2018 TOYOTA HIGHLANDER Owners Manual (in English)

15
OVERVIEW FEATURES & OPERATIONS TOYOTA SAFETY SENSE SAFETY & EMERGENCY FEATURES
Second row type 1 Second row type 2Third row seat
Refer to the Owner’s Manual for more details.
Pull
(1) Pull(2) Raise
Seat position
(forward/backward)Seat position
(forward/backward)
Seatback angleSeatback angle
adjustment straps
Seatback angle
Height
Lock release button Lock release button Lock release button
FrontSecond rowThird row
HeightHeight
Seat adjustments-Rear
Seats-Head restraints
Seats-Stowing & returning 3rd row seats

16
Single wipe
Interval wipe
Off
Push to Wash and wipe
1 Intermittent windshield wiper
frequency adjustment
Rotate to increase/decrease wipe
frequency.
2 Rain-sensing windshield wipers
Rotate to increase/decrease sensor
sensitivity. (if equipped)Temporary
operation
Rain sensing
(AUTO)
Low
HighAdjust sensitivity2
Pull to wash
and wipe
Interval wipe Mist
Slow
Fast Adjust frequency
1
Pull to wash
and wipe
FEATURES & OPERATIONS
Windshield wipers & washers
FRONT-INTERMITTENT
FRONT-AUTO (RAIN-SENSING) (IF EQUIPPED)
REAR

17
OVERVIEW FEATURES & OPERATIONS TOYOTA SAFETY SENSE SAFETY & EMERGENCY FEATURES
The “ENGINE START STOP”/ignition switch must be in the ACCESSORY or IGNITION
ON/”ACC” or “ON” position to be used.
120V AC(if equipped)
USB 2.1A
Instrument panel
USB 2.1A12V DC
Center console (front)
Center console (rear)
12V DC
Note: USB 2.1A for charging devices only.
Power outlets-
12V DC/120V AC/USB 2.1A (
if equipped)

18
Front fog lights come on only when the headlights are on low beam.
Daytime Running Light system (DRL) Automatically turns on the headlights at a reduced
intensity.
Automatic light cut off system Lights automatically turn off after a delay of 30 seconds, or
when lock switch on remote is pushed after all doors are locked.
Automatic High Beam (AHB) system Automatically switches between high and low beams
as appropriate to provide the most light possible and enhance forward visibility. Refer to
Toyota Safety Sense™ P (TSS-P) in this guide or the Owner’s Manual for more details on the
Automatic High Beam feature.
* Operating conditions must be met. Refer to Owner’s Manual for details.
Low beam
Parking lights
Auto
DRL OFFHigh beam
or
Auto High Beam*
High beam
flasherHeadlights
Turn
Right turn
Lane change
Lane change
Left turn
Lights & turn signals
HEADLIGHTS
FRONT FOG LIGHTS (IF EQUIPPED)
TURN SIGNALS
FEATURES & OPERATIONS

19
OVERVIEW FEATURES & OPERATIONS TOYOTA SAFETY SENSE SAFETY & EMERGENCY FEATURES
Up
Down
Automatic operation front row or all-position (if equipped) Push the switch
completely down or pull it completely up and release to fully open or close. To stop
the window partway, operate the switch in the opposite direction.
Window lock switch Deactivates all passenger windows. Driver’s window remains
operable.
DRIVER SIDE
WINDOW LOCK SWITCH
Enter/Set/ResetSelect an item/
change pages
Return to the
previous screen
Press: Displays the screen registered as the top
screen
Press and hold: Registers the currently displayed
screen as the top screen
Multi-Information Display (MID)
Windows-Power
4.2” COLOR DISPLAY
Push MID control switches to view or change information in the following:
Drive information
Navigation system linked display (if equipped)
Audio system-linked display (if equipped)
Driving assist information
Stop & Start Engine System information (if equipped)
Warning messages
Settings display

20
Microphone
Type A
Type B
Steering wheel telephone controls
Bluetooth
® technology allows dialing or receipt of calls without taking hands from
the steering wheel or using a cable to connect the compatible telephone and
the system. Refer to “Bluetooth
® Device Pairing Section,” in this guide, for more
information about phone connections and compatibility.
* Position of buttons may vary on some vehicles, for more details please refer to the
Owner’s Manual.
** Push and hold to access Mobile Assistant. Once you connect a compatible,
registered mobile phone, you can access Siri® Eyes Free using Mobile Assistant
access switch.
Refer to the Owner’s Manual and the Navigation System Owner’s Manual for more
details.
NOTE: Concentrating on the road should always be your first priority while
driving. Do not use the hands-free phone system if it will distract you.
Volume control
End callVoice command switch
Start call/
Mobile Assistant access**
Steering wheel switches
& telephone controls (Bluetooth®)*
FEATURES & OPERATIONS

21
OVERVIEW FEATURES & OPERATIONS TOYOTA SAFETY SENSE SAFETY & EMERGENCY FEATURES
The Stop & Start Engine System stops and restarts the engine according to the
brake pedal operation and other operations when the vehicle is stopped.
Stopping the engine
While driving with the shift lever
in D, depress the brake pedal,
and stop the vehicle.
Disabling the Stop & Start Engine
System
Press the Stop & Start Engine System
cancel switch to disable the system.
Stop & Start Engine System (if equipped)
If the engine is stopped by the Stop & Start Engine System when the vehicle is
on an incline, brake force is temporarily maintained to prevent rolling
backwards until the engine is restarted and drive force is generated.
When drive force is generated, the maintained brake force is automatically
canceled.
HILL-START ASSIST CONTROL (HAC)

22 Refer to section 7-1 of the Navigation System Owner’s Manual for more information.
Note: USB 2.0 for using auxiliary purpose.
This feature utilizes the vehicle’s built-in microphone to amplify the driver’s voice
through the rear speakers. To activate this feature, select “Driver Easy Speak” from
the Apps screen on the audio unit. The feature must be turned on every time you
enter the vehicle, and automatically turns off when any door (including the liftgate) is
opened. There are 7 volume settings.
By inserting a mini plug into the USB 2.0/AUX port, you can listen to music from
a portable audio device through the vehicle’s speaker system while in USB/AUX
mode.
Audio SystemRear seat entertainment
system (DVD player)
Remote control
AV input port
Rear seat entertainment system (if equipped)
Driver Easy Speak (if equipped)
USB 2.0/AUX port
FEATURES & OPERATIONS