2018 TOYOTA AVENSIS height

351-1. For safe use
1
AVENSIS_OM_OM20C79E_(EE)
For safety and security
Push the seat belt shoulder
anchor down while pressing the
release button.
Push the seat belt shoulder
anchor up.
Move the height adjuster up and
down as needed until you hear a
click.
The pretensioners help the seat
belts to quickly restrain the occu-
pants by retracting the seat belts
when the vehicle is subjected to
certain types of severe frontal or
side collision.
The pretensioners do not activate
in the event of a minor frontal
impact, a minor side impact, a rear
impact or a vehicle rollover.
Adjusting the height of the belt (front seats)
1
2
Seat belt pretensioners (front and outboard rear seats)

571-2. Child safety
1
AVENSIS_OM_OM20C79E_(EE)
For safety and security
Install the available child restraint system in vehicle upon confirming
the following items.
■Standards for child restraint systems
Use a child restraint system that conforms to ECE R44*1 or
ECE R129*1, 2.
The following approval mark is displayed on child restraint systems
which are conformed.
Check for an approval mark attached to the child restraint system.
Example of the displayed regu-
lation number
ECE R44 approval mark*3
The weight range of the child
who is applicable for an
ECE R44 approval mark is
indicated.
ECE R129 approval mark*3
The height range of the child
who is applicable as well as
available weights for an
ECE R129 approval mark is
indicated.
*1: ECE R44 and ECE R129 are U.N. regulations for child restraint sys-
tems.
*2: The child restraint systems mentioned in the table may not be available
outside of the EU area.
*3: The displayed mark may differ depending on the product.
Child restraint system
1
2

651-2. Child safety
1
AVENSIS_OM_OM20C79E_(EE)
For safety and security
Key of letters inserted in the above table:
X: Not suitable seat position for children in this mass group.
U: Suitable for “universal” category child restraint systems approved
for use in this mass group.
UF: Suitable for forward-facing “universal” category child restraint sys-
tems approved for use in this mass group.
*1: Adjust the seatback angle to the most upright position. Move the front seat
fully rearward. If the passenger seat height can be adjusted, move it to the
upper most position.
*2: If the head restraint interferes with your child restraint system, and the
head restraint can be removed, remove the head restraint.
Otherwise, put the head restraint in the upper most position.
Mass groups
Seating position
Recommended
Child Restraint
Systems
Front passenger
seatRear seat
Airbag manual
on-off switchOut-
boardCenter
ONOFF
0
Up to 10 kg
(22 lb.)
X U*1UU “TOYOTA G 0+,
BABY SAFE PLUS”
“TOYOTA MINI” 0+
Up to 13 kg
(28 lb.)
X U*1UU
I
9 to 18 kg
(20 to 39 lb.)
Rearward-
facing —
X
U*1, 2U*2U*2“TOYOTA DUO+” Forward-
facing —
UF*1, 2
II, III
15 to 36 kg
(34 to 79 lb.)
UF*1, 2U*1, 2U*2U*2
“TOYOTA KIDFIX
XP SICT”
(Can be fitted to the
ISOFIX mountings.)

711-2. Child safety
1
AVENSIS_OM_OM20C79E_(EE)
For safety and security
■Child restraint systems fastened with ISOFIX (ECE R44) - Com-
patibility and Recommended child restraint systems table
ISOFIX child restraint systems are divided in different “size class”.
According to this “size class”, you will be allowed to use it in the
vehicle seating position mentioned in the table below. To know your
child restraint system “size class” and “mass group”, please refer to
the child restraint system manual.
If your child restraint system has no “size class” (or if you cannot
find information in the table below), please refer to the child
restraint system “vehicle list” for compatibility information or ask the
retailer of your child seat.
Size classDescription
A Full-height, forward-facing child restraint systems
B Reduced-height forward-facing child restraint systems
B1 Reduced-height forward-facing child restraint systems
C Full-size rearward-facing child restraint systems
D Reduced-size rearward-facing child restraint systems
E Rearward-facing infant seat
F Left lateral-facing (carrycot) infant seat
G Right lateral-facing (carrycot) infant seat

1663-3. Adjusting the seats
AVENSIS_OM_OM20C79E_(EE)
Front seats
Manual seat
Seat position adjustment lever
Seatback angle adjustment
lever
Vertical height adjustment lever
(driver’s side)
Lumbar support adjustment
switch (if equipped for driver’s
side)
Power seat
Seat position adjustment switch
Seatback angle adjustment
switch
Seat cushion (front) angle
adjustment switch
Vertical height adjustment
switch
Lumber support adjustment
switch (driver’s side)
Adjustment procedure
1
2
3
4
1
2
3
4
5

1733-3. Adjusting the seats
3
Operation of each component
AVENSIS_OM_OM20C79E_(EE)
■ Installing the head restraints
■ Adjusting the height of the head restraints (front seats)
■ Adjusting the rear seat head restraint
Align the head restraint with the installa-
tion holes and push it down to the lock
position.
Press and hold the lock release button
when lowering the head restraint.
Make sure that the head restraints are
adjusted so that the center of the head
restraint is closest to the top of your ears.
Always raise the head restraint one level
from the stowed position when using.
WARNING
■ Head restraint precautions
Observe the following precautions regarding the head restraints. Failure to
do so may result in death or serious injury.
● Use the head restraints designed for each respective seat.
● Adjust the head restraints to the correct position at all times.
● After adjusting the head restraints, push down on them and make sure
they are locked in position.
● Do not drive with the head restraints removed.
Lock
release
button

1763-4. Adjusting the steering wheel and mirrors
AVENSIS_OM_OM20C79E_(EE)
Inside rear view mirror
The height of the rear view mirror can be adjusted to suit your driving
posture.
Adjust the height of the rear view
mirror by moving it up and down.
The rear view mirror’s position can be adjusted to enable suffi-
cient confirmation of the rear view.
Adjusting the height of rear view mirror (vehicles with auto anti-
glare inside rear view mirror)

2034-1. Before driving
4
Driving
AVENSIS_OM_OM20C79E_(EE)
Sedan
460 mm (18.1 in.)
460 mm (18.1 in.)
460 mm (18.1 in.)
460 mm (18.1 in.)
460 mm (18.1 in.)
460 mm (18.1 in.)
1110 mm (43.7 in.)
35 mm (1.4 in.)
369 mm (14.5 in.)
*1
374 mm (14.7 in.)*2
392 mm (15.4 in.)*3
391 mm (15.4 in.)*4
320 mm (12.6 in.)
385 mm (15.2 in.)
575 mm (22.6 in.)
*1: 205/60R16 tires*5
*2: 215/55R17 or 225/45R18 tires*5
*3: 205/60R16 tires with vehicle height up*5
*4: 215/55R17 tires with vehicle height up*5
*5: To distinguish the vehicle type, ask any authorized Toyota retailer or Toyota
authorized repairer, or any reliable repairer.
Installation positions for the towing hitch/bracket and hitch ball
1
2
3
4
5
6
7
8
9
10
11
12