2018 TOYOTA SIENNA run flat

201-2. Operating the AUTO ACCESS SEAT
SIENNA_AAS_OM08023U_(U)
Before operating the AUTO ACCESS SEAT
Park the vehicle on a flat surface and leave the engine running.
Shift the shift lever to P and set
the parking brake.
Check that there are no people or items of luggage around the
AUTO ACCESS SEAT, and that there are no people around the
vehicle.
Open the right-hand sliding door fully.
The AUTO ACCESS SEAT (right-hand second seat) can be
rotated, raised and lowered electrically to help the seat occupant
easily enter and exit the vehicle.
Have all operations carried out by an assistant.
1
2
3
4

261-2. Operating the AUTO ACCESS SEAT
SIENNA_AAS_OM08023U_(U)
Moving the AUTO ACCESS SEAT outside
the vehicle
Park the vehicle on a flat surfac e and leave the engine running.
Shift the shift lever to P and set the parking brake.
Confirm the following: • The occupant is sitting correctly in the AUTO ACCESS SEAT. (→ P. 14)
• The seat belt is not caught up in the AUTO ACCESS SEAT.
• The occupant of the right-hand third seat is safe.
• The condition of the AUTO ACCESS SEAT ( →P. 2 0 )
Open the right-hand sliding door fully.
Fold the front pas senger seatback. ( →P. 2 1 )
Remove the wireless remote
control from the AUTO
ACCESS SEAT.
Press and hold the seat lower
switch on the wireless remote
control to rotate and lower the
AUTO ACCESS SEAT.
Operation can also be carried out
by the seat raise/lower switch.
( →P. 34)
1
2
3
4
5
6
7

301-2. Operating the AUTO ACCESS SEAT
SIENNA_AAS_OM08023U_(U)
Returning the AUTO ACCESS SEAT to the
vehicle
Park the vehicle on a flat surface and leave the engine running.
Shift the shift lever to P and set the parking brake.
Confirm the following: • The right-hand sliding door is fully open.
• The occupant is sitting correctly in the AUTO ACCESS SEAT. (→ P. 14)
• The occupant of the right-hand third seat is safe.
• The condition of the AUTO ACCESS SEAT ( →P. 2 0 )
Fold the front pas senger seatback. ( →P. 2 1 )
Remove the wireless remote control from the AUTO ACCESS
SEAT. ( →P. 26)
Press and hold the seat raise
switch on the wireless remote
control to rotate and raise the
AUTO ACCESS SEAT.
Operation can also be carried out
by pressing the seat raise/lower
switch. ( →P. 34)
1
2
3
4
5
6

341-2. Operating the AUTO ACCESS SEAT
SIENNA_AAS_OM08023U_(U)
Operating with the seat raise/lower switch
Park the vehicle on a flat surface and leave the engine running.
Shift the shift lever to P and set the parking brake.
Open the right-hand sliding door fully.
Fold the front pas senger seatback. ( →P. 2 1 )
Press and hold the seat raise/
lower switch. Raise
Lower
The beep will sound once, and
the AUTO ACCESS SEAT will
operate.
The AUTO ACCESS SEAT will
operate while the switch is being
pressed. If the switch is
released, the seat will stop in
that position.
When the AUTO ACCESS SEAT st ops automatically, release the
switch.
When returning the AUTO ACCESS SEAT to the vehicle, release the
switch after the seat has stopped automatically and the beep has sounded
once.
If the battery of the wireless remote control has discharged or
another malfunction has occurred, the seat raise/lower switch
can be used to operate the AUTO ACCESS SEAT. (The AUTO
ACCESS SEAT will operate in the same way as when operated
using the wireless remote control).
1
2
3
4
5
1
2
6