2019 DODGE DURANGO wheel

[x] Cancel search: wheel

Page 129 of 270

DODGE DURANGO 2019  Vehicle Warranty •EXPLOSION OF TIRE/RIM ASSEMBLY DUE TO IMPROPER
MOUNTING. Only specially trained persons should mount tires.
• FAILURE TO MOUNT RADIAL TIRES ON APPROVED RIMS.
• FAILURE TO DEFLATE SINGLE OR DUAL

Page 131 of 270

DODGE DURANGO 2019  Vehicle Warranty is important for proper tire load distribution and function. The maximum
load capacity stamped on the sidewalls of P-Metric & European Metric
tires is reduced by 10% when used on a light truck, utilit

Page 132 of 270

DODGE DURANGO 2019  Vehicle Warranty Tire Pressure Monitoring System Alert
Refer to your vehicle Owner ’s Manual for more information on what to
do if the tire pressure warning system activates.
THE CONVENIENCE (TEMPORARY) SPARE
The Co

Page 134 of 270

DODGE DURANGO 2019  Vehicle Warranty NOTE:Goodyear manufactured and/or marketed European- Metric
passenger tires and P-Metric passenger tires are interchangeable as long
as they have the same section width, same aspect ratio, same rim
di

Page 137 of 270

DODGE DURANGO 2019  Vehicle Warranty TO PROLONG TIRE LIFE DURING A SYSTEM ALERT
The Goodyear or Dunlop Run-Flat tire can be driven at low or zero air
pressure (refer to your vehicle Owner ’s Manual for these limitations). To
help prolo

Page 138 of 270

DODGE DURANGO 2019  Vehicle Warranty WARNING!
Goodyear and Dunlop Run-Flat tires are designed for use only on
certain original equipment wheels supplied with a properly
operating low tire pressure-monitoring system. If applied to a
vehic

Page 141 of 270

DODGE DURANGO 2019  Vehicle Warranty 2. If Hankook Temporary Tire fails as a result of defect in materialsand/or workmanship during the first 50% of usable treadwear, the tire
will be replaced with a new, comparable tire at no charge inc

Page 143 of 270

DODGE DURANGO 2019  Vehicle Warranty and beads. Do not exceed the maximum recommended pressure to
seat beads on rim. Use remote control inflation equipment and
inflation cage.
NOTE:
• Never inflate over 40 psi to seat beads.
• Mount