Page 105 of 600

1052. Instrument cluster
2
Instrument cluster
GS450h_300h_OM_OM30F92E_(EE)
Engine coolant temperature gauge
Displays the engine coolant temperature
Tachometer/Hybrid System Indicator
Tachometer: Displays the engine speed  in revolutions per minute. 
Hybrid System Indicator: Displays hybrid system outp ut or regeneration level (P. 108)
Outside temperature
Displays the outside temperature within the range of -40C (-40F) to 50C (122 F). Low outside temperature indicator comes on when the ambient temperature 
is 3 C (37F) or lower.
Clock
Time displayed is linked to the analog clock on the instrument panel. (P. 378)
Speedometer
Displays the vehicle speed
Fuel gauge
Displays the quantity of fuel remaining in the tank
Multi-information display
Presents the driver with a variety of driving-related data (P. 111) 
Displays warning messages in  case of a malfunction (P. 466)
Odometer, trip meter, maintenance required information and speed warning 
display
Odometer: Displays the total distance the vehicle has been driven 
Trip meter: 
Displays the distance the vehicle has been  driven since the meter was last reset. Trip meters “A” and “B” can be used to record and display different distances inde-pendently. 
Maintenance required information: • Displays the maintenance required information when the power switch is inON mode. 
• It can be reset from   of the multi-information display. ( P. 111) 
Speed warning: 
Displays a warning when the speed set in    of the multi-information display is exceeded. ( P. 562)
Shift position and shift range
Displays the selected shift position or selected shift range (P. 224)
1
2
3
4
5
6
7
8
9 
     
        
        Page 107 of 600
1072. Instrument cluster
2
Instrument cluster
GS450h_300h_OM_OM30F92E_(EE)
Switches between odometer, trip meter 
and maintenance required information 
displays. When the trip meter is dis- 
played, pressing and holding the button 
will reset the trip meter. 
The brightness of the instrument panel lights can be adjusted. 
Darker 
Brighter
Changing the display
Instrument panel light control
1
2 
     
        
        Page 115 of 600

1152. Instrument cluster
2
Instrument cluster
GS450h_300h_OM_OM30F92E_(EE)
■Display off 
A blank screen is displayed
*1: Displayed when the item is set in “Drive Info 1”, “Drive Info 2” or “Drive Info 3”.  
( P. 562)
*2: The function can be reset by pressing the   of the meter control switches for longer 
than 1 second when the item to reset is displayed. 
If there is more than one item that can be  reset, the item selection screen will appear.
The settings of the following items can be changed, refer to P. 561
For functions that can be enabled or disabled, the function switches between on and 
off each time   is pressed.
■ (Lane-Keeping Assist) (if equipped) ( P. 282)
■ (Pre-Crash Safety system) (if equipped) (P. 270)
■ (Adaptive Front-lighting System) (if equipped) (P. 239)
■ (Blind Spot Monitor) (if equipped) (P. 314)
■
Select to turn the speed warning on and off, or to change the speed at which 
the speed warning is displayed.
■ (Road Sign Assi st) (if equipped) (P. 291)
■
Select to set the display mode of the clock.
■ 
●Oil Maintenance ( P. 408)
●TPMS (Tire pressure warning system) (if equipped) (P. 418)
Settings display 
     
        
        Page 408 of 600

4086-3. Do-it-yourself maintenance
GS450h_300h_OM_OM30F92E_(EE)
■After changing the engine oil 
The engine oil maintenance data should be reset. Perform the following procedures: 
Press   or   of the meter control switch and select  .
Press   or   of the meter control switch an d select “Vehicle Settings”. Then press 
. 
Press   or   of the meter control switch  and select “Oil Maintenance”. Then press 
. 
Select the “Yes” and press  . 
A message is displayed on the multi-informa- tion display.
WARNING
■Used engine oil
●Used engine oil contains potentially harm ful contaminants which may cause skin dis- orders such as inflammation and skin cancer, so care should be taken to avoid pro- 
longed and repeated contact. To remove used engine oil from your skin, wash thoroughly with soap and water.
●Dispose of used oil and filters only in a safe and acceptable manner. Do not dispose of 
used oil and filters in household trash, in sewers or onto the ground.  Call any authorized Lexus retailer or Le xus authorized repairer, or any reliable repairer, service station or auto parts st ore for information concerning recycling or 
disposal.
●Do not leave used engine oil within the reach of children.
NOTICE
■To prevent serious engine damage 
Check the oil level on a regular basis.
■When replacing the engine oil
●Be careful not to spill engine oil on the vehicle components.
●Avoid overfilling, or the  engine could be damaged.
●Check the oil level on the dipstick every time you refill the vehicle.
●Be sure the engine oil filler cap is properly tightened.
1
2
3
4
5 
     
        
        Page 487 of 600

4877-2. Steps to take in an emergency
7
When trouble arises
GS450h_300h_OM_OM30F92E_(EE)
Indicates that the outside temperature is approximately 
3 C (37F) or lower A buzzer also sounds. Drive carefully, as the road may be icy.
Indicates that the engine oil is scheduled to be changed  Check the engine oil and change if necessary. After changing the engine oil, the oil change system 
should be reset. ( P. 406) (The indicator will not work properly unless the oilmaintenance data has been reset.)
(If equipped)
Indicates that the fuel in jectors require maintenance 
soon  Have any authorized Lexus retailer or Lexus autho- rized repairer, or any reliable repairer replenish the 
injector cleaner to the fuel tank and reset the mes- sage as necessary.
Indicates that the engine oil and oil filter should bechanged Have the engine oil and oil filter checked and/or 
changed by any authorized Lexus retailer or Lexus authorized repairer, or any reliable repairer. Afterchanging the engine oil, the oil change system 
should be reset. ( P. 406)
(If equipped)
Indicates that the fuel injectors require maintenance 
 Have any authorized Lexus retailer or Lexus autho- rized repairer, or any reliable repairer replenish theinjector cleaner and reset the message.
Warning messageDetails/Actions