2019.5 OPEL INSIGNIA BREAK Manual user

Page 81 of 323

OPEL INSIGNIA BREAK 2019.5  Manual user Storage79Lift cover at the rear.
Remove the cover.
Fitting cover
Engage cover in side guides and fold
downwards. Attach the retaining
straps to the tailgate.
Sports Tourer, Country Tourer
Closing roll

Page 82 of 323

OPEL INSIGNIA BREAK 2019.5  Manual user 80StorageRear floor storage coverGrand Sport
The rear floor cover can be removed.
Raise cover at the loop and remove.
Sports Tourer, Country Tourer
The rear floor cover can be folded up.
Pull the hand

Page 83 of 323

OPEL INSIGNIA BREAK 2019.5  Manual user Storage81Mounting carriages in the rail
Insert carriages into the rails at the
load compartment floor. Thereby use
the recess in the rail and press the
button on the carriage while inserting
it.
Using

Page 84 of 323

OPEL INSIGNIA BREAK 2019.5  Manual user 82Storage
● Pull holding rod out of cassette.Suspend and engage holding rod
into an installation opening on
one side of the roof frame.
Compress rod and suspend and engage at the other side.
Remove

Page 85 of 323

OPEL INSIGNIA BREAK 2019.5  Manual user Storage83RemovalBehind the rear seats ● Remove and compress one side of holding rod from installation
opening. Remove other side of
holding rod from installation
opening.
● Roll up safety net.
●

Page 86 of 323

OPEL INSIGNIA BREAK 2019.5  Manual user 84StorageSports Tourer, Country Tourer
Stow the warning triangle on the
tailgate inner panelling and secure it with the straps.
First aid kit
Grand Sport
Stow the first aid kit on the right side
of th

Page 87 of 323

OPEL INSIGNIA BREAK 2019.5  Manual user Storage85Roof rack system
Roof rack For safety reasons and to avoiddamage to the roof, the vehicle
approved roof rack system is
recommended. For further
information, contact your workshop.
Mounting ro

Page 88 of 323

OPEL INSIGNIA BREAK 2019.5  Manual user 86Storage● Do not allow the load to protrudeabove the upper edge of the
backrests.
● Do not place any objects on the load compartment cover or theinstrument panel, and do notcover the sensor on to