Automated Manual Transmission
— Diesel Only
Your new vehicle is equipped with an energy
efficient Automated Manual Transmission
(AMT). This transmission is a Conventional Six-
Speed Manual Transmission with an electroni-
cally controlled hydraulic system that controls
the clutch and gear shifting.
In forward gears, this transmission offers two
modes of operation: Automatic (D) Mode –
where the electronic system controls the gear
shifts, and MANUAL (M) Mode – where the
driver controls the transmission shifting by tog-
gling the gear selector rearward or forward (+/-)
to upshift or downshift.As with any new technology, the transmission
has some unique characteristics that may be
unfamiliar. These include:
• The Automated Manual Transmission must
be in NEUTRAL (N) to start the vehicle.
Press and hold the brake pedal, then place
the gear selector in NEUTRAL (N), before
attempting to start the engine.
• To drive, press the brake pedal and start the engine, then move the gear selector from
NEUTRAL (N) to the desired position.
• The actual transmission gear range (R, N, D, 1, 2, 3, 4, 5 or 6) is displayed in the
instrument cluster display whenever the en-
gine is running.
• When the key is turned OFF, the transmis- sion remains in its previous gear position,
regardless of the gear selector position.
• When the key is turned ON (engine off), the instrument cluster display may indicate the
gear selector position rather than the actual
transmission gear position. • Engine torque is interrupted briefly during
the transmission upshifts, making these
shifts more abrupt than a typical automatic
transmission. This is normal.
• Although transmission shifting is performed automatically, the vehicle will not "creep"
when the brake pedal is released and may in
fact roll backward on an incline. Leaving
from a stop, the accelerator pedal must be
pressed to transmit driving torque to the
wheels.
• With the vehicle at a standstill and a gear engaged, keep the brake pedal pressed until
you decide to drive away. Then release the
brake and accelerate gradually.
• Do not use the accelerator to keep the ve- hicle at a standstill (for example, holding on
a hill); the clutch could be damaged by
overheating. Use the brake pedal instead
and operate the accelerator only when you
are ready to drive away.
• Do not press the brake and accelerator ped-als at the same time. Use only one foot to
operate the brake and accelerator. When
starting on a hill, it may be helpful to engage
the parking brake to hold the vehicle, and
then release the parking brake as you accel-
erate from the stop.
• If the vehicle is moving, REVERSE engage- ment will only occur if the vehicle speed is
less than 2 mph (3 km/h). Otherwise, a
chime will sound, a "Shift not Allowed" mes-
sage will appear in the instrument cluster
display, and the transmission will shift to
NEUTRAL. Return the gear selector to NEU-
TRAL, bring the vehicle to a complete stop,
and then shift to REVERSE.
• During closed-throttle decelerations in MANUAL (M) mode, the transmission will
shift down through the gears automatically
(to prevent engine lugging), coming to first
gear at a stop. After a stop, the driver should
manually upshift (+) the transmission as the
vehicle is accelerated. • Very aggressive driving may result in some
clutch odor. A warning message will appear
in the instrument cluster display if cool
down actions are needed.
• Like a manual transmission, mechanical sounds may be heard under normal operat-
ing conditions. You may also notice a hy-
draulic pump running occasionally, even be-
fore starting the engine. This is normal and
will not damage the vehicle.
• Never leave your vehicle with the transmis- sion in NEUTRAL (N). Always place your
vehicle in gear when leaving the vehicle. It is
essential to wait until the gear engaged ap-
pears in the display before turning the en-
gine off and releasing the brake pedal. Al-
ways remember to set the parking brake
when leaving the vehicle. For further information, and applicable warn-
ings and cautions, please refer to the Diesel
Supplement at www.mopar.com/en-us/care/
owners-manual.html (U.S. Residents) or
www.owners.mopar.ca (Canadian Residents).
Interior Bulb Replacement
For proper interior bulb replacement proce-
dures, refer to “Bulb Replacement” in "In Case
Of Emergency” located in the Owner’s Manual
at
www.mopar.com/en-us/care/owners-manual.html
(U.S. Residents) or www.owners.mopar.ca (Ca-
nadian Residents).
