2019 INFINITI QX60 Quick Reference Guide

6
Meters and Gauges
Tachometer
Engine coolant temperature gauge
Shift lever indicator
Vehicle information display
Speedometer
Fuel gauge
3499324_19b_QX60_US_QRG_062118.indd 66/21/18 9:46 AM

7
Opening the Liftgate
To operate the liftgate hands-free:

•
E
nsure you have the Infiniti Intelligent Key within 31.5 in (80 cm)
of the liftgate.


•
U
se a quick kicking motion under the center of rear bumper
.
After 2 seconds, the vehicle will beep three times and the liftgate
will open.
•


Do no

t swing foot side to side or pause during kicking motion.
Please see your Owner’s Manual for important safety information, system limitations, and
additional operating and feature information.
Motion-Activated Liftgate
(if so equipped)
To open the liftgate, perform one of the following procedures:
•

Push the po
wer liftgate switch
on the instrument panel.
•


Push the lift

gate opener switch
; the liftgate must be unlocked,
or you must have the Intelligent Key with you (that is, in your
pocket or purse).
•


Press the
button on the Infiniti Intelligent Key for longer
than 1 second.
Please see your Owner’s Manual for important safety information, system limitations, and
additional operating and feature information.
ACTIVE REGION
Type AType B
3499324_19b_QX60_US_QRG_062118.indd 76/21/18 9:46 AM

8
Outside MirrorsDynamic Driver Assistance Switch
(if so equipped)
Adjusting the outside mirrors:
•


T
o adjust the outside
mirrors, move the switch

right or left to select the
right or left mirror.
•


A

djust the position of the
mirror using the directional
control switch
.
Folding the outside mirrors:
To fold the mirrors closed, push
the
switch . To open the
mirrors, push the
switch .
REVERSE TILT-DOWN FEATURE (IF SO EQUIPPED)
When backing up the vehicle, the outside mirrors will
turn downward automatically to provide better rear
visibility. To enable the reverse tilt-down feature, move
the switch
to either the left or right position.
If the switch
is set in the center (neutral) position,
the mirror will not tilt down when reversing.
Please see your Owner’s Manual for important safety information, system
limitations, and additional operating and feature information.
The Dynamic Driver Assistance switch can be used to temporarily turn on and
off the following systems:
•


Lane Departur

e Prevention (LDP): The LDP system helps warn the driver with a
warning indicator and chime and helps assist the driver to return the vehicle to
the center of the traveling lane.
•


Dist

ance Control Assist (DCA): The DCA system helps assist the driver to
maintain a following distance from a vehicle ahead by activating the brakes and
moving the accelerator pedal upward to decelerate smoothly.
•


Blind Spo

t Intervention
® (BSI): The BSI system helps alert the driver of other
vehicles in adjacent lanes when changing lanes with the side indicator light
and chime. It also helps assist the driver to return to the center of the current
traveling lane when another vehicle is present in the adjacent lane.
Please see your Owner’s Manual for important safety information, system limitations, and additional operating
and feature information.
3499324_19b_QX60_US_QRG_062118.indd 86/21/18 9:46 AM

9
Wiper and Washer Switch2nd Row Seats
Move the lever up or down to one of the following positions to
operate the windshield wipers:
MIST
One sw

eep operation
OFF

Wipers ar

e off
AUTO

Speed-sensing and r
ain-sensing (if so equipped) automatic wipe
LO



C

ontinuous wipe, slow
HI

C

ontinuous wipe, fast
To adjust the wiper sensitivity for the AUTO setting, twist the control
ring
. The rain-sensing function (if so equipped) can be disabled in
the vehicle information display under “Vehicle Settings”. Pull the lever
toward you operate the windshield washer.
REAR WIPER AND WASHER
Turn the rear wiper switch
to one of the following positions to
operate the rear wiper:
OFF

Wiper

is OFF
INT
In

termittent wiping
ON

C

ontinuous wipe, slow
Push the lever
forward to operate the rear windshield washer.Please see your Owner’s Manual for important safety information, system limitations, and
additional operating and feature information.
Forward and backward adjustment:
Pull the center of the bar
up and hold it while you slide the seat
forward or backward to the desired position until it latches.
Seat angle adjustment:
Pull up on the lever
and lean back until the seat latches. To bring
the seatback forward, pull the lever up and lean your body forward
until it latches.
MULTI-MODE/CHILD SEAT ACCESS FUNCTION
On the passenger’s side of the vehicle, the 3
rd row can be accessed
without removing a child seat installed in the 2nd row.
•


Lift up on the seatback

release lever
and slide the entire
seat forward.
•


T

o return the seat to a locked position, push the upper seatback
rearward until the seatback and track are locked.
Please see your Owner’s Manual for important safety information, system limitations, and
additional operating and feature information.
3499324_19b_QX60_US_QRG_062118.indd 96/21/18 9:47 AM

10
USB Connection Ports
The USB ports are located in the center console under the armrest and below the climate
controls
(if so equipped).
•


When a c
ompatible USB memory device or iPod® is plugged into one of the USB ports,
compatible audio files stored on the device can be played through the vehicle’s audio system.
•


These ports will also char

ge compatible devices.
USB/iPOD
® CHARGING PORTS
•


Ther

e is a USB port located in the 2nd row on the back of the center console and a port in the
3rd row located above the cup holders . These ports will charge compatible devices.
Please see your Owner’s Manual for important safety information, system limitations, and additional operating and
feature information.
3499324_19b_QX60_US_QRG_062118.indd 106/21/18 9:47 AM

11
Remote Engine Start* (if so equipped)
Two positions for the driver’s seat,
steering column and outside mirrors
can be stored in the automatic
drive positioner memory. To set a
memory position:
1.

Plac
e the ignition switch in the ON
or ACC position. (The vehicle should
be stopped while setting the memory.)
2.


A
djust the driver’s seat, steering column and outside mirrors
to the desired positions using the adjusting switches for
each feature.
3

.
Push the
SET switch
, and within 5 seconds, push the memory
switch (1 or 2)
. The indicator light for the memory switch you
select will illuminate for approximately 5 seconds and a chime will
sound when the memory is stored.
4.



Pr

ess the unlock button on the key fob to link the memorized
position to your Infiniti Intelligent Key.
The driver’s seat and steering column will automatically move when
the shift lever is in the P (PARK) position to allow the driver to get
in and out of the driver’s seat more easily. “Exit Seat Slide” and “Exit
Steering UP” can be disabled in the vehicle information display under
“Vehicle Settings”.
Please see your Owner’s Manual for important safety information, system limitations, and
additional operating and feature information.
Automatic Drive Positioner
(if so equipped)
To start your vehicle remotely, press the button
on the Infiniti Intelligent Key, and within 5
seconds, press and hold the remote engine start
button for at least 2 seconds.
•


A

utomatic climate control will begin heating or
cooling the vehicle based on the temperature
inside and outside the vehicle.
•


The engine will run f
or 10 minutes and then
turn off. To extend the time for an additional
10-minute period, repeat the procedure.
•


T

o start driving, depress the brake pedal and
push the ignition switch.
Remote engine start can be enabled or disabled
through the vehicle information display.
HEATED STEERING WHEEL (if so equipped)
The heated steering wheel may be activated
during remote engine start when outside and cabin
temperatures are low.
During remote start, the heated steering wheel
switch will be inoperable until the ignition switch
is turned on.
* State laws may apply; review local laws before using.
Please see your Owner’s Manual for important safety information,
system limitations, and additional operating and feature information.
Type A
Type B
3499324_19b_QX60_US_QRG_062118.indd 116/21/18 9:47 AM

12
Heater and Air Conditioner (automatic)
Front defroster button
Rear window and outside mirror defroster switch
Climate control system OFF button
Fan speed control buttons
AUTO
climate control ON button: turns on automatic mode
Air recirculation button
CLIMATE button: displays climate control screen on the center display
Driver’s side temperature control buttons
Air flow control button
DUAL/SYNC button: turns the dual/sync mode on or off
Passenger’s side temperature control buttons REAR CLIMATE CONTROL
REAR ON-OFF button (located on center console)
OFF button: turns off rear climate control system
Rear fan speed control buttons
Rear AUTO
button: turns on automatic mode
Rear temperature control buttons
Please see your Owner’s Manual for important safety information, system limitations, and
additional operating and feature information.
Type BType B
3499324_19b_QX60_US_QRG_062118.indd 126/21/18 9:47 AM

13
Connecting your Cellular Phone
or Device via Bluetooth
®*
Using Bluetooth® technology, you can
connect (pair) your cellular phone with the
in-vehicle system for hands-free use of your
cellular phone.
1.



Pr

ess the SETTING button on the
control panel.
2.



Select the

“Phone/Mail” key.
3

.

Select

“Connect Device”.
4.



Select

“Add New (X/5 Free)”.
5.



I

f a PIN appears on the screen, operate
the Bluetooth
® device to enter/
confirm the PIN.
For any Bluetooth
® connectivity issues, reboot your cellular
phone or device.
* Some jurisdictions prohibit the use of cellular telephones while driving.
Please see your INFINITI InTouch™ Owner’s Manual for important safety information, system
limitations, and additional operating and feature information.
If you have a compatible Bluetooth® device with streaming audio
(A2DP and AVRCP profiles), you can set up a wireless connection
between your Bluetooth
® device and the in-vehicle audio system,
enabling you to listen to the audio from your device through the
vehicle’s audio system.
To switch to Bluetooth
® Streaming Audio after connecting your
Bluetooth® device:
1.

Press the MEDIA button on the control panel.
2.

Touch the “Source” key
.
3

. Then, touch the “Bluetooth Audio” key
.
For any Bluetooth
® connectivity issues, reboot your cellular
phone or device.
Please see your INFINITI InTouch™ Owner’s Manual for important safety information,
system limitations, and additional operating and feature information.
Bluetooth® Streaming Audio
3499324_19b_QX60_US_QRG_062118.indd 136/21/18 9:47 AM