2018 MINI Countryman Owner's Manual

'

Camera
The camera lens is located in the handle of the
tailgate.
The image quality may be impaired by dirt. If
necessary, clean the camera lens.
Switching
on/off
Switching
on
automatically
The system is switched on automatically if se~
lector lever position R is engaged when the en~ gine is running.
Automatic
deactivation
during
forward
travel
The system switches off when a certain driving
distance or speed is exceeded.
Switch the system back on, if needed.
If
the
vehicle
is
equipped
accordingly:
switching
on/off
manually
Press park assistance button.
'

Pathway lines depend on the current steeringangle and are continuously adjusted to the
steering wheel movements.
Turning
radius
lines
Turning radius lines can be superimposed on
the image of the rearview camera.
Turning radius lines show the course of the
smallest possible turning radius on a level road.
Only one turning radius line is displayed after
the steering wheel is turned past a certain an~
gle.
Obstacle
marking
If the vehicle is equipped accordingly, obstaclemarkings can be faded into the image of the
rearview camera.
The colored thresholds of the obstacle mark~
ings match the markings of the PDC Park Dis~ tance Control.
Parking
using
pathway
and
turningradius
lines1.Position the vehicle so that the turning ra~
dius lines lead to within the limits of the
parking space.2.Turn the steering wheel to the point where the pathway line covers the corresponding
turning radius line.
Display
settings
Brightness
With the rearview camera switched on:
1. Select the symbol.2.Turn the Controller until the desired setting
is reached and press the Controller.
Contrast
With the rearview camera switched on:
1. Select the symbol.2.Turn the Controller until the desired setting
is reached and press the Controller.Seite 171Driving
comfortCONTROLS171
Online Edition for Part no. 01402983567 - X/17

System
limits
Detection
of
objects
Very low obstacles or high, protruding objects
such as ledges may not be recognized by the system.
If the vehicle is equipped accordingly, certain
assistance functions also take into account data from PDC Park Distance Control.
Follow the notes in the PDC Park Distance Con~ trol chapter.
The objects displayed on the Control Display
may be closer than they appear. Therefore, do
not estimate the distance from the objects on
the display.
Parking
assistant Concept
This system assists the driver in parking parallel
to the road.
General
information
Parking assistant handling is divided into three
steps:
'

Ultrasound
sensors
The ultrasound sensors for measuring parking
spaces are located on the wheel housing.
Functional
requirements
Ultrasound
sensors Ensure full functionality:
'

'

'

Climate
controlVehicle
features
and
op