2019 FIAT FIORINO Owner handbook (in English)

REPLACING AN
EXTERIOR BULB
For the type of bulb and relevant power
rating, see “Changing a bulb”.
FRONT LIGHT CLUSTERS
The front light clusters fig. 140 contain
sidelight, dipped beam, main beam and
direction indicator bulbs.
The bulbs are arranged inside the light
cluster as follows:
A Side lights/tail lights and
main/dipped beam headlights;
B Direction indicators.SIDE LIGHTS
To replace the bulb, proceed as follows:
remove the protective cover A fig.
140;
turn the bulb holder A fig. 141
anticlockwise and remove it;
remove the bulb B and replace it;
refit the new bulb, insert the bulb
holder A fig. 141 again and then refit
the protective lid A fig. 140 correctly.DIPPED/MAIN BEAM
HEADLIGHTS
To change the bulb (double filament),
proceed as follows:
remove the protective cover A fig.
140;
release the bulb holder clip;
remove the bulb A fig. 142 from
connector B and replace it;
refit the new bulb by inserting it on
connector B and then make the
contour of the metallic part mate with
the grooves obtained on the headlight
parabola;
refit the bulb holder clip and refit the
protective lid A fig. 140 correctly.
140F0T0093
141F0T0094
142F0T0095
127

DIRECTION INDICATORS
Front
To replace the bulb, proceed as follows:
turn the protective lid B fig. 140
anticlockwise;
extract the bulb A fig. 143 and
replace it;
refit the protective lid B correctly.Side
To replace the bulb, proceed as follows:
adjust the lens A fig. 144 to
compress in the internal catch B fig.
145, then pull the cluster outwards;
turn the bulb holder C anticlockwise,
extract the press-fitted bulb D and
replace it;
refit the bulb holder C in the lens and
turn it clockwise;
refit the cluster making sure that the
internal catch B clips into position.FOG LIGHTS
(for versions/markets, where provided)
IMPORTANT Contact Fiat Dealership to
replace the front fog lights.
REAR LIGHT CLUSTERS
The rear light clusters contain the bulbs
for the side lights, direction indicators
and reversing/rear fog and brake lights.
To access the light clusters, proceed
as follows:open the rear swing doors;
loosen the screws A fig. 146 so as
to access the light cluster B fig. 147;
remove the connector C fig. 147.
143F0T0096
144F0T0097
145F0T0098
147F0T0100
128
IN AN EMERGENCY

The bulbs are arranged inside the light
cluster fig. 148 and fig. 149 as follows:
ABrake lights
BDirection indicators
CReverse lights
DSide lights/rear fog light
Pull the 5 tabs E fig. 148 outwards to
access the bulbs.THIRD BRAKE LIGHTS
Swing door versions
Contact Fiat Dealership to replace the
third brake lights fig. 150 .
NUMBER PLATE LIGHTS
Proceed as follows to replace the bulbs
A fig. 151:operate the holding tabs at the
points indicated by the arrows, and
remove the bulb holder;
146F0T0099148F0T0101
149F0T0102
150F0T0103
151F0T0104
129

turn the bulb holder B fig. 152
anticlockwise, then remove bulb C.
REPLACING
INTERIOR BULBS
For the type of bulb and relevant power
rating, see “Changing a bulb”.
FRONT CEILING LIGHT
Roof light with movable lens
To replace the bulbs, proceed as
follows:
extract the ceiling light A fig. 153 by
operating in the points shown by the
arrows;
open the lid B fig. 154 as shown;
remove bulb C fig. 154 by releasing
it from the side contacts, then insert the
new bulb and make sure it is correctly
clamped between these contacts;
close the lid and secure the ceiling
light into its housing, making sure it
locks properly into place.Front ceiling light with map reading
lights
(for versions/markets, where provided)
To replace the bulbs, proceed as
follows:
operate in the points indicated by
the arrows and remove light A fig. 155;
open protective flap B fig. 156;
152F0T0105
153F0T0106
154F0T0458
155F0T0143
130
IN AN EMERGENCY

replace the bulbs C releasing them
from the side contacts making sure that
the new bulbs are correctly secured
between the contacts;
re-close the lid B fig. 156 and secure
light A fig. 155 into its housing locking
it properly.
REAR CEILING LIGHT
Cargo versions
To replace the bulb, proceed as follows:
extract the ceiling light A fig. 157 by
operating in the points shown by the
arrows;
open the lid B fig. 158 as shown;
remove bulb C fig. 158 by releasing
it from the side contacts, then insert the
new bulb and make sure it is correctly
clamped between these contacts;
close the lid B fig. 158 and secure
the ceiling light into its housing, making
sure it locks properly into place.
close the lid B and secure the ceiling
light into its housing, making sure it
locks properly into place.
Combi versions
To replace the bulb, proceed as follows:
press button A fig. 159 and extract
the removable ceiling light B;
extract the ceiling light by operating
in the points shown by the arrows;
change the bulb C fig. 160 by
releasing it from the side contacts and
making sure the new bulb is correctly
fastened between these contacts.
156F0T0144
157F0T0107
158F0T0458
A
U
T
O
159F0T0108
A
U
T
O
160F0T0109
131

REPLACING FUSES
GENERAL INFORMATION
128) 129) 130) 131) 132)
31)
Fuses protect the electrical system:
they intervene (blow) in the event of a
failure or improper action on the
system.
When a device does not work, check
the condition of its protection fuse: the
filament A fig. 161 must be intact.
If it is not, replace the blown fuse with
another with the same amperage (same
colour).
B intact fuse.
C fuse with damaged filament.
To change a fuse, use the tweezers D
located in the tool box or the Fix&Go
container (for versions/markets where
provided).Refer to the tables on the following
pages to identify the protective fuse.
ENGINE BAY FUSE BOX
The fuse box is on the right-hand side
of the engine.
Removing the fuse box lid
Proceed as follows:
remove protective cover A fig. 162
from the positive battery terminal by
lifting it upwards;
press the tab A fig. 163 and remove
the fuse box protective cover B;
move the cover towards the
headlight, turning it anticlockwise (as
shown by the arrow) and then remove it
fig. 164;
the fuse box can be accessed in this
manner fig. 166.
32)
161F0T0015
162F0T0171
163F0T0172
164F0T0173
132
IN AN EMERGENCY

Refitting the fuse box lid
Proceed as follows to refit the lid:
insert the two tabs A fig. 165 in the
respective seats located on the fuse
box;
refasten the tab B in the
corresponding seat until it clicks.
165F0T0174
133

PROTECTED DEVICE - fig. 166 FUSE AMPERE
Spare (trailer kit)F09 10
Methane system solenoid valves (CNG) F09 10
HornsF10 10
Main beam headlightsF14 15
Rear power socketF15 15
166F0T0181
134
IN AN EMERGENCY