2019 LINCOLN MKT steering

[x] Cancel search: steering

Page 316 of 575

LINCOLN MKT 2019  Owners Manual GENERAL INFORMATION
Use only approved wheel and tire sizes,using other sizes could damage your vehicle.If you change the diameter of the tires fromthat fitted at the factory, the speedometermay not di

Page 318 of 575

LINCOLN MKT 2019  Owners Manual •Higher - to allow higher load carryingcapacity and to allow it to travel overrough terrain without getting hung up ordamaging underbody components.
•Shorter - to give it the capability toapproach

Page 331 of 575

LINCOLN MKT 2019  Owners Manual USING SNOW CHAINS
WARNING: Snow tires must be thesame size, load index, and speed rating asthose originally provided by Ford. Use ofany tire or wheel not recommended byFord can affect the safety and p

Page 336 of 575

LINCOLN MKT 2019  Owners Manual When Inflating Your Tires
When putting air into your tires (such as at agas station or in your garage), the tirepressure monitoring system may not respondimmediately to the air added to your tires.
It

Page 376 of 575

LINCOLN MKT 2019  Owners Manual DescriptionItemCallout
This shows the temperature the driver selects through the climate control system.Driver TemperatureA
When you activate the heated steering wheel option on the touch screen, this

Page 379 of 575

LINCOLN MKT 2019  Owners Manual InformationOption
Information for current audio playing.Audio
Select source.
View current road and speed limit (if information is available).Navigation
View current route, next turn, time to your dest

Page 380 of 575

LINCOLN MKT 2019  Owners Manual Note:If your vehicle is not equipped withnavigation, compass appears in the displayinstead of navigation. If you press the rightarrow to go into the compass menu, you cansee the compass graphic. The c

Page 382 of 575

LINCOLN MKT 2019  Owners Manual To make sure that 911 Assist works correctly:
•SYNC must be powered and workingproperly at the time of the incident andthroughout feature activation and use.
•The 911 Assist feature must be set on