2019 FORD TRANSIT CONNECT brake

[x] Cancel search: brake

Page 326 of 493

FORD TRANSIT CONNECT 2019  Owners Manual WARNING: Always use the jack
provided as original equipment with your
vehicle. If using a jack other than the one
provided as original equipment with your
vehicle, make sure the jack capacity is
adequ

Page 329 of 493

FORD TRANSIT CONNECT 2019  Owners Manual Vehicle model.
A
Vehicle load.
B
Measure unit.
C
Rear tire pressure.
D
Front tire pressure.
E
Tire size.
F
Spare Tire Wagon
Van
Tire Size psi (bar)
psi (bar)
42 psi
(2.9 bar)
44 psi (3 bar)
215/55 R16

Page 337 of 493

FORD TRANSIT CONNECT 2019  Owners Manual VEHICLE IDENTIFICATION
NUMBER
The vehicle identification number is
located on the left-hand side of the
instrument panel.
Please note that in the graphic, XXXX is
representative of your vehicle identi

Page 339 of 493

FORD TRANSIT CONNECT 2019  Owners Manual Description
Code
Six-speed automatic trans-mission 6F35
6
TRANSMISSION CODE
DESIGNATION - 8-SPEED
AUTOMATIC TRANSMISSION The transmission code is on the Safety
Compliance Certification Label.  The
fol

Page 343 of 493

FORD TRANSIT CONNECT 2019  Owners Manual Materials
Specification
Name
WSS-M14P19-A
Motorcraft® Premium Windshield Wash Concen-
trate with Bitterant (U.S.)
Motorcraft® Premium Quality Windshield Washer
Fluid / Liquide lave-glace de haute qu

Page 344 of 493

FORD TRANSIT CONNECT 2019  Owners Manual Materials
Specification
Name
MERCON® ULVWSS-M2C949-A
Motorcraft® MERCON® ULV Automatic Transmis-
sion Fluid (U.S.)
Motorcraft® MERCON® ULV Automatic Transmis-
sion Fluid / MERCON® ULV huile pour

Page 347 of 493

FORD TRANSIT CONNECT 2019  Owners Manual Fuel Tank
Capacities
Quantity
Variant
15.8 gal (59.8 L)
All.
Washer Reservoir
Capacities Quantity
Variant
3.1 qt (2.9 L)
All.
Materials Specification
Name
WSS-M14P19-A
Motorcraft® Premium Windshield

Page 349 of 493

FORD TRANSIT CONNECT 2019  Owners Manual CAPACITIES AND
SPECIFICATIONS - 2.5L
Use oil and fluid that meets the defined
specification and viscosity grade.
If you do not use oil and fluid that meets
the defined specification and viscosity
grad