2019 GMC TERRAIN mirror controls

2
Turn Signal Lever/IntelliBeam ButtonF
Driver Information Center
Steering Wheel Adjustment Lever
Audio Next-Previous Favorite Station Controls (behind steering wheel)
Windshield Wipers Lever
Engine Start-Stop ButtonCruise Control/Forward Collision AlertF/Heated Steering WheelF Buttons
Power Mirror/Window Controls
Power Liftgate ControlF
INSTRUMENT PANEL
Audio Volume Controls (behind steering wheel)
Driver Information Center Controls/Voice Recognition Buttons
Memory Seat ButtonsF
Exterior-Interior Lamp Controls/Electric Parking Brake Switch
Check Engine
Engine Oil Pressure
Lane Keep Assist Warning
Airbag Readiness
Cruise Control Set
Service Electric Parking Brake
Traction Control/StabiliTrak Active
Charging System
Security
Seat Belt Reminder
Brake System Warning
Electric Parking Brake
IntelliBeam Lighting
Symbols

7
STEERING WHEEL ADJUSTMENT
FRONT SEATS
F Optional equipment
With the vehicle parked, push down the lever under the steering column to adjust the steering wheel . The steering wheel can be moved up or down and in or out . Pull up the lever to lock the steering wheel in place .
See Instruments and Controls in your Owner’s Manual .
POWER SEAT ADJUSTMENTSF
A. Seat Adjustment
Move the horizontal control to move the seat forward or rearward and to tilt, raise or lower the seat .
B. Seatback Recline Adjustment
Move the top of the vertical control to recline or raise the seatback .
C. Lumbar Support Adjustment
Press and hold the rear control to adjust the lumbar support .
SET MEMORY SEAT POSITIONSF
With the ignition On or in Accessory mode:
1 . Adjust the seat and power outside mirrors to the desired positions .
2 . Press and release the SET button on the driver’s door . A beep will sound .
3 . Immediately press and hold button 1 or 2 until two beeps sound .
To store a seat position for when exiting the vehicle, repeat these steps using the Exit button .
RECALL MEMORY SEAT POSITIONSF
Press and hold button 1, 2 or Exit until the seat and mirrors reach the set position .
The memory/exit positions can be pro-grammed to be recalled automatically .
To set Seat Entry Memory and Seat Exit Memory, go to Settings > Vehicle > Seating Position .
FOLD-FLAT FRONT PASSENGER
SEATBACK
1 . Lower the head restraint and move the seat as far back as possible .
2 . Lift the recline lever (D) and fold the seatback forward .
To raise the seatback, lift the recline lever and fully raise the seatback .
See Seats and Restraints in your Owner’s Manual .
BAC
D

10
CLIMATE CONTROLS
F Optional equipment
Fan Speed Control or Driver’s Temperature ControlF
A/C Air Conditioning Control Vent Mode
Fan Speed Control/Power On-OffF
AUTO Automatic OperationF
Recirculation Mode
Rear Window Defog/Heated Outside Mirrors Control
Floor Mode Bi-level Mode
SYNCF Link passenger’s temperature setting to driver’s temperature setting
Defrost Mode
Passenger’s Temperature ControlF Defog Mode
AUTOMATIC OPERATIONF
Press AUTO .
Set the temperature .
The system automatically controls the fan speed, air delivery, air conditioning and
recirculation functions to maintain the set temperature . Allow time for the system to reach the desired temperature . If the functions are manually adjusted, full automatic operation is canceled .
AUTO DEFOGF AND AUTO REAR WINDOW DEFOGF
Auto Defog and Auto Rear Defog automatically turn on when the engine is started .
Go to Settings > Vehicle > Climate and Air Quality to turn the Auto Defog and Auto Rear Defog settings on or off.
See Climate Controls in your Owner’s Manual .
Dual Automatic Climate ControlsF shown