2019 FIAT FIORINO engine

IDENTIFICATION
DATA
It is advisable to take note of the
identification codes. Identification codes
are printed and shown on the plates
as indicated below, together with the
positions fig. 181:
AVehicle summary identification and
paintwork plate
BChassis marking
CEngine markingVEHICLE SUMMARY
IDENTIFICATION AND
PAINTWORK PLATE
This is stuck on the driver's door pillar
and shows the following data fig. 182:
AName of manufacturer
BType-approval number
CVehicle type identification code
DMaximum permitted weight of vehicle
fully laden
EMaximum permitted weight of vehicle
fully laden plus trailer
FMaximum permitted weight on first
axle (front)
GMaximum permitted weight on
second axle (rear)
HEngine type
IBodywork version code
LSpare part number
MBodywork colour code
NCorrect smoke coefficient value.IDENTIFICATION DATA
(For versions/markets, where provided)
Identification codes are printed and
shown on the plates as indicated
below, together with the positions fig.
183:
AVehicle identification number (VIN)
plate
BChassis marking
CBodywork paint identification plate
DEngine marking
181F0T0175
VERSIONE-VERSION
N° PER RICAMBI
N° FOR SPARES
MADE IN TURKEY
MOTORE-ENGINECODICE COLORE/PAINT
2 - 1 -
Kg
Kg
Kg
Kg
182F0V0725
183F0T0320
164
TECHNICAL DATA

VEHICLE IDENTIFICATION
NUMBER (VIN) PLATE
This is applied on the rear part of the
vehicle and contains the following data
fig. 184:
AName of manufacturer
BType-approval number
CVehicle type identification code
DProgressive chassis number
EMaximum permitted weight of vehicle
fully laden
FMaximum permitted weight of vehicle
fully laden plus trailer.
GMaximum permitted weight on first
axle (front)
HMaximum permitted weight on
second axle (rear)
IEngine type
LBodywork version code
MSpare part number
NSmoke opacity index (for diesel
engines)
CHASSIS MARKING
This is printed on the passenger
compartment floor, near the right front
seat.
Slide the hatch A fig. 185 forward to
access.
The marking includes:
type of vehicle;
chassis serial number.
BODYWORK PAINT
IDENTIFICATION PLATE
(For versions/markets, where provided)
This plate is applied inside the bonnet
and shows the following data fig. 186:
APaint manufacturer
BName
CFiat colour code
DRespray and touch up codeENGINE MARKING
It is stamped on the cylinder block and
includes the type and the engine serial
number.
CYLINDER MARKING
42)
Each methane cylinder is identified in
the plant by information stamped on
the cylinder cone.
This stamp contains:
CNG ONLY(type of gas which it is
designed for: compressed natural
gas only);
DO NOT USE AFTER XX-XXXX
(cylinder expiry date: month - year);
FABER(the name of the cylinder
manufacturer);
XX/XXXX/XXX(serial number of
the cylinder);
XX L(rated capacity of the cylinder
in litres);
184F0T0011
185F0T0084
186F0T0012
165

ENGINE
General information 1.4 Euro 6 1.3 MultiJet 80 HP Euro 6 1.3 MultiJet 95 HP Euro 6
Engine code 350A1000 225A2000 330A1000
Cycle Otto Diesel Diesel
Number and position of cylinders 4 in line 4 in line 4 in line
Piston bore and stroke (mm) 72 × 84 69.6 × 82 69.6 × 82
Total displacement (cm³) 1368 1248 1248
Compression ratio 11.1 16.8 16.8
Maximum power (EC) (kW) 57 59 70
Maximum power (EEC) (HP) 77 80 95
Corresponding engine speed (rpm) 6000 3750 3750
Maximum torque (EEC) (Nm) 115 200 200
Maximum torque (EEC) (kgm) 11.7 20.4 20.4
Corresponding engine speed (rpm) 3000 1500 1500
Spark plugs NGK ZKR7A-10 – –
FuelUnleaded petrol 95 R.O.N.
(EN228 specifications)Diesel for motor vehicles
(EN590 Specification)Diesel for motor vehicles
(EN590 Specification)
167

General information 1.4 Natural Power
Engine code350A1000
CycleOtto
Number and position of cylinders 4 in line
Piston bore and stroke (mm) 72 × 84
Total displacement (cm³) 1368
Compression ratio 11.1±0.2:1
PETROL METHANE
Maximum power (EC) (kW) 57 51
Maximum power (EEC) (HP) 77 70
Corresponding engine speed (rpm) 6000
Maximum torque (EEC) (Nm) 115 104
Maximum torque (EEC) (kgm) 11.7 10.6
Corresponding engine speed (rpm) 3000
Spark plugsNGKZKR7A-10
Fuel Unleaded petrol 95 RON (EN228 standard) Methane
168
TECHNICAL DATA

WEIGHTS AND
LOADS
To identify the weights and loads for
this vehicle, refer to the plate shown in
fig. 190 or (for versions/markets, where
provided) in fig. 191 and described in
the “Vehicle summary identification and
paintwork plate” chapter, or refer to
the vehicle registration certificate
showing the type-approved weights (for
markets, where provided).
DMaximum permitted weight of fully
laden vehicle (GVW).
EMaximum permitted weight of the
vehicle (GVW) fully laden plus trailer. If
there is no value in the field or if
there is a dash, it means that the
vehicle cannot tow.
FMaximum permitted weight on first
axle (front).
GMaximum permitted weight on
second axle (rear).
To calculate the towable weight with a
braked trailer, take the difference
between values E and D shown on the
plate.
E.g.: E= 6000 kg - D= 3500 kg
Braked trailer=2500 kg
IMPORTANTDo not exceed the
indicated trailer and towable weights.
IMPORTANTRespect the vehicle
towing capacities.
The tables show the towable weight for
engine version.
(For versions/markets, where provided)
EMaximum permitted weight of fully
laden vehicle (GVW)
FMaximum permitted weight of the
vehicle (GVW) fully laden plus trailer. If
there is no value in the field or if
there is a dash, it means that the
vehicle cannot tow
GMaximum permitted weight on first
front axle
HMaximum permitted weight on
second rear axle
To calculate the towable weight with a
braked trailer, take the difference
between values F and E shown on the
plate.
E.g.: F= 6000 kg - E= 3500 kg
Braked trailer=2500 kg
IMPORTANT Do not exceed the
indicated trailer and towable weights.
IMPORTANT Respect the vehicle
towing capacities. The tables show the
towable weight for engine version.
XXXXXX
XXXVERSIONE-VERSION
N° PER RICAMBI
N° FOR SPARES
MADE IN TURKEY
XXXXxxx
MOTORE-ENGINECODICE COLORE/PAINT
2 - 1 -
Kg
Kg
Kg
Kg
XXXX XXXX XXXX
190F0V0726
191F0T0245
176
TECHNICAL DATA

TOWABLE WEIGHTS (kg)
Key:
A= TOWABLE WEIGHT
B= UNBRAKED TRAILER
C= LOAD ON TOW HOOK
D= LOAD ON ROOF
VERSION GVW ENGINE A B C D
1680 1.4 Natural Power — — — 100
CARGO1680 1.4 Euro 6 600 400 60 100
15001.4 Euro 6 600 400 60 100
1.3 Multijet 80 HP Euro 6 1000 400 60 100
1.3 MultiJet 95 HP Euro 6 1000 400 60 100
17001.4 Euro 6 600 400 60 100
1.3 Multijet 80 HP Euro 6 1000 400 60 100
1.3 MultiJet 95 HP Euro 6 1000 400 60 100
17501.3 Multijet 80 HP Euro 6 1000 400 60 100
1.3 MultiJet 95 HP Euro 6 1000 400 60 100
COMBI N11735 1.4 Euro 6 600 400 60 100
17551.3 Multijet 80 HP Euro 6 1000 400 60 100
1.3 MultiJet 95 HP Euro 6 1000 400 60 100
COMBI M11680 1.4 Euro 6 600 400 60 100
17001.3 Multijet 80 HP Euro 6 1000 400 60 100
1.3 MultiJet 95 HP Euro 6 1000 400 60 100
1750 1.4 Natural Power — — — 100
N1= goods carrier
M1= people carrier
177

NOTE For vehicles with tow hook: the vertical static load on the tow hook must be within the maximum permitted weight
declared for the vehicle.
REFUELLING
1.4 Euro 6 1.4 Natural Power
Recommended fuels and
original lubricants
litres kg litres kg
Fuel tank: 45 - 45 -Unleaded petrol with R.O.N. no
lower than 95 (EN228
specifications) including a reserve of: 6/7 - 6/7 -
Methane cylinder capacity
(#) (^):---13
(approximate)Methane
Engine cooling system: 6.64 - 6.6 -Mixture of distilled water and
PARAFLU
UPliquid at 50%(*)
Engine sump: - 2.1 2.4 -SELENIA K P.E.(1.4 Euro 6
version) /SELENIA
MULTIPOWER GAS 5W-40
(1.4 Natural Power version) Engine sump and filter: - 2.25 2.6 -
Gearbox casing/differential: - 1.5 - 1.5TUTELA TRANSMISSION
TECHNYX
Hydraulic power steering: 0.38 0.35 0.38 0.35TUTELA TRANSMISSION
GI/E
Hydraulic brake circuit: - 0.50 - 0.5TUTELA TOP 4orTUTELA
TOP 4/S
Windscreen and rear window washer
fluid reservoir:3.0 - 3.0 -Mixture of water and liquid
PETRONAS DURANCE SC 35
(#) The amount of methane depends on the outside temperature, the supply pressure, the quality of the gas and the type of refuelling system.
(^) Total cylinder volume about 77 litres.
(*)When the vehicle is used in particularly harsh weather conditions, we recommend using a 60-40 mixture of PARAFLU
UPand demineralised water.
178
TECHNICAL DATA

1.3 Multijet 80 HP Euro 6 - 1.3 Multijet 95 HP Euro 6
Recommended fuels and
original lubricants
litres kg
Fuel tank: 45 -
Diesel for motor vehicles
(EN590 Specification)
including a reserve of: 6/7 -
Engine cooling system: 7.6 -Mixture of distilled water and
PARAFLU
UPliquid at 50%(*)
Engine sump without UREA: 3.7 3.13
SELENIA WR FORWARD
Engine sump and filter without UREA: 3.9 3.30
Engine sump with UREA: 3.7 3.13
SELENIA ECO2
Engine sump and filter with UREA: 3.9 3.30
Gearbox casing/differential: 1.84 1.6TUTELA TRANSMISSION
TECHNYX
COMFORT-MATIC transmission
actuation hydraulic system (1.3 Multijet
80 HP Euro 6 versions):0.6 0.5TUTELA CAR CS SPEED
Hydraulic power steering: 0.38 0.35TUTELA TRANSMISSION
GI/E
Hydraulic brake circuit: - 0.5TUTELA TOP 4orTUTELA
TOP 4/S
Windscreen and rear window washer
fluid reservoir:3.0 -Mixture of water and liquid
PETRONAS DURANCE SC
35
UREA tank (for versions/markets, where
provided) approximate capacity:12 -
AdBlue®(water-UREA solu-
tion) DIN 70 070 and ISO
22241-1
159) 160)
(*)When the vehicle is used in particularly harsh weather conditions, we recommend using a 60-40 mixture of PARAFLUUPand demineralised water.
180
TECHNICAL DATA