Seat Features
Forward And Rearward Adjustment
The adjusting bar is at the front of the seat, near
the floor. Pull the bar upward to move the seat
forward or rearward. Release the bar once the
seat is in the desired position. Then, using body
pressure, move forward and rearward on the
seat to be sure that the seat adjusters have
latched.Lumbar Support — If Equipped
This feature allows you to increase or decrease
the amount of lumbar support. The lumbar
control knob is located on the rear upper out-
board side of the driver's seatback. Rotate the
control forward to increase and rearward to
decrease the desired amount of lumbar sup-
port.
Height Adjustment (Without Swivel Seat) — If
Equipped
The height adjusting levers are located on the
center outboard side of the seat. Lift the front
lever with little or no weight applied to the seat,
to raise the front on the seat. Lift the front lever
with weight applied to the seat to lower it.
Follow these instructions for the rear lever to
adjust the rear of the seat.
Driver’s Seat
1 — Forward/Rearward Adjustment Bar
2 — Front Height Adjusting Lever
3 — Rear Height Adjusting Lever
4 — Recliner Adjusting Knob
5 — Lumbar Adjustment Knob
SEATS
