Page 369 of 686

DRIVER SUPPORT
}}
367
Activating/deactivating Lane
Keeping Aid
The Lane Keeping Aid (LKA
111
) function can be
switched On or Off.
On/OffPress the Lane Keeping Aid
button in the center display's
Function view. •
GREEN button indicator light - LKA is acti-
vated.
• GRAY button indicator light - LKA is deacti-
vated.
Related information
•Lane Keeping Aid (p. 364) Selecting type of assistance for
Lane Keeping Aid
The driver can determine what types of assis-
tance LKA 112
should provide if the vehicle veers
from its lane.
1. Select
Settings My Car IntelliSafe in
the center display's Top view.
2. Under Lane Keeping Aid Mode, select
what assistance LKA should provide:
• Assist the driver will receive steering
assistance but no warning.
• Both - the driver will receive both steering
assistance and a warning.
• Warning - the driver will only receive a
warning.
Related information
• Lane Keeping Aid (p. 364) Lane Keeping Aid limitations
In certain demanding driving conditions, Lane
Keeping Aid may not be able to properly assist
the driver. In these situations, it is recommended
that the function be deactivated. Examples of such situations include:
• road work
• winter driving conditions
• poor road surfaces
• a very sporty driving style
• bad weather with reduced visibility
• roads with indistinct or no lane markings
• sharp edges or lines other than the lane's
side markings
• when the power steering works at reduced
power - e.g. during cooling due to overheat-
ing (see section "Speed-dependent steering
force").
NOTE The function uses the vehicle's camera unit,
which has some general limitations – see the
section "Camera unit limitations".
111
Lane Keeping Aid
112 Lane Keeping Aid
Page 370 of 686
||DRIVER SUPPORT
368
Related information
•
Lane Keeping Aid (p. 364)
• Speed-dependent steering wheel resistance
(p. 272)
Page 371 of 686
DRIVER SUPPORT
}}
369
Lane Keeping Aid symbols and
messages
A number of symbols and messages related to
Lane Keeping Aid LKA 113
may be displayed in
the instrument panel. Some examples of symbols and messages are shown in the table below. Symbol
Message MeaningDriver support system
Reduced functionality Service required
The system is not functioning as intended. Contact a workshop ‒ an authorized Volvo work-
shop is recommended. Windscreen sensor
Sensor blocked, see Owner's manual
The camera's ability to detect the lane in front of the vehicle is re\
duced.Lane Keeping Aid
Apply steering
LKA's steering assistance is disabled when the driver's hands are \
not on the wheel. Follow
the instructions and steer the vehicle.Lane Keeping Aid
Standby until steering applied
LKA will go into standby mode until the driver begins steering the vehic\
le again.113
Lane Keeping Aid
Page 372 of 686
||DRIVER SUPPORT
370
A text message can be erased by briefly pressing
the button in the center of the right-side
steering wheel keypad.
If the message persists: Contact a workshop ‒ an
authorized Volvo workshop is recommended.
Related information
• Lane Keeping Aid (p. 364)
Page 373 of 686
DRIVER SUPPORT
371
Lane Keeping Aid symbols in the
instrument panel
Lane Keeping Aid (LKA 114
) uses symbols in the
instrument panel for various situations. Some examples of symbols and
descriptions of the situations in
which they might appear are
provided below.
AvailableAvailable
‒
the marker lines in the symbol are WHITE.
Lane Keeping Aid is able to detect one or both of
the traffic lane's side marker lines.
Unavailable Unavailable ‒ the marker lines in the symbol are GRAY.
Lane Keeping Aid is unable to detect the lane
marker lines, the vehicle's speed is too low or the
road is too narrow.
Steering/warning indicator Steering/warning ‒ the marker lines in the symbol are
COLORED.
Indicates that the Lane Keeping Aid system is
alerting the driver and/or attempting to steer the
vehicle back into the lane.
Related information
• Lane Keeping Aid (p. 364) 114
Lane Keeping Aid
Page 374 of 686

DRIVER SUPPORT
* Option/accessory.
372 Steering assistance at risk of
collision
The Collision avoidance assistance function
is intended to help the driver reduce the risk of
the vehicle inadvertently veering from the traffic
lane and/or colliding with another vehicle or
obstacle by actively steering the vehicle back
into the lane and/or swerving out of the way.
Collision avoidance assistance consists of
three sub-functions:
• Run-Off Mitigation with steering assistance
• Steering assistance during collision risks
from oncoming traffic
• Steering assistance during collision risks
from behind*
After the system has automatically intervened,
this text message will appear in the instrument
panel:
• Collision avoidance assistance –
Automatic intervention
NOTE It is always the driver who must decide how
much the vehicle should be in control – the
vehicle can never take command.
Related information
•
Activating/deactivating steering assistance
during collision risks (p. 372)
• Symbols and messages for steering assis-
tance during collision risks (p. 380)
• Run-Off Mitigation with steering assistance
(p. 373)
• Run-Off Mitigation with steering assistance
levels (p. 373)
• Activating/deactivating Run-Off Mitigation
with steering assistance (p. 374)
• Limitations of Run-Off Mitigation with steer-
ing assistance (p. 374)
• Steering assistance during collision risks
from oncoming traffic (p. 375)
• Activating/deactivating Steering assistance
during collision risks with oncoming vehicles
(p. 376)
• Limitations of steering assistance during col-
lision risks from oncoming traffic (p. 376)
• Steering assistance during collision risks
from behind* (p. 377)
• Activating/deactivating Steering assistance
during collision risks from behind* (p. 378)
• Limitations of steering assistance during col-
lision risks from behind (p. 378) Activating/deactivating steering
assistance during collision risks
The driver can choose to have this function On
or Off.
To switch off the function:
1.
Select Settings My Car IntelliSafe
in
the center display's Top view.
2. Deselect Collision avoidance assistance.
>
The function will be deactivated.
NOTE When the
Collision avoidance assistance
function is deactivated, all subfunctions of the
following are deactivated:
• Steering assistance at risk of run-off
• Steering assistance at risk of head-on
collision
• Steering assistance during collision risks
from behind*
Although it is possible to deactivate the func-
tion, the driver is advised to keep it activated
since it can help improve driving safety in
most cases.
Related information
• Steering assistance at risk of collision
(p. 372)
Page 375 of 686

DRIVER SUPPORT
}}
373
Run-Off Mitigation with steering
assistance
This sub-function is intended to help reduce the
risk of the vehicle inadvertently running off the
road by actively steering the vehicle back onto
the road.
The function is active at speeds between
65-140 km/h (40-87 mph) on roads with clearly
visible traffic lane markings/lines.
The system uses a camera to monitor the edges
of the road and the painted side marker lines. If
the vehicle is about to cross the edge of the road,
the function will attempt to steer the vehicle back
onto the road. If this is not sufficient to keep the
vehicle on the road, the brakes will also be
applied.
However, the function will not provide either
steering assistance or braking if the turn signal is
used. The function will also not be activated if it
detects that the driver is actively operating the
vehicle.
After the system has automatically intervened,
this text message will appear in the instrument
panel: • Collision avoidance assistance –
Automatic intervention
WARNING •
The "Steering assistance at risk of run-
off" subfunction is supplementary driver
support intended to help improve driving
safety – it cannot handle all situations in
all traffic, weather and road conditions.
• The function cannot detect barriers, rails
or similar obstacles at the side of the
road.
• "Steering assistance at risk of run-off" is
not a substitute for the driver's attention
and judgment. The driver is always
responsible for ensuring the vehicle is
driven in a safe manner, at the appropri-
ate speed, with an appropriate distance to
other vehicles, and in accordance with
current traffic rules and regulations.
Related information
•Steering assistance at risk of collision
(p. 372) Run-Off Mitigation with steering
assistance levels
This function has two activation levels for inter-
vention:
•
Steering assistance only
• Steering assistance with braking
Steering assistance only Intervention with steering assistance.
Page 376 of 686

||DRIVER SUPPORT
* Option/accessory.
374
Steering assistance with braking Intervention with steering assistance and braking.
Braking intervention assists in situations where
steering assistance alone is not sufficient. Brak-
ing force is automatically adapted according to
the situation at the moment the vehicle begins to
run off the road.
Related information
• Steering assistance at risk of collision
(p. 372) Activating/deactivating Run-Off
Mitigation with steering assistance
The driver can choose to have this function On
or Off.
To switch off the function:
1.
Select Settings My Car IntelliSafe
in
the center display's Top view.
2. Deselect Collision avoidance assistance.
>
The function will be deactivated.
NOTE When the
Collision avoidance assistance
function is deactivated, all subfunctions of the
following are deactivated:
• Steering assistance at risk of run-off
• Steering assistance at risk of head-on
collision
• Steering assistance during collision risks
from behind*
Although it is possible to deactivate the func-
tion, the driver is advised to keep it activated
since it can help improve driving safety in
most cases.
Related information
• Steering assistance at risk of collision
(p. 372) Limitations of Run-Off Mitigation
with steering assistance
In certain demanding driving conditions, the
function may not be able to properly assist the
driver. In these situations, it is recommended
that it is turned off.
Examples of such situations include:
• road work
• winter driving conditions
• narrow roads
• poor road surfaces
• a very sporty driving style
• bad weather with reduced visibility
• roads with indistinct or no lane markings
• sharp edges or lines other than the lane's
side markings
• when the power steering works at reduced
power - e.g. during cooling due to overheat-
ing (see section "Speed-dependent steering
force").
NOTE The function uses the vehicle's camera unit,
which has some general limitations – see the
section "Camera unit limitations".