2018 Seat Toledo Owner's manual

Operating modes
Insert or eject a CD  Not available for model: Media System
T
ouch/Col
our Fig. 194
Slots for data storage devices in the
gl ov

e compartment. The driver should refrain from operating the
unit whil
e the v
ehicl

e is in motion. Insert or
change the data storage device before mov-
ing off!
The CD drive can play audio CDs and audio
data CDs.
Inserting a CD

Infotainment System
The USB port  supplies the usual USB v olt
-
age of 5 v olts for a USB connection.
External hard disks with a capacity greater
than 32 GB must be reformatted for the FAT32
file system in some circumstances. You will
find the necessary software and information
on the Internet.
Take into account all other instructions and
limitations regarding requirements for media
sources.
Disconnecting
Any connected data storage devices must
be prepared before their disconnection in or-
der to remove them.

Operating modes
Starting Bluetooth

Infotainment System
Function button: function
$ The image viewed was obtained via
GPS localisation and upon pr
essing
this function butt
on, the navigator
menu opens to start a route to this
destination.
 /  Rotate the view of the image to the
left or the right.
j R
eset the vie

w of the image.
N To stop the playback of a slideshow.
The
N function button changes to
b .
b To continue the playback of a slide-
show
. The b function button
changes to N .
 /
 To change to the PREVIOUS
or
NEXT image.
The same function can be per -
f

ormed by sliding your finger hori-
zont

ally across the screen.
SETTINGS Open the Image settings menu.Enlarging or reducing the view
T
o enl
ar

ge or reduce the view of the image
displayed:

Operating modes
Instructions for navigation When the Infotainment system is unable to re-
ceive any dat
a fr
om GPS satellites (due to a
dense tree canopy, underground car park),
navigation can still continue using the vehicle
sensors.
Possible limitations in navigation
In areas that are not or are only partially digi-
tised on the data storage device, the Infotain-
ment system will still attempt to provide route
guidance.
Navigation area and updating navigation
data
Roads and streets are subject to constant
change (e.g. new roads, changes to street
names and building numbers). Therefore, if
the navigation data is not updated, then er-
rors or inaccuracies may occur during guid-
ance.
SEAT recommends updating navigation data
on a regular basis. Up to date navigation data
can be downloaded from www.seat.com or
acquired at a SEAT dealer. Updating and using navigation da-
ta fr
om an SD car

d The Infotainment system always requires the
navigation data that is curr
ently v

alid for this
unit in order to allow all functions to be used
in full. Using an old version may lead to errors
during navigation.
Updating navigation data
The current navigation data can be downloa-
ded in the internet at www.seat.com and stor-
ed in a SD card compatible with the unit.
Suitable SD Cards can be acquired at SEAT
dealerships.
The procedure is described on the internet at
www.seat.com.
Using navigation data

Infotainment System
Navigation main menu Fig. 197
Navigation main menu The Navigation main menu all
o
ws you t o se-
lect a new destination, call up a previously
used or stored destination and search for
points of interest.
Opening the main Navigation menu

Operating modes
not in the post code ar
ea you hav e selected
in a previous window, you will not be able to
find the street at the street selection stage. Function button: function
Country : To select the desired country.
City : To enter the desired city or postcode.
Street : To enter the desired street name.
House number : To enter the desired house number.
Junction : To select the desired intersection.
Last destinations : Open the My destinations
menu

Infotainment System
For other adjustments to the navigation rec-
ommendations, sel ect
Navigation ! Set-
tings ! Navigation announcements
settings. Note