2018 MINI Countryman Owner's Manual

DeactivatingSlide the switch to the passenger's sidemirror position.
Interior
mirror,
manually
dimmable Flip
lever
To reduce the blinding effect of the interiormirror, flip the lever forward.
Turn
knob
Turn the knob to reduce the blinding effect by the interior mirror.
Interior
mirror,
automatic
dimming
feature
Overview
Photocells are used for control:
'

Settings1.Fold the lever down.2.Move the steering wheel to the preferred
height and angle to suit your seating posi~ tion.3.Fold the lever back up.Seite 82CONTROLSSettings82
Online Edition for Part no. 01402983567 - X/17

Transporting
children
safelyVehicle
features
and
op

Safety
informationWARNING
Active front-seat passenger airbags can
injure a child in a child restraint system when
the airbags are activated. There is a risk of in~ jury. Make sure that the front-seat passengerairbags are deactivated and that the PASSEN~
GER AIRBAG OFF indicator light lights up. '

best possible position for the belt and to offer
optimal protection in the event of an accident.
If the upper anchorage of the safety belt is lo~
cated in front of the belt guide of the child seat,
move the front passenger seat carefully for~
ward until the best possible belt guide position is reached.
Child
seat
security
The rear safety belts and the front passenger
safety belt can be permanently locked to fasten
child restraint systems.
Locking
the
safety
belt1.Pull out the belt strap completely.2.Secure the child restraint system with the safety belt.3.Allow the belt strap to be pulled in and pull
it tight against the child restraint system.
The safety belt is locked.
Unlocking
the
safety
belt
1.Unbuckle the safety belt buckle.2.Remove the child restraint system.3.Allow the belt strap to be pulled in com~ pletely.
In some cases it may be necessary to separate
the lower belt attachment. Safety belts, refer to
page 75.
LATCH
child
restraint
fixing
system
General
information
LATCH: Lower Anchors and Tether for Children.
Pay attention to the operating and safety infor~
mation of the child restraint system manufac~ turer when installing and using LATCH child re~
straint fixing systems.
Mounts
for
the
lower
LATCH
anchors The lower anchors may be used to attach theCRS to the vehicle seat up to a combined child
and CRS weight of 65 lb/30 kg when the child is
restrained by the internal harnesses.
Safety
information WARNING
If the LATCH child restraint fixing systems
are not correctly engaged, the protective effect
of the LATCH child restraint fixing system canbe limited. There is a risk of injuries or danger to life. Make sure that the lower anchors are se~
curely engaged and that the LATCH child re~
straint fixing system fits securely against the
backrest. '

PositionSymbolMeaningThe corresponding symbol
shows the mounts for the
lower LATCH anchors.
Seats equipped with lower an~
chors are marked with a pair,
2, of LATCH symbols.
For vehicles equipped with a
middle seat:
It is not recommended to use
the inner lower anchors of
standard outer LATCH posi~
tions to fasten a child restraint
system on the middle seat. Use
the vehicle safety belt instead
for the middle seat.
Before
installing
LATCH
child
restraint
fixing
systems
Pull the safety belt away from the area of the child restraint system.
Assembly
of
LATCH
child
restraint
fixing
systems
1.Install child restraint system, see manufac~
turer's information.2.Ensure that both LATCH anchors are prop~
erly connected.
Child
restraint
systems
with
tether
strap
Safety
information WARNING
If the upper retaining strap is incorrectly
used for the child restraint system, the protec~ tive effect can be reduced. There is a risk of in~
jury. Make sure that the upper retaining strap is
not guided across sharp edges and without
twisting to the upper retaining strap. '

Attaching
the
upper
retaining
strap
to
the
anchor1.Raise the head restraint, if needed.2.On the rear seat: Guide the upper retaining
strap between the supports of the head re~ straint.3.Attach the hook of the retaining strap to
the anchor on the rear seat.4.Tighten the retaining strap by pulling it down.
Locking
the
doors
and
windows
Doors
Push the locking lever on the rear doors up.
The door can now be opened from the outside only.
Safety
switch
for
the
rear Press button on the driver's door ifchildren are being transported in the
rear.
This locks various functions so that they cannot
be operated from the rear: safety switch, refer
to page 68.
Seite 87Transporting
children
safelyCONTROLS87
Online Edition for Part no. 01402983567 - X/17

DrivingVehicle
features
and
op