2018 Seat Toledo Owner's manual

Fuses and bulbs
Full-LED headlight system*
Full -LED headlights handl
e all light functions
(daylight, side light, t
urn signal, dipped beam
and route light) with light emitting diodes
(LEDs) as a light source.
Full-LED headlights are designed to last the
lifetime of the car and light bulbs cannot be
replaced. In case of headlight failure, go to an
authorised workshop to have it replaced.
Double headlight bulb change
Changing bulbs requires a certain degree of
practical skill. If in doubt, we recommend you
have defective bulbs changed by a special-
ised service or, in case of an emergency, seek
professional assistance.

Emergencies
Side lights
Main beam headlights
Dipped beam headlights
T urn signal lights
Daylight
Changing side light bulbs Fig. 90
Changing side light bulbs.

Fuses and bulbs

Emergencies
Changing the fog light bulbs Fr ont f
og light bulb Fig. 96
Fog light: remove the grille Fig. 97
Fog light: detach the bulb holder

Fuses and bulbs
Check which of the bulbs is defective.

Emergencies
Position of the bulbs

Fuses and bulbs
Fig. 105
Remove the bulb holder. The rear lid must be open to change the
bulbs.
Y
ou can access the bulb hol
der f
or the inner
tail lights through the inside of the rear lid.

Emergencies
Note
Check the condition of the seal. If dam-
aged, a repl acement can be acquir
ed from
an Official Service. Changing the side and num-
ber plat
e bulbs
Side t

urn signals Fig. 107
Turn signal integrated in the rear view
mirr or The side turn signals are LEDS and are inte-
gr
at
ed in the e

xterior mirrors.
In case of failure, go to an authorised work-
shop to have them replaced. Changing the bulb on the number
plate
Fig. 108
Removing number plate light Fig. 109
Changing the bulb. Removing the bulb holder