
59
Remote control problem
Following disconnection of the vehicle battery, 
replacement of the remote control battery or 
in the event of a remote control malfunction, 
you can no longer unlock, lock or locate your 
vehicle.
F 
F
 irst, use the integral key in the door lock to 
unlock or lock your vehicle.
F
 
T
 hen reinitialise the remote control.
Reinitialisation 
F Unlock the driver's door using the integral key.
F
 
P
 lace the integral key in the lock to unlock 
your vehicle. F
 
P
 ress one of the remote control 
buttons.
Locking the side-hinged doors
F If fitted to your vehicle, check that the  electric child lock is not on.
F
 
O
 pen the left-hand side-hinged door. 
Unlocking
F Use the interior door handle.F  
I
 nsert the key (without forcing) into the latch 
aperture located on the edge of the door 
and slide the assembly upward.
F  
R
 emove the key. 
F  
C
 lose the door and check from the outside 
that it has locked correctly.
For more information on the Child lock , 
refer to the corresponding section. If the problem persists, contact a 
PEUGEOT dealer or a qualified workshop 
as soon as possible.
F  
P
 lace the remote control against the reader.
F  
K
 eep it into place and switch the ignition on, 
pressing "START/STOP".
The remote control is now fully operational 
again.
2 
Access  

60
Changing the battery
Battery type: CR2032 / 3 volts.
T his replacement battery is available from a 
PEUGEOT dealer or a qualified workshop.
A message is displayed in the instrument panel 
screen when replacement of the battery is 
needed.
Do not throw the remote control 
batteries away, they contain metals 
which are harmful to the environment.
Take them to an approved collection 
point.
F
 
U
 nclip the cover using a small screwdriver 
at the cut-out.
F
 
R
 emove the cover.
F
 
R
 emove the dead battery from its 
compartment.
F
 
F
 it the new battery into its compartment 
observing the original fitting direction.
F
 
C
 lip the cover onto the casing. Lost keys, remote control
Go to a PEUGEOT dealer, taking with you the 
vehicle's registration certificate, your personal 
identification documents and if possible, the 
label bearing the key code.
The PEUGEOT dealer will be able to retrieve 
the key code and the transponder code 
required to order a new key.
Remote control
The high frequency remote control is a 
sensitive system; do not operate it while it is 
in your pocket as there is a possibility that 
it may unlock the vehicle, without you being 
aware of it.
Do not repeatedly press the buttons of your 
remote control out of range and out of sight 
of your vehicle. You may stop it from working 
and the remote control would have to be 
reinitialised.
The remote control does not operate when 
the key is in the ignition, even when the 
ignition is switched off.
Locking the vehicle
Driving with the doors locked may make 
access to the passenger compartment by 
the emergency ser vices more difficult in an 
emergency.
As a safety precaution (with children on 
board), remove the key from the ignition or 
take the remote control with you when leaving 
the vehicle, even for a short time.Electrical interference
The 
 K eyless Entry and Starting remote 
control may not operate if close to certain 
electronic devices: telephone, laptop 
computer, strong magnetic fields, etc.
Anti-theft protection
Do not make any modifications to the 
electronic engine immobiliser system; this 
could cause malfunctions.
Do not forget to turn the steering to engage 
the steering lock.
When purchasing a second-hand vehicle
Have the key codes memorised by a 
PEUGEOT dealer, to ensure that the keys in 
your possession are the only ones which can 
start the vehicle. 
Access  

61
Accumulations (water, dust, grime, salt, 
etc.) on the inner sur face of the door 
handle may affect detection.
If cleaning the inner sur face of the door 
handle using a cloth does not restore 
detection, contact a PEUGEOT dealer or a 
qualified workshop.
A sudden splash of water (stream of water, 
high pressure jet washer, etc.) may be 
identified by the system as the desire to 
open the vehicle.Locking/unlocking from 
inside
Locking the vehicle
This button is inoperative if the vehicle 
has been locked or deadlocked from 
outside (using the key, remote control or 
Keyless Entry and Starting, depending 
on equipment) or if one of the opening 
elements is still open.
Automatic
The cab doors lock automatically while driving 
(speed above 6  mph (10   km/h)); the indicator 
lamp comes on.
F
 
T
 o activate or deactivate this 
function, with the ignition on, 
press this button until a message 
appears in the screen.
Manual
The indicator lamp comes on to confirm the 
locking.
When carrying long objects with the 
tailgate or rear doors open, you can press 
this button to lock just the cab doors.
When locking from inside, the door mirrors 
do not fold.
Driving with the doors locked could make 
it difficult for the emergency ser vices to 
enter the vehicle in an emergency.
If the vehicle is deadlocked or locked with 
the remote control or the door handles, 
the button is not operational. Then, use 
the key or remote control to unlock. F
 
P
 ress this button.
2 
Access  

62
F Press this button.
The indicator lamp also goes off when 
unlocking one or more doors.
Locking/unlocking the 
loading area
This button is unavailable if the vehicle 
has been locked or deadlocked from 
outside (using the key, remote control or 
Keyless Entry and Starting, depending 
on equipment) or if one of the opening 
elements is still open.
Unlocking the vehicle
The indicator lamp goes off to confirm the 
unlocking.
Automatic
Manual
Cab  and loading area selectivity 
disabled.
F
 
W
 ith the vehicle unlocked, press 
this button.
F
 
W
 ith the vehicle locked, press 
this button.
Cab  and loading area  selectivity 
enabled.
F
 
W
 ith the loading area  unlocked, 
press this button.
The loading area
 is always locked when 
driving.
The indicator lamp comes on to confirm the 
vehicle i s locked.
The indicator lamp goes off to confirm the 
vehicle  is unlocked.
The indicator lamp comes on to confirm that 
the loading area  is locked. F
 
W
 ith the loading area locked, 
press this button.
Driving with the doors locked could make 
it difficult for the emergency ser vices to 
enter the vehicle in an emergency.
The indicator lamp also goes off when 
unlocking one or more opening elements 
of the loading area .
For energy efficiency purposes, with the 
ignition off and vehicle fully locked, the 
indicator lamp goes off.
For more information on the Key, Remote 
control or 
 
K
 eyless Entr y and Star ting, 
and in particular programming the 
selective locking of the loading area, refer 
to the corresponding section.
The indicator lamp goes off to confirm that the 
loading area
 is unlocked.
To deactivate the automatic locking 
function, go to a PEUGEOT dealer or a 
qualified workshop. 
Access  

63
Front doors
Opening
From outside
F After unlocking the vehicle (using the key, remote control or   K eyless Entry and 
Starting, depending on equipment), pull the 
door handle.
For more information on the Key, Remote 
control or 
 
K
 eyless Entr y and Star ting , 
and in particular unlocking the vehicle, 
refer to the corresponding section.
From inside
If the door is unlocked, pull the handle to 
open the door.
The interior door controls do not operate 
when the vehicle is deadlocked.
Vehicle locked.
Cab  and loading area  selectivity 
deactivated and vehicle locked.
Cab  and loading area  selectivity 
activated and vehicle locked.
F
 
P
ull the interior control lever on a door to 
totally unlock the vehicle and open the 
d o o r.
F
 
P
ull the interior control lever on a door to 
unlock the cab  and open the door. F
 
P
 ull the interior control lever on a door to 
totally unlock the vehicle and open the 
d o o r.
2 
Access  

64
Closing
F Push or pull the door to close it, then lock it.When a door is not closed correctly:
-
 
w
 ith the vehicle stationary and the 
engine running, this warning lamp 
comes on, accompanied by an 
alert message for a few seconds,
-
 
w
 ith the vehicle moving (speed 
above 6
  mph (10   km/h)), this 
warning lamp comes on, 
accompanied by an audible signal 
and an alert message for a few 
seconds.
For more information on the Key, Remote 
control or 
 
K
 eyless Entr y and Star ting , 
and in particular unlocking the vehicle, 
refer to the corresponding section.
Manual sliding side 
d o o r (s)
From outside
F After unlocking the vehicle (using the  key, remote control or   K eyless Entry and 
Starting, depending on equipment), pull the 
door handle.
For more information on the Key, Remote 
control or 
 
K
 eyless Entr y and Star ting , 
and in particular unlocking the vehicle, 
refer to the corresponding section.From inside
To hold the sliding side door in the open 
position, open the door fully to engage the 
latch (located at the bottom of the door).
Take care not to block the guide space 
on the floor to allow the door to slide 
c o r r e c t l y.
As a safety measure and for functional 
reasons, do not drive with the sliding side 
door open. 
Access  

66
From inside
F Push the handle for ward to close the door, and, if necessary, lock the vehicle. For more information on the Key, Remote 
control or 
 
K
 eyless Entr y and Star ting
, 
and in particular unlocking the vehicle, 
refer to the corresponding section.
If a sliding side door is not fully closed:
-  
w
 ith the vehicle stationary and the 
engine running, this warning lamp 
comes on, accompanied by an 
alert message for a few seconds,
-  
w
 ith the vehicle moving (speed 
above 6   mph (10   km/h)), this 
warning lamp comes on, 
accompanied by an audible signal 
and an alert message for a few 
seconds.
Electric sliding side 
d o o r (s)
The exterior and interior door handles and the 
interior buttons allow the electrically powered 
movement of the door to be started.
Opening and closing of the doors is 
accompanied by an audible signal.
Opening
From outside
Using the remote control
F With the door unlocked, press  and hold this button until the 
corresponding sliding side door 
has opened. 
Access  

67
F Press this button again to reverse the movement of the 
d o o r.
The remote controls buttons are not active 
with the ignition switched on.
Using the handle
F With the door unlocked, pull and release  the handle to start the electrically powered 
opening of the door.
F
 
P
 ull the handle again to reverse the 
movement of the door.
From inside
Using the handle
Vehicle locked
Cab  and loading area  selectivity 
deactivated.
F
 
P
ull the handle toward the rear to fully  
unlock the vehicle and start the electrically 
powered opening of the door.
Vehicle unlocked
Child lock deactivated.
From inside, total unlocking 
then opening
Cab  and loading area  selectivity 
activated.
F
 
P
ull the handle toward the rear to unlock 
the loading area  and start the electrically 
powered opening of the door. Cab
 and loading area  selectivity 
deactivated.
For more information on the Key, Remote 
control or   K eyless Entr y and Star ting
, 
and in particular the total or selective 
unlocking, refer to the corresponding 
section.
F
 
P
 ull the handle toward the rear to start the 
electrically powered opening of the door.
2 
Access