2018 MINI Clubman Owner's Manual

Mobility
System
Concept With the Mobility System, minor tire damage
can be sealed temporarily to enable continued travel. To accomplish this, sealant is pumped
into the tires, which seals the damage from the
inside.
General
information'

'

5.With the compressor switched off, insertthe plug into the power socket inside the
vehicle.6.With the ignition switched on or the engine running, switch on the compressor.
Let the compressor run for max. 10 minutes to
fill the tire with sealant and achieve a tire infla~
tion pressure of approx. 2.5 bar.
While the tire is being filled with sealant, the tire inflation pressure may sporadically reach
approx. 5 bar. Do not switch off the compressor
at this point.
Checking
and
adjusting
the
tire
inflation
pressure
Checking
1.Switch off the compressor.2.Read the tire inflation pressure on the tire
pressure gage.
To continue the trip, a tire inflation pressure of at least 2 bar must be reached.
Removing
and
stowing
the
sealant container1.Unscrew the filling hose of the sealant con~
tainer from the tire valve.2.Press the red unlocking device.3.Remove the sealant container from the
compressor.4.Wrap and store the sealant container in
suitable material to avoid dirtying the cargo area.
Minimum
tire
inflation
pressure
is
not
reached
1.Pull the connector out of the power socket inside the vehicle.2.Drive 33 ft/10 m forward and back to dis~
tribute the sealant in the tire.3.Screw the connection hose of the compres~
sor directly onto the tire valve stem.4.Insert the connector into the power socket inside the vehicle.5.With the ignition switched on or the enginerunning, switch on the compressor.Seite 227Wheels
and
tiresMOBILITY227
Online Edition for Part no. 01402983278 - X/17

If a tire inflation pressure of at least 2 bar
cannot be reached, contact your dealer

cidents or risk of damage to property. Onlymount snow chains on tires that are designatedby their manufacturer as suitable for the use of
snow chains. '

WARNING
On soft, uneven or slippery ground, for
example snow, ice, tiles, etc., the vehicle jack can slip away. There is a risk of injury. If possi~
ble, change the wheel on a flat, solid, and slip-
resistant surface. '

'

do not change this position while using the ve~hicle jack. '