6
ELECTRIC PARKING BRAKE
ELECTRONIC PRECISION SHIFT TRANSMISSION
The Electronic Precision Shift transmission
control switches are located on the front
console . The selected gear position illuminates in red on the switch . Bring the vehicle to a
complete stop before shifting the transmission .
Park – Press the P button to shift to Park .
Reverse – Pull the R switch to shift to Reverse .
Neutral – Press the N button to shift to Neutral .
Drive – Pull the D switch to shift to Drive .
ELECTRONIC RANGE SELECT (MANUAL) MODE
Electronic Range Select Mode allows you to choose the top gear limit . It can be used to limit the vehicle’s speed when driving on a downhill grade or towing a trailer .
1 . Press the L (Low) button .
2 . Press the + (plus) or – (minus) button to increase or decrease the gear range available . The current gear is displayed on the Driver Information Center .
If vehicle speed is too high or low for the requested gear, the shift will not occur .
CAR WASH MODE
The Car Wash Mode enables the vehicle to remain in Neutral when using automatic car washes. There are different procedures for when the driver remains in or exits the vehicle and for vehicles equipped with a gasoline or diesel engine . Refer to your Owner’s Manual for more information .
See Driving and Operating in your Owner’s Manual .
To apply the parking brake, press the Parking Brake button on the left side of the instrument panel .
To release the parking brake, turn on the ignition, press the brake pedal, and then press the button .
Note: The parking brake will release automatically if the vehicle is running, placed into gear and an attempt is made to drive.
See Driving and Operating in your Owner’s Manual .
