2018 TOYOTA HIGHLANDER child lock

1
INDEX
1 Visit your Toyota dealer for information on customizing this feature.2 Programmable by customer. Refer to the Owner’s Manual for instructio\
ns and more information.3 HomeLink® is a registered trademark of Gentex Corporation.
HIGHLANDER 2018
This Quick Reference Guide is a summary of basic vehicle
operations. It contains brief descriptions of fundamental
operations so you can locate and use the vehicle’s main
equipment quickly and easily.
The Quick Reference Guide is not intended as a substitute for
the Owner’s Manual located in your vehicle’s glove box. We
strongly encourage you to review the Owner’s Manual and
supplementary manuals so you will have a better understanding
of your vehicle’s capabilities and limitations.
Your dealership and the entire staff of Toyota Motor North
America, Inc. wish you many years of satisfied driving in your
new Highlander.
A word about safe vehicle operations
This Quick Reference Guide is not a full description of Highlander operations.
Every Highlander owner should review the Owner’s Manual that accompanies
this vehicle.
Pay special attention to the boxed information highlighted in color throughout
the Owner’s Manual. Each box contains safe operating instructions to \
help you
avoid injury or equipment malfunction.
All information in this Quick Reference Guide is current at the time of \
printing.
Toyota reserves the right to make changes at any time without notice.
Engine maintenance 9
Fuel tank door release & cap
8
Hood release


8
Indicator symbols


4-5
Instrument cluster


4
Instrument panel


2-3
Instrument panel light control


8

Keyless entry
1,2 6-7
Smart Key system1,2 7
OVERVIEW
FEATURES & OPERATIONS FEATURES & OPERATIONS (continued)
SAFETY & EMERGENCY FEATURES TOYOTA SAFETY SENSE™ P (TSS-P)
Air conditioning1,2/heating 24-25
All-wheel drive lock switch
27
Audio


23
Auto lock/unlock1 10
Automatic transmission
10
Clock

10
Door locks
1,2 11
Downhill Assist Control system (DAC)
2
7
Driver Easy Speak

22
Garage door opener (HomeLink®)3 11
Lights1,2 & turn signals1 18
Moonroof1 12
Multi-Information Display (MID)2 19
Panoramic moonroof

12
Parking brake


11
Power Liftgate (back door)1,2 13
Power outlets-

12V DC/120V AC/USB 2.1A 17
Rear seat entertainment system
22
Seat adjustments-Front


14
Seat adjustments-Rear


15
Seat heaters/ventilators


26
Seats-Head restraints


15
Seats-Stowing &


returning 3rd row seats

15
Snow mode button


27
Steering lock release


11
Steering wheel switches &


telephone controls (Bluetooth
®) 20 Stop & Start Engine System
21
Tilt & telescopic steering wheel

14
USB 2.0/AUX port

22
Vehicle Stability Control (VSC)/

TRAC OFF switch
26
Windows-Power1 19
Windshield wipers & washers1 16
Automatic High Beams (AHB)

37-38
Dynamic Radar


Cruise Control (DRCC)

34-37
Lane Departure Alert with Steering
Assist function (LDA w/SA)


31-34
Pre-Collision System with Pedestrian
Detection function (PCS w/PD)


29-31
Quick overview-


Toyota Safety Sense™ P (TSS-P)

28
Sensors

28
BLUETOOTH® DEVICE
PAIRING SECTION 44-53
Floor mat installation

43
Rear door child safety locks


40

Seat belt reminder indicator

39
Seat belts


39
Seat belts-3rd row center


39
Seat belts-Shoulder belt anchor


39
Spare tire & tools


41
Star Safety SystemTM 42-43
Tire Pressure Monitoring
(warning) System (TPMS)

40
THIS PAGE ON COVER DOC
140258_HighlanderQRG_GUTS.indd 19/18/17 2:19 PM
OVERVIEW
FEATURES & OPERATIONS
TOYOTA SAFETY SENSE
SAFETY & EMERGENCY FEATURES

40
SAFETY AND EMERGENCY FEATURES
Unlock
Lock
Rear door child safey locks
Tire Pressure Monitoring (warning) System (TPMS)
Moving the lever to the lock position will allow the door to be opened only from the
outside.
Rear door
System reset initialization
1. Push and hold “
SET” button
until the indicator blinks three times.
2. Wait a few minutes to allow
initialization to complete.
After adjusting tire pressures, or after tires have been rotated or replaced, turn the
ignition switch to “ON” and press and hold the
“ SET” button until indicator blinks
three times. Let the vehicle sit for a few minutes to allow initialization to complete.
Refer to the load label on the door jamb or the Owner’s Manual for tire inflation
specifications.
If the tire pressure indicator flashes for more than 60 seconds and then remains on,
take the vehicle to your local Toyota dealer.
NOTE: The warning light may come on due to temperature changes or changes
in tire pressure from natural air leakage. If the system has not been initialized
recently, setting the tire pressures to factory specifications should turn off the
light.