2018 MINI Clubman Owner's Manual

Display
Detailed
information
on
service
requirements
More information on the type of service re~
quired may be displayed on the Control Dis~
play.
Via the Central Information Display (CID):1. "My MINI"2."Vehicle status"3. "Service required"
Required maintenance procedures and le~ gally mandated inspections are displayed.4.Select an entry to call up detailed informa~
tion.
Symbols
SymbolsDescriptionNo service is currently required.The deadline for scheduled
maintenance or a legally man~
dated inspection is approach~
ing.The service deadline has al~
ready passed.
Entering
appointment
dates
Enter the dates for the mandatory vehicle in~
spections.
Make sure that the vehicle's date and time are
set correctly.
Via the Central Information Display (CID):
1. "My MINI"2."Vehicle status"3. "Service required"4."Vehicle inspection"5."Date:"6.Select the desired setting.7.Confirm.
The entered date is stored.
Gear
shift
indicator
Concept The system recommends the most fuel efficient
gear for the current driving situation.
General
information Depending on the vehicle's features and coun~
try-specific version, the gear shift indicator is active in the manual mode of the Steptronic
transmission and with manual transmission.
Suggestions to shift gear up or down are dis~
played in the instrument cluster.
Manual
transmission:
displaying
ExampleDescriptionFuel efficient gear is set.Shift into fuel efficient gear.
Steptronic
transmission:
displaying
ExampleDescriptionFuel efficient gear is set.Shift into fuel efficient gear.Seite 113DisplaysCONTROLS113
Online Edition for Part no. 01402983278 - X/17

Speed
Limit
Info
Speed
Limit
Info
Concept Speed Limit Info shows the current maximum
permitted speed in the instrument cluster.
General
information The camera at the base of the interior mirrordetects traffic signs at the edge of the road aswell as variable overhead sign posts. Traffic
signs with extra symbols for wet road condi~
tions, etc., are also detected and compared with the vehicle's onboard data, such as fromthe rain sensor, and will be displayed depend~ing on the situation.
With the navigation system, the system takes into account the information stored in the navi~
gation data and also displays speed limits
present on routes without signs.
Without a navigation system, the system is sub~
ject to limitations imposed by technology. Traf~
fic signs with speed limitations are detected
and displayed only. Speed limitations due to
entering or exiting towns, highway signs, etc.
are not displayed. Speed limits with extra text
characters are always displayed.
Safety
information WARNING
The system does not relieve from per~
sonal responsibility to assess visibility and traffic situation. There is a risk of an accident. Adjust
driving style to traffic conditions. Watch traffic
closely and actively intervene where appropri~ ate. '

With navigation system: SpeedLimit Info is not available.
Without navigation system: no
speed limit or cancellation is de~
tected.
Speed Limit Info can also be displayed in the
Head-up Display.
System
limits
The system may not be fully functional and
may provide incorrect information in the fol~
lowing situations:'

Calling
up
information
on
the
Info
Display
Press and hold button on signal lever.
Information is displayed in the Info Display of
the instrument cluster.
Information
at
a
glance
Info
Display Repeatedly pressing the buttonon the turn signal lever calls upthe following information in the
Info Display:
'

Resetting
average
values
Press and hold button on turn signal lever.Engine
temperature
display
Displays the current engine temperature, based
on a combination of coolant and engine oil
temperature. As soon as the optimum operat~ ing temperature has been attained, the indica~
tor is in the center position.
If the engine oil or coolant, and thus the en~
gine, become too hot, a Check Control message
is displayed too.
When the engine temperature is too
high, a red indicator light is displayed.
When the engine oil temperature is too high, a red indicator light is displayed.
Check the coolant level, refer to page 241.
With
equipment
version
with
Head-up
Display
and
navigation:
distance
to
destination
The distance remaining to the destination is
displayed if a destination is entered in the navi~ gation system before the trip is started.
The distance to the destination is adopted au~ tomatically.
With
equipment
version
with
Head-up
Display
and
navigation:
time
of
arrival
The estimated time of arrival is displayed if adestination is entered in the navigation systembefore the trip is started.
The time must be correctly set.
Speed
Limit
Info Speed Limit Info shows the current maximum
permitted speed in the instrument cluster.
Onboard
Computer
on
the
Control Display
Concept The Onboard Computer displays different vehi~
cle data on the Control Display, such as average values.
General
information
Two types of Onboard Computers are available on the Control Display:'

Resetting
the
trip
computerVia the Central Information Display (CID):1. "My MINI"2."Driving information"3."Trip computer"4.Move the Controller to the left, if needed.'

3."Speed warning"4."Warning at:"5.Turn the Controller until the desired speedis displayed.6.Press the Controller.
Activating/deactivating
the
speed
warning
Via the Central Information Display (CID):
1. "My MINI"2."Vehicle settings"3."Speed warning"4."Speed warning"5.Press the Controller.
Setting
your
current
speed
as
the
speed
warning
Via the Central Information Display (CID):
1. "My MINI"2."Vehicle settings"3."Speed warning"4."Select current speed"5.Press the Controller.
LED
ring
on
the
central
instrument
cluster
Concept
The LED ring displays light animations to repre~
sent specific functions.
Basic
displays Basic functions, for instance the tachometer,
can be set to be displayed continually if so de~ sired.
Event
displays
Functions that are only displayed temporarily,
for instance the volume or temperature set~
tings, can be set as event displays.
Several vehicle assistance functions can also be
displayed on the LED ring. This display corre~
sponds with the displays of the function in the
respective display.
Example:
tachometer
Like the tachometer in the instrument cluster, the light animations of the tachometer's basic
display show the current RPMs and the respec~
tive RPM warning thresholds.
Display'

3."Displays"4."Center Instrument"5."Basic display" or "Event display"6.Select the desired setting.
Setting
the
brightnessThe brightness can be adjusted when night
lighting is active in the instrument cluster.
Via the Central Information Display (CID):
1. "My MINI"2."System settings"3."Displays"4."Center Instrument"5."Brightness at night"6.Turn the Controller until the desired bright~ ness is set.7.Press the Controller.
The setting is stored for the driver profile cur~rently used.
Head-up
Display
Concept This system projects important information into
the driver's field of vision, for instance the speed.
The driver can get information without averting his or her eyes from the road.
General
information
Follow the instructions for cleaning the Head-
up Display. For additional information, see the
chapter on care.
Safety
information WARNING
When extending and retracting the pro~
jection screen of the Head-up Display, body parts can be jammed. There is a risk of injury.
Make sure that the area of movement of theprojection screen is clear during opening and
closing. '