Page 9 of 24
6
Meters and Gauges
Engine coolant temperature gauge
Tachometer
Shift lever indicator
Vehicle information display
Fuel gauge
Speedometer
Page 10 of 24
7
Fuel-filler Door
To open the fuel-filler door,
unlock the vehicle and gently
push the middle left side of
the
fuel-
filler door.
Please see your Owner’s Manual for
important safety information, system
limitations, and additional operating
and feature information.
Passenger Rear Seat Entry/Exit
To access the rear seat:
1.
Pull the le
ver
upward to fold the seatback forward.
2.
Pr
ess the button
to slide the front seat forward
and press the button
again to stop the seat.
To return the front seat to its original position:
1.
Pull the le
ver
upward and push the seatback to the
locked, upright position.
2.
Pr
ess the button
to slide the front seat backward.
Please see your Owner’s Manual for important safety information, system limitations,
and additional operating and feature information.
Lower Display Menu Buttons
The lower display menu buttons are located below the lower display on
the instrument panel.
Press to display the main audio screen.
Press to display the main menu screen.
Press to display the main climate screen.
Please see your INFINITI InTouch™ Owner’s Manual for important safety information, system
limitations, and additional operating and feature information.
Page 11 of 24
8
Wiper and Washer Switch
Move the lever up or down to one of the following
positions to operate the windshield wipers:
MIST
One sw
eep operation
OFF
Wipers ar
e OFF
AUTO
Speed-sensing and r
ain-sensing
(if
so equipped) automatic wipe
LO
C
ontinuous wipe, slow
HI
C
ontinuous wipe, fast
To adjust the wiper sensitivity for the AUTO setting, twist
the control ring
.
Pull the lever
toward you to operate the
windshield washer.
WIPER BLADE REPLACEMENT PROCEDURE
The windshield wipers must be in the service position
in order to replace the wiper blades.
To move the wiper blades to the service position:
•
When the ignition swit
ch is in the ON position or
within 60 seconds of placing the ignition switch
in the OFF position, lift the windshield wiper and
washer lever upwards twice in less than 0.5 seconds.
The windshield wipers will move to the service
position automatically, and the wiper blades can
now be replaced.
To move the wiper blades back to the original position:
•
Plac
e the wiper arm in the down position and lift the wiper and washer lever up for
more than 1 second, or lower the lever down to operate at any wiper speed.
To turn the rain sensor function on and off:
1.
Pr
ess the MENU button below the lower display.
2.
T
ouch the “Settings” key and then the “Vehicle”
key
on the display.
3
.
T
ouch the “Rain Sensor” key
to toggle the
feature ON and OFF.
When the rain-sensing function is disabled, the AUTO
position on the wiper stalk will work in conventional
intermittent mode.
Please see your Owner’s Manual for important safety information, system limitations, and additional operating and feature information.
Page 12 of 24
9
Automatic Power Windows
Your power windows have an
automatic adjusting function
to ensure windows close
completely to help seal against
wind noise and weather leaks.
• When the fr
ont doors are opened,
the windows automatically
lower slightly to avoid contact
between the windows and
the side roof panels.
If your vehicle’s battery is discharged
or disconnected, your power window
automatic function will not operate.
• R
efer to your Owner’s Manual
for information to initialize your
power window system.
• I
f the power window functions
do not operate properly after
initializing the system, it is
recommended that you have
your vehicle checked by an
Infiniti retailer.
Please see your Owner’s Manual for important
safety information, system limitations, and
additional operating and feature information.
User Registration
Up to three users can have their
driving positions, navigation, climate
controls, etc., memorized.
To register a new user:
1.
Press the MENU button
below the lower display.
2.
T
ouch the right arrow key “
” on
the lower display until “Infiniti
InTuition”
is displayed.
Then touch the “Infiniti
InTuition” key
.
3
.
T
ouch “User List”.
4.
T
ouch “Add New”. From
here, you can edit
Name
and Icon . 5. T
ouch “OK” when finished.
Please see your INFINITI InTouch™ Owner’s
Manual for important safety information, system
limitations, and additional operating and feature
information.
Page 13 of 24
10
Connecting your Cellular Phone
or Device via Bluetooth
®*
Bluetooth® Streaming Audio*
If you have a compatible Bluetooth® device with streaming audio
(A2DP and AVRCP profiles), you can set up a wireless connection
between your Bluetooth
® device and the in-vehicle audio system,
enabling you to listen to the audio from your device through the
vehicle’s audio system.
After connecting your Bluetooth
® device, press the DISC•AUX
button
on the control panel to switch to Bluetooth®
Streaming Audio.
For any Bluetooth
® connectivity issues, reboot your cellular
phone or device.
* Some jurisdictions prohibit the use of cellular telephones while driving.
Please see your INFINITI InTouch™ Owner’s Manual for important safety information,
system limitations, and additional operating and feature information.
Using Bluetooth® technology, you can
connect (pair) your cellular phone with
the in-vehicle system for hands-free use
of your cellular phone.
1.
Pr
ess the MENU button on the
Infiniti controller.
2.
T
ouch the “Settings” key on the
center display.
3
.
T
ouch the “Phone/Mail” key.
4.
T
ouch “Connect Device”.
5.
T
ouch “Add New (X/ 5
Free)”.
6.
When a PIN appears on the scr
een,
operate the Bluetooth
® device to
enter/confirm the PIN.
For any Bluetooth
® connectivity issues, reboot your cellular phone or device.
* Some jurisdictions prohibit the use of cellular telephones while driving.
Please see your INFINITI InTouch™ Owner’s Manual for important safety information, system
limitations, and additional operating and feature information.
Page 14 of 24
11
FM/AM/HD Radio®/SiriusXM® Satellite RadioSiriusXM® Travel Link
and SiriusXM
® Traffic
(if so equipped)
Your vehicle’s Navigation System is
equipped with SiriusXM Travel Link and
SiriusXM Traffic capabilities.
SiriusXM Travel Link provides access
to real-time weather information and
forecasts, nearby fuel prices, movie listings,
sports scores and stock quotes.
SiriusXM Traffic provides information that
may help to avoid delays due to traffic
incidents. Traffic jams, roadwork, road
closures around the current location, etc.,
are represented graphically on the map
by icons depicting the nature of the event.
Incidents on the route are automatically
displayed as they are approached.
Please see your INFINITI InTouch™ Owner’s Manual for
important safety information, system limitations, and
additional operating and feature information.
The AUDIO button displays the audio screen.
The power button turns the system on or off. Turning the knob adjusts the volume.
Change stations with the or buttons. This applies to satellite, HD Radio® and CDs.
Manually tune the radio through the or buttons.
The RADIO button changes the radio in the order of AM, FM and satellite radio.
The DISC • AUX button changes the audio source.
Touch and hold the desired station to store a preset. This applies to AM, FM , or satellite
radio stations.
Please see your INFINITI InTouch™ Owner’s Manual for important safety information, system limitations, and additional
operating and feature information.
Page 15 of 24
12
Cruise Control
CONVENTIONAL CRUISE CONTROL (if so equipped)
INTELLIGENT CRUISE CONTROL (ICC) (if so equipped)
5
4
SETTING A CRUISING SPEED
•
Push the cruise c
ontrol MAIN (ON-OFF) switch
to turn on the system.
•
With the
vehicle at the desired speed, push down the control switch
to
SET
to enable cruise control.
•
The cruising speed c
an be adjusted to a higher or lower speed by toggling the
control switch
up or down.
CANCELING THE PRESET SPEED
•
Push the CANCEL switch
or tap the brake pedal.
INTELLIGENT CRUISE CONTROL (ICC) (IF SO EQUIPPED)
The ICC system is designed to maintain a selected distance from the vehicle in front
of you and reduce the speed to match a slower vehicle ahead.
•
T
o increase the distance to the vehicle ahead to be maintained by the ICC
system, push the distance switch
until the display shows the desired set
distance, which is shown by the number of lines on the set distance indicator
.
•
When a
vehicle is detected ahead, a vehicle ahead detection indicator
will
illuminate and your vehicle will reduce the speed to match the slower vehicle.
Please see your Owner’s Manual for important safety information, system limitations, and additional operating
and feature information.
Page 16 of 24
13
Idle Stop/Start (ISS) (if so equipped)
The ISS activates to prevent unnecessary fuel consumption, exhaust emissions
and noise.
•
When the br
ake pedal is depressed and the vehicle is stopped, the engine will
stop automatically.
•
When
you release your foot from the brake pedal, the engine will
restart automatically.
•
The ISS indic
ator light
will inform you of the ISS status.
•
The s
ystem can be temporarily deactivated by pushing the Idle Stop OFF
AUTOOFF switch .
•
Ther
e are certain conditions in which the ISS will not activate, including:
•
When the br
ake pedal is not firmly depressed.
•
When the st
eering wheel is operated or wheels are not pointed straight ahead.
•
When the engine is w
arming up.
•
When the c
abin temperature is below 68°F (20°C) or above 86° F (30°C).
•
When the fr
ont/rear defroster is on or fan speed is at maximum.
•
Please r
efer to the “Starting and driving (section 5)” of your Owner’s Manual for
the additional conditions in which the ISS will not activate.
Please see your Owner’s Manual for important safety information, system limitations, and additional operating and
feature information.
