2019 AUDI E-TRON reset

High-voltage system


— Only transport the charging equipment in
the front storage compartment and never
unsecured or in the passenger compart-
ment.

C@) Note
Always lift or carry the Audi charging system
as one unit and never by the cables.
Audi e-tron compact charging system
Applies to: vehicles with Audi e-tron compact charging system

o~ |


[RAZ-0605|


Fig. 92 Audi e-tron compact charging system: components
(example)
You can use the Audi e-tron compact charging
system to charge at a household or industrial
socket. Depending on the country and the vehicle
equipment, the following accessories may be
available:
@ Control unit
@ Vehicle cable with vehicle charging connector
@® Power cable with power plug for household
sockets
@ Power cable with power plug for industrial
sockets
The vehicle cable is securely connected to the
control unit. The power cable is plugged into the
upper end of the control unit and can be switched
=>page 118.
Control unit overview

® On/Off button, charging power level,
and LED

© _ |Status LED:

a Power supply/household
connection

Vehicle



Sa
0 Control panel
a Reset

114
Fig. 93 Audi e-tron compact charging system: control unit
Adjusting the charging power level
The control unit automatically recognizes the
voltage and the available current strength. You
can set whether you would like to charge with the
full or half of the charging power. With the
charging power level, you can reduce the risk of
the electrical installation becoming overheated.
—To set the charging power level, press the but-
ton©) & fig. 93.
— The charging power display appears. The set
value is displayed.

4KE012721BB
High-voltage system


Indicator lights Meaning Solution



() Lights up red The control unit has atechni- | Disconnect the charger from the power
o Q Off cal malfunction (self-test supply and reconnect it after 60 seconds.
oO B of failed). The charging process _ | If the malfunction continues, have the
© 0) Flashing red has been interrupted. control unit checked by an authorized Au-
di dealer or authorized Audi Service Facili-
a Off ty.
C) Lights up red The charging infrastructure of | Have the control unit checked by an au-
@ © Lights up red the power supply/household | thorized Audi dealer or authorized Audi
© ®& Lights up red connection is insufficient: the | Service Facility, and have the power sup-
ground conductor is interrupt- | ply/household connection checked by a
Oo 0 Off ed or not present. The ground | qualified electrician.
“al Off conductor monitor has inter-
rupted the charging process.
() Lights up red The indicator light in the reset | Have the control unit replaced by an au-
@ © Lights up red button on the control unit is | thorized Audi dealer or authorized Audi
© B Lights up red faulty. The charging process _| Service Facility.
. has been interrupted.
e@ J Lights up red
1 Off
() Lights up red The control unit has detected | Press and hold the *— button for at least
© © Lights up red residual current. The charging |two seconds. If the malfunction contin-
© & Lights up red process has been interrupted. | ues, have the control unit checked by an
© 0 Lights up red authorized Audi dealer or authorized Audi
Service Facility, and have the power sup-
“a Flashing red ply/household connection checked by a
qualified electrician.
c) Lights up red The charging infrastructure is | Disconnect the charger from the power
©
Q Flashing red wired incorrectly. The charging | supply. Have the power supply/household
© & Flashing red process has been interrupted. | connection checked by a qualified electri-
© ( Flashing red Sil
“a Off
() Lights up red The control unit has atechni- | Disconnect the charger from the power
@ © Lights up red cal malfunction. Possible supply and reconnect it after 60 seconds.
© B Lights up red cause of the malfunction: If the malfunction continues, have the
MD Lightsup red software error or the load re-__| control unit checked by an authorized Au-
lay has been switched incor- | di dealer or authorized Audi Service Facili-
| Lights up red rectly. The charging process __| ty, and have the power supply/household
has been interrupted. connection checked by a qualified electri-
cian.
() Flashing red The control unit has a serious | Have the control unit replaced by an au-
Oo QO Off malfunction. The charging thorized Audi dealer or authorized Audi
oO B of process has been interrupted. | Service Facility.
e (Lights up red
+ Off

117

Driver assistance

The display @ only appears when the Driver as-
sistance display is open in the on-board
computer > page 14.

ZA WARNING
Follow the safety precautions and note the
limits of the assist systems, sensors, and
cameras > page 123.
Adjusting the adaptive cruise assist
Applies to: vehicles with adaptive cruise assist

You can adjust the adaptive cruise assist to your
own preferences. The settings depend on the ve-
hicle equipment.
> Applies to: MMI: Select on the home screen:
VEHICLE > Driver assistance > (<3) > Adaptive
cruise assist.
Possible settings:
Lane guidance - If lane guidance is also active
when adaptive cruise assist control is active, you
can switch it on or off.
Driving program - Depending on the driving pro-
gram and the distance that are set, the vehicle
handling will be adjusted from Sport to Moder-
ate and the lane guidance haptic feedback will be
adjusted.
Store last distance - The last distance that was
set will be stored after the ignition is switched
off. If the distance is not stored, distance
(time distance of approximately 1.8 seconds) is
automatically preset every time the ignition is
switched on.
Applies to: vehicles with efficiency assist
Predictive control - When predictive control is
switched on, the system reacts automatically to
situations > page 137.
G) Tips
— In the efficiency* Audi drive select mode,
vehicle handling and the adaptive cruise as-
sist haptic feedback are also affected. The
Driving program can no longer be adjusted.
— Specific settings are stored automatically in
the active personal profile.
146
Messages
Applies to: vehicles with adaptive cruise assist
a | or is displayed when there is a malfunc-
tion, the adaptive cruise assist functions may be
unavailable or limited.
A message that indicates the cause and possible
solution may appear with some displays. The
weather conditions may be too poor or a sensor
may be covered. Clean the area in front of the
sensors > page 124, fig. 97 and try to turn on
the systems again later.
If the malfunction remains, drive to an author-
ized Audi dealer or authorized Audi Service Facili-
ty immediately to have the malfunction correct-
ed.
Applies to: vehicles with narrowed road assist
Narrow area
Depending on vehicle equipment, this message
appears in the Driver assistance display if the
adaptive cruise assist is adjusting the speed ina
narrow area, for example a construction zone.
ae Please take over steering and pay atten-
tion to traffic!
Be Please take over!
This message appears if steering activity is no
longer detected. Always keep your hands on the
steering wheel so you can be ready to steer at any
time.
Adaptive cruise assist: Please take over!
This message appears if the vehicle rolls back
when starting on a slight incline, even though the
systems are active. Press the brake pedal to pre-
vent the vehicle from rolling or starting to move.
Depending on the equipment, this message may
also appear if the driver does not take over steer-
ing after multiple requests for the driver to take
action. The adaptive cruise assist is switched off.
Applies to: vehicles with laser scanner
3] Adaptive cruise assist: limited availability.
See owner's manual
This message appears when the sensor view is
limited, for example, when weather conditions >

4KE012721BB
Telephone

— Ringtone”: available ringtones are played using
the Ringtone function. Press on an entry in the
list.
— Microphone input level: you can adjust the mi-
crophone input level using the slider.
Turn on car phone or data module
Applies to: vehicles with car phone/data module
When this function is switched on, you can use
the car phone or data module.
As long as the car phone was not turned off sepa-
rately the last time it was used, it will turn on au-
tomatically when the ignition is switched on.
Edit voicemail number
You can change your voicemail number.
Enable VoLTE
When this function is switched on, Voice over
LTE* will be supported.
Network settings
— Login to mobile phone network: select to log
into your cell phone service provider network
automatically or manually.
— Manual network selection: Requirement: the
data module must be switched on and Login to
mobile phone network must be set to Manual.
Select a network manually from the list of
available networks at the present location.
Car phone serial number (IMEI):
Applies to: vehicles with car phone
The serial number (IMEI) of your car phone is dis-
played.
@ Tips
— Several mobile devices can be paired with
the MMI, but only two* mobile devices can
be actively connected.
—To delete all paired Bluetooth devices, the
Bluetooth function can be reset to the fac-
tory default settings > page 232.
Directory settings
Applies
to: vehicles with telephone
> Applies to: MMI: Select on the home screen:
PHONE > Contacts > <2.
Switching between two mobile devices
Requirement: telephone 1 and telephone 2 must
be connected.
Switch telephones: the device name of your ac-
tive mobile device is displayed. You can switch
the phone by pressing the button.
The directory for the selected phone will be dis-
played.
Hide grayed-out contacts
When this function is switched on, contacts that
have no phone numbers stored for them will be
hidden.
Sort order
You can sort the contacts in alphabetical order by
Last name or First name.
Download contacts
Requirement: a mobile device must be connected
to the MMI.
To update the contacts in the MMI, you can man-
ually download your mobile device contacts. De-
pending on the mobile device, you may need to
disconnect and reconnect the Bluetooth connec-
tion to update the contacts.
Memory capacity
You can manage up to 23,000 contacts. You can
also download up to 5,000 contacts from maxi-
mum four mobile devices. You can also import up
to 3,000 contacts from a storage medium.
Importing and exporting contacts
Requirement: an SD card must be in the SD card
reader* = page 217 or a USB storage device must
be connected to the Audi music interface
=> page 220.
181

4KE012721BB
Audi connect

— Password: your cell phone service provider as-
signs the password for your online profile.
— Apply settings: saves the changed settings.
— Reset configuration: resets the connection set-
tings.
Data usage counter
Your current data usage is displayed.
— Reset counter: you can reset your usage statis-
tics to zero.
— Warning limit: you can set a warning limit for
your data usage (GB/MB).

Always follow the information found in > AV

in General information on page 184.

Always follow the information found in >@® in
General information on page 184.
For more information on roaming charges,
contact your cell phone service provider.
Wi-Fi settings
Applies to: vehicles with Wi-Fi hotspot
Requirement: the ignition must be switched on.
» Applies to: MMI: Select on the home screen:
SETTINGS > Connection settings > Wi-Fi
Depending on the country and the vehicle equip-
ment, the following functions may be available:
Wi-Fi
When the function is switched on, the MMI's Wi-
Fi hotspot is active and Wi-Fi devices can be con-
nected to the hotspot.
Wi-Fi hotspot settings
The Wi-Fi connection between the MMI and your
Wi-Fi device is encrypted. You can change the fol-
lowing information if needed.

D_ Not available in every market.
— Access point (SSID): name of the Wi-Fi hot-
spot.
— Password: a random password was set at the
factory in the MMI. The password can be
changed. The encryption method requires a
password to be at least eight characters long.
Choose a secure password.
— Visible to others: you can switch the visibility
of the Wi-Fi hotspot on or off.

Always follow the information found in > A\
in General information on page 184.

Always follow the information found in >@® in
General information on page 184.
Data plans)
Applies to: vehicles with data plans
Requirement: you must have created a myAudi
account at my.audi.com. Your vehicle must be
registered in your myAudi account.
You can purchase data plans at my.audi.com.

Always follow the information found in > A\
in General information on page 184.

Always follow the information found in >@ in
General information on page 184.
If driving out of the country, applicable data
plans must be purchased.
189

4KE012721BB
Radio

Radio functions

aA
st

RAX-0097
Oo we
eer
eet) Last stations fee nrc
red


| 20 || |
®
Fig. 151 Upper display (example): left side: Radio functions in the playback view, right side: Sources
You can control the central radio functions in the > Applies to: MMI: Opening sources (2): Select on
playback view. the home screen: RADIO > Source.

> Applies to: MMI: Opening the playback view The following table gives an overview of the sym-
@: Select on the home screen: RADIO > aradio _ hols and radio functions.
station.
Symbol/Description Description

Playback view You can control the central radio functions in the playback view.

Sources The available sources are displayed and can be accessed in the radio.

Source button Displays sources in the Radio menu.

Shows the current station frequency band. If a symbol with the


Q/©|
©
j/O|E|O
Frequency band WEB label is displayed, then the station is being streamed from on-
line. Always follow the information found in ©.
Presets Storing a preset: press Y¥. See > page 212.
Settings See > page 215.

© Station logo
Displays the station logo, if available.
Switching between picture views: press the station logo. Use one
finger to swipe to the right or left to switch between the Station
logo and Cover art.
Cover art: the album cover is displayed if available. Always follow
the information found in > ©.

Back Go back one level.

Search See > page 212

©
|©O|©
Last stations
Displays recently played stations from all frequency bands
> page 212.




@ Favorites See > page 212
® SXM station list Displays stations from the SiriusXM frequency band.
® Online* See > page 213

211

Radio


Symbol/Description Description
AM Displays the station list for the AM frequency band.
FM Displays the station list for the FM frequency band.

SiriusXM alerts
Overview of songs, artists, or teams from the stored SiriusXM alerts
being currently received > page 214.


More Access options for the current station > page 215.
KY/PI Select the previous/next station.
yng Unmutes or mutes playback.
List The station list is displayed > page 210.

Info section ®
|O/O/S|O|
©
|O|®
tional data.

Depending on availability, the station name as well as program in-
formation, for example, may be displayed > page 216, Online addi-

C) Note
Read the information about Audi connect, and
be sure to note the connectivity costs section
=@ in General information on page 184.
Gy Tips
— Not all functions are available in every
source and on every touch display.
— Applies to: MMI: To select the previous or
next station, drag your finger to the left or
right in the playback view in the center of
the display.
a i-\x-yaaey-t laa)
Applies to: vehicles with free text search
Using the free text search, you can select the or-
der that the search terms are entered in the input
field. Search in all frequency bands for a station
name, channel number, or program type, such as
News. You can also select the frequency.
> Applies to: MMI: Select on the home screen:
RADIO > Source > Search.
Selecting a frequency: enter a frequency. Press
on a frequency in the results list.
The following information may be available:

Symbol
Oo
4
212
Description

Results from the list: Last stations

Results from the list: Presets




Symbol Description
5) Results from a Station list
|
For exam- | Station frequency band
ple, [™]

Last stations
Applies to: vehicles with last stations
You can listen to the last stations that were
played in all frequency bands.
> Applies to: MMI: Select on the home screen:
RADIO > Source > Last stations.
— Listening to previously played stations: press
a station.
— Deleting last stations: select: Z > select one
or more stations or Select all > Delete >
(Done).
Applies to: vehicles with favorites
You can store your favorite stations from every
frequency band in the presets list.
Setting presets using the MMI
> Applies to: MMI: To play a preset, select on the
home screen: RADIO > Source > Presets > a
preset.
> To store a preset, press W © > page 211,
fig. 151, or press Store as preset in the options
= page 215.

4KE012721BB
Radio

Requirement: the presets list must be displayed.
At least one preset must be stored.
> To delete a preset, select: Z > select one or
more stations or Select all > Delete > (Done).
Requirement: the presets list must be displayed.
At least two presets must be stored.
> To move a preset, press Z. Touch the $ symbol
and move the entry to the desired position.
Press Done.
Smart favorites
SiriusXM channels are stored in the presets as
smart favorites with the s% symbol. After switch-
ing the ignition and the MMI on, the smart favor-
ites store radio programs at a specific time. Press
ona smart favorite. You have the following op-
tions:
— Pause/Start: press I/D.
— Selecting the previous or next track: press !I<
or >i.
— Going to the beginning of a recording or live
program: press and hold !I< or >i.
— Setting the playback point: you can adjust the
playback position using the knob.
— Going to a live program: press [vé).
Applies to: vehicles with Audi connect Infotainment and on-
line radio
You can listen to various radio stations or pod-
casts on the Internet using online radio.
Requirement: the MMI must be connected to the
Internet > page 184, Audi connect.
> Applies to: MMI: Select on the home screen:
RADIO > Source > Online.
The following functions are available in the on-
line radio menu:
— Search: you only can search for online radio sta-
tions in this search. You can search for station
names and categories.
— Last played station: the station that was
played last will start playing.
— Top stations: select a station from the list of
popular online radio stations.
— Filtering the list: Select: © > (select a catego-
ry) > select a station name. The following cate-
gories are available:
— Countries
— Genres
— Languages
Other categories may be available depending on
the country and vehicle equipment.
Podcasts
— Applies to: MMI: Select on the home screen:
RADIO > Source > Online > Podcasts.
The following functions are available:
— Listening to a podcast: select: a podcast > a
podcast episode.
— Search: press 2.
The following functions are available in the pod-
cast playback view:
— Displaying the podcast episodes: press List.
— Starting or stopping the podcast: press P orl.
— Previous or next podcast: press K/D|, or use one
finger to drag the center of the display to the
left or right.
— Changing the playback point: you can adjust
the playback position using the knob.
— Displaying the online radio menu: press 5a.
— Switching to radio: press Source. The sources
in the Radio menu are displayed.
Podcast favorites
You can store podcasts in the Podcast favorites.
Storing a podcast favorite: requirement: the
podcast playback view must be displayed. Press
YX, or press Save podcast in the options
=> page 215, Options.
Requirement: at least one entry must be stored
in the Podcast favorites.
— Listening to a podcast favorite: press on the
desired podcast.
— Browsing podcast favorites: use your finger to
swipe to the Left or right.
— Displaying all podcast favorites: press All.
— Deleting a favorite: Select: All > Z > select one
or more podcasts or Select all > Delete >
(Done).
213