,forexample
Rswitchsystems on or off and endangerotherroad users
Unsecured animals may bethrown around inthevehicle intheevent of an accident orsuddensteering and braking maneuver andinjurevehicle occupants inthe process.
Never leaveanimals inthevehicle unat‐tended.
Always correctly secureanimals whiledriving,forexample using a suitableanimal carrier.
Occupant safety61

Ifthevehicle is not opened within approximately40 seconds after unlocking, it locksagain. Anti-theft protection is activated again.
Do notkeepthe SmartKeytogether with elec‐tronic devices or metal objects. This can affectthe SmartKey's functionality.
If batterycheck lamp2does not light upafter pressingthe6or7button,thebattery is discharged.
Replacingthe SmartKeybattery (→page64).
Activating/deactivating the acoustic lockingverification signal
Multimedia system:
VehicleîVehicle SettingsAcous-
tic Lock
Activatesor deactivateSthe function.
Activating/deactivating the panic alarm
Requirements:RThe ignition is switched off
The panic alarm function is onlyavailable incertain countries.
Toactivate:press button1for approx‐imatelyone second.A visual and audible alarm is triggered.Todeactivate:briefly press button1again.
or
Pressthestart/stop button onthe cockpit(the SmartKeyis insidethevehicle).
Changingthe unlocking settings
Possible unlocking functions ofthe SmartKey:
RCentral unlocking
RUnlockingthe driver's door and fuelfillerflap
Toswitch between settings:pressthe6and7buttons simultaneouslyforapproximately six seconds untilthe batterycheck lampflashes twice.
Ifthe unlocking functionforthe driver's doorand fuelfillerflap has been selected:
RPressingthe6button a second time cen‐trally unlocksthevehicle
RVehicles with KEYLESS-GO:Ifyoutouchthe inner surface ofthe door handle onthedriver's door, onlythe driver's door and fuelfillerflap are unlocked.
Deactivatingthe SmartKeyfunctions
Ifyou do not usethevehicle or a SmartKey foranextended period of time,you canreducetheenergy consumption oftherespective Smart‐Key .Todo so, deactivatethe SmartKeyfunc‐tions.
Opening and closing63

Todeactivate:pressthe7button ontheSmartKeytwice inquick succession.The batterycheck lamp ofthe SmartKeyflashes twice brieflyand lights up once.
Toactivate:press any button onthe Smart‐Key.
Whenthevehicle isstarted withthe Smart‐Key inthestowage compartment ofthe cen‐ter console,the SmartKeyfunctions areautomaticallyactivated (→page139).
Removing/inserting the emergencykey
Toremove:pressrelease button1.Emergencykey2is pushed out slightly.
Pull out emergencykey2until it engages inthe intermediate position.
You can usethe intermediate position ofemergencykey2toattachthe SmartKeytoakeyring.
Pressrelease button1again and fullyremoveemergencykey2.
Toinsert:pressrelease button1.
Insert emergencykey2tothe intermediateposition or fully until it engages.
Replacing the SmartKeybattery
\nDANGERSerious damagetohealthcausedbyswallowing batteries
Batteries containtoxic and corrosive sub‐stances. Swallowing batteries may causeserious damagetohealth.
There is arisk offatal injury.
Keep batteries out ofthereach ofchil‐dren.
If batteries are swallowed, seek medicalattention immediately.
ENVIRONMENTALNOTEEnvironmentaldamagecausedbyimproper disposal ofbatteries
Batteries contain pollutants. It isillegaltodispose ofthem withthe householdrubbish.

Dispose of batteries in anenvironmentallyresponsible manner.Takedischarged batteriestoaqualifiedspecialistworkshop ortoa collectionpointfor used batteries.
64Opening and closing

Locking/unlockingthe driver's door withtheemergencykey
Ifyou wishtolockthevehicle entirely usingthe emergencykey,first pressthe buttonforlocking fromthe inside whilethe driver'sdoor is open. Then proceedtolockthe driv‐er's door usingthe emergencykey.
Insertthe emergencykey asfar as it will gointo opening1inthe cover.
Pull and holdthe door handle.
Pullthe cover onthe emergencykey asstraight as possibleawayfromthevehicleuntil itreleases.
Releasethe door handle.
Tounlock:turnthe emergencykey counter-clockwisetopositionG.
Tolock:turnthe emergencykey clockwisetopositionG.
Carefully pressthe cover ontothe lock cylin‐der until it engages and is seatedfirmly.
Trunk
Openingthe trunk lid
\nDANGERRisk ofexhaustgas poisoning
Combustion engines emit poisonousexhaustgases such as carbon monoxide. Exhaustgases can enterthevehicle interior ifthetrunk lid is open whenthe engine isrunning,especially ifthevehicle is in motion.
Always switch offthe engine beforeopeningthe trunk lid.
Never drive withthe trunk lid open.
70Opening and closing

Vehicles with trunk lid convenience clos‐ingfeature:Press trunk lidremoteoperatingswitch1.
Vehicles with trunk lid convenience clos‐ingfeature:Press closing button1onthetrunk lid.
Vehicles with trunk lid convenience clos‐ing and KEYLESS-GO:Press locking button2onthe trunk lid.If a SmartKeyis detected outsidethevehicle,the trunk lid will close andthevehicle will belocked.
Trunk lid automaticreversing functionIf an object obstructsthe trunk lid duringtheautomatic closing process,the trunk lid willopen again automatically.The automaticrevers‐ing function is only an aid and is not a substituteforyour attentiveness.
When closing, make surethat no body partsare inthe closing area.
\nWARNINGRisk of becoming trappeddespitethereversing function
Thereversing function does notreact:
Rtosoft, light andthin objects, e.g.fingers.
Roverthe last

If someone is trapped,releasethe but‐ton immediately or pressthe button inordertoreopenthe side window.
\nWARNINGRisk of becoming trappedwhenchildren operatethe side windows
Children could become trapped iftheyoper‐atethe side windows, particularly when unat‐tended.
Activatethechild safety lockfortherear side windows.
When leavingthevehicle, alwaystakethe SmartKeywithyou and lockthevehicle.
Never leavechildren unattended inthevehicle.
Requirements:RThe power supply orthe ignition is switchedon.
1Closes
2Opens
The buttons onthe driver's doortakeprece‐dence.
Tostart automatic operation:pressthebbutton beyondthe point ofresistanceor pull andrelease it.
Tointerruptautomatic operation:press orpullthebbutton again.
Whenthevehicle is switched off,the side win‐dowscan continue being operated.
The function isavailablefor aroundfiveminutesor until a door is opened.
Automaticreversing function ofthe side win‐dowsIf an object blocksa side windowduringtheclosing process,the side window opens againautomatically.The automaticreversing functionis only an aid and is not a substituteforyourattentiveness.
When closing, make surethat no body partsare inthe closing area.
\nWARNINGRisk of becoming trappeddespitethere beingreversing protectiononthe side window
Thereversing function does notreact:
RTosoft, light andthin objects, e.g.fingers
RDuringresetting
78Opening and closing

Toclosetheroller sunblinds:press andholdthe7button again.
Convenience closing can also be operatedwithKEYLESS-GO (→page67).
Problems withthe side windows
ProblemPossible causes/consequences andPPSolutions
A side window cannotbe closed andyou cannot seethe cause.
Checktosee whether any objects are inthe window guide.
\nWARNINGRisk of becoming trapped orfatally injured ifreversing protection is not activated
Ifyou close a side windowagain immediately after it has been blocked orreset,the side window closeswith increased or maximumforce. Thereversingfeature isthen not active.
Parts ofthe body could become trapped inthe closing area inthe process.
Make surethat no parts ofthe body are inthe closing area.
Tostopthe closing process,releasethe button or pressthe button againtoreopenthe side win‐dow.
If a side window is obstructed during closing andreopens again slightly:
Immediately afterthe window is blocked, pullthe corresponding switch again untilthe side window hasclosed, and holdthe switchfor an additional second.The side window will be closed with increasedforce.
If a side window is obstructed again during closing andreopens again slightly:
80Opening and closing