2018 NISSAN TITAN remote control

∙ Different types of batteries have dif-ferent characteristics. Do not mix dif-
ferent types.
∙ Remove the batteries if the head- phones are not used for a month or
longer.
REMOTE CONTROL OPERATION
Before attempting to operate your remote
control, install the batteries described be-
low. 1. Turn the remote control face down.
Press down on the ridged area of the
battery cover and slide it off.
2. Install two “AAA” batteries. Make sure that proper polarity (+ or —) is observed.
3. Slide the cover back into place until it clicks.
NOTE:
The remote control will only operate this
device. It is not a universal remote con-
trol and will not control other equipment.
WARNING
∙ Keep the batteries out of the reach of children. Should the batteries be
swallowed, immediately consult a
doctor. Also, when disposing of used
batteries, please comply with govern-
mental regulations or environmental
public institution rules that apply in
your country/area.
LHA3848
4-98Monitor, climate, audio, phone and voice recognition systems

CAUTION
∙ Always ensure that the batteries areinserted with the positive and nega-
tive terminals in the correct direction
as shown in the battery
compartment.
∙ Different types of batteries have dif- ferent characteristics. Do not mix dif-
ferent types.
∙ Do not mix old and new batteries. Mix- ing old and new batteries will shorten
battery life and/or cause chemical
leaks from the old batteries.
∙ When batteries fail to function, re- place them immediately.
∙ Remove the batteries if the remote control is not used for a month or
longer.
REMOTE CONTROL BUTTONS
1. POWER button
2. SOURCE button
3. SETUP button 4. EJECT button
5. DVD-B button
6. SOUND AROUND SELECT button
7. PIX button
8. REPEAT button
9. RIGHT button
10. ENTER button
11. A-B button
12. R-S button
13. ERASE/ADD button
14. AUDIO button
15. ANGLE button
16. GO TO button
17. DISPLAY button
18. PROGRAM button
19. RANDOM button
20. 3D button
21. PBC (Video CD only) button
22. ZOOM button
23. NEXT button
24. PREV button
LHA4093
Monitor, climate, audio, phone and voice recognition systems4-99

25. FF (Fast forward) button
26. FR (Fast rewind) button
27. STOP button
28. PLAY/PAUSE button
29. Number Keys
30. SUBTITLE button
31. TITLE button
32. CH-SEARCH/SKIP button
33. AUTO MEMORY button
34. DOWN button
35. RETURN button
36. LEFT button
37. UP button
38. MENU button
39. MUTE button
40. SOUND AROUND ON/OFF button
41. DVD-A button
NOTE:
The following remote control functions
do not apply to this model: A-B and Pro-
gram.POWER button
Press this button to turn the monitor on.
Press this button again to turn the monitor
off.
Source button
Press this button to cycle between monitor
A audio/video sources and monitor B
audio/video sources.
Setup button
Press this button to navigate the DVD OSD
menu. For additional information, refer to
“How to use the DVD OSD menu” in this
section.
Eject button
Press this button to eject the disc.
DVD–B button
Press this button to transmit the remote
control codes and functions to operate
monitor B.
SOUND AROUND SELECT button
Selects a FM transmitter channel.
PIX button
Press this button to access the picture ad-
justment menu and select between
BRIGHTNESS, CONTRAST, SATURATION,
HUE, SHARPNESS, IR HEADPHONE, LAN-
GUAGE, and RESET. Press the
orbuttons to adjust the screen.
REPEAT button
Press this button to select between differ-
ent repeat modes.
ENTER button
Press this button to make a selection or
begin playback of the media.
RIGHT button
Press this button to navigate right when
displaying a menu or file list.
A-B button
Press the A-B button once to set point A
and then press again to set point B. Play-
back will now repeat between point A and
point B.
R-S button
Non-functioning.
4-100Monitor, climate, audio, phone and voice recognition systems

TITLE button
Press this button to navigate the title menu
if included on the disc.
CH- SEARCH/SKIP button
Non-functioning.
AUTO MEMORY button
Non-functioning.
DOWN button
Press this button to navigate down when
displaying a menu or file list.
RETURN button
Press this button to return to a previous
menu screen.
LEFT button
Press this button to navigate lef t when dis-
playing a menu or file list.
UP button
Press this button to navigate up when dis-
playing a menu or file list.
MENU button
Press this button to go to the root menu if
included on the disc.
MUTE button
Press this button to mute the audio when
playing discs or playing files from a USB
device. Press this button again to resume
audio.
SOUND AROUND ON/OFF
Turns the FM transmitter ON/OFF.
DVD–A button
Press this button to transmit the remote
control codes and functions to operate
monitor A.
GENERAL OPERATING
INSTRUCTIONS
Turning the monitor ON or OFF
1. Press the POWER button on the frontpanel or the remote control to turn the
monitor on or off. When powered on,
the front panel controls will illuminate.
2. Af ter the monitor has been turned on and is displaying a picture, adjust the viewing angle by pivoting the screen to
optimize the picture quality.
3. Remember to turn the monitor off and return the LCD monitor to the fully
closed (upright) position when not in
use.
Listening through vehicle
speakers
Press the AUX button on the factory radio
and toggle through AUX screens to select
VTRF — Jack to listen to the audio from
monitor A.
Sharing sources between Monitor
A and Monitor B
The source button on your monitor unit or
remote control allows viewing monitor A
video on monitor B and vice versa. Press
the source button to cycle through avail-
able video sources.
Disc/DVD Basic Operation
To get the most use out of each disc, make
sure you read this section completely.
For additional information, refer to “CD care
and cleaning” in this section.
4-102Monitor, climate, audio, phone and voice recognition systems

General Setup Page
Press the SETUP button on the remote
control. Use the
orand
the
orbuttons to navi-
gate the Setup Page. Press ENTER to select
and then
to return to the sub-
–menu. To cancel the Setup Display, press
the SETUP button on the remote.
OSD Language
The OSD Lang sub-menu allows the user to
select the language for the on-screen dis-
play. When the OSD Lang option is high-
lighted, press the
button once
and then use the
orbut-
tons on the remote control to select the
desired language. The user can select Eng-
lish, Simplified/Traditional Chinese, French,
German, Italian, Spanish, Portuguese, or
Korean for the OSD language. Press ENTER
to select and then the
button to
return to the sub-menu.
Angle Mark
The angle mark is an option for different
viewing angles on the DVD. When the Angle
Mark option is highlighted, press
the
button once and then use
the
orbuttons on the re-
mote control to turn the angle mark set-
ting on or off. Press ENTER to select and
then the
button to return to the
sub-menu.
LHA3851LHA3852LHA3853
4-104Monitor, climate, audio, phone and voice recognition systems

Speaker Setup Page
Downmix— When the Downmix option is
highlighted, press the
button
once and then use the
orbuttons on the remote control
to select between Stereo or LT/RT. Press
ENTER to select and then the
but-
ton to return to the sub-menu.
Video Setup Page
Video Quality — When the Quality option is
highlighted, press ENTER and then use
the
orand the
orbuttons on the remote control
to select between the various video quality
settings. Press ENTER to select and then
the
button to return to the sub-
menu.
Video Quality Setup
Option Description Range De-
fault
Sharpness Adjust to
sof ten or
sharpen the picture. Low/
Med/ High Low
Brightness Adjust to
brighten or darken the picture. -20 —
+20 00
LHA3854LHA3855LHA3856
Monitor, climate, audio, phone and voice recognition systems4-105

Option Description RangeDe-
fault
Contrast Adjust to in-
crease or de- crease pic-
ture contrast. -16 —
+16 00
Gamma Adjust to in-
crease or de- crease the picture
gamma. Low/
Med/
High/ None None
Hue Adjust to in-
crease or de- crease thecolor hue. -09 —
+09 00
Saturation Adjust to in-
crease or de- crease color intensity. -09 —
+09 00
Luma De- lay Adjust to
change the
Luma delay. 0T or 1T 1T
Preference Page
If a disc or USB device is playing, press STOP
twice (full stop). Press the SETUP button on
the remote control. Use the
orand theorbuttons on the remote control to navigate
the Setup Page. Press ENTER to select and
then the
to return to the sub-
menu.
Audio
The Audio sub-menu allows the user to
select the audio stream in the desired lan-
guage for playback. When the Audio option
is highlighted, press the
button
once and then use the
orbuttons on the remote control
to select the desired language. The user
can select English, French, Spanish, Chi-
nese, Japanese, German, Portuguese, Ital-
ian, Korean, Russian or Thai for the audio
stream language. Press ENTER to select
and then the
button to return to
the sub-menu. The DVD title must include
LHA3857LHA3858
4-106Monitor, climate, audio, phone and voice recognition systems

the desired audio stream in order for it to
be heard during playback.
Subtitle
The Subtitle sub-menu allows the user to
select the subtitle in the desired language
for playback. When the Subtitle option is
highlighted, press the
button
once and then use the
orbuttons on the remote control
to select the desired language. The user
can select English, French, Spanish, Chi-
nese, Japanese, German, Portuguese, Ital-
ian, Korean, Russian, Thai or OFF for the
subtitle language. Press ENTER to select
and then the
button to return to
the sub-menu. The DVD title must include the desired audio stream in order for it to
be heard during playback.
LHA3859
Monitor, climate, audio, phone and voice recognition systems4-107