2018 MERCEDES-BENZ G-CLASS warning light

[x] Cancel search: warning light

Page 125 of 294

MERCEDES-BENZ G-CLASS 2018  Owners Manual To ensure that the vehicle is safeguarded
against rolling away unintentionally:
Rthe parking brake must be applied.
Rthe transmission must be in positionPand the
SmartKey must be removed from the igni

Page 126 of 294

MERCEDES-BENZ G-CLASS 2018  Owners Manual XTo apply:pull parking brake lever ;up
firmly.
When the ignition is switched on, the F
(USA only) or J(Canada only) indicator
lamp in the instrument cluster lights up.
XTo release: pull parking brake

Page 128 of 294

MERCEDES-BENZ G-CLASS 2018  Owners Manual This also applies if cruise control or DISTRONIC
PLUS is activated.
Heavy and light loads
GWARNING
If you rest your foot on the brake pedal while
driving, the braking system can overheat. This increas

Page 132 of 294

MERCEDES-BENZ G-CLASS 2018  Owners Manual General notes
HEnvironmental note
Protection of the environment is of primary
importance. Treat nature with respect.
Observe all prohibiting signs.
Read this section carefully before driving your
vehi

Page 134 of 294

MERCEDES-BENZ G-CLASS 2018  Owners Manual keep a safe distance from the vehicle when
doing so in order to avoid injury as a result of
unexpected vehicle movements. After driving
off-road or over obstacles, check the vehicle
for possible damag

Page 137 of 294

MERCEDES-BENZ G-CLASS 2018  Owners Manual load on the brake system and prevents the
brakes from overheating and wearing too
quickly.
If DISTRONIC PLUS detects a critical risk of col-
lision with the vehicle in front, you will be warned
visual

Page 142 of 294

MERCEDES-BENZ G-CLASS 2018  Owners Manual DISTRONIC PLUS is automatically deactivated
if:
Ryou apply the parking brake
Ryou are driving slower than 15 mph (25 km/h)
and there is no vehicle in front, or if the vehicle
in front is no longer det

Page 143 of 294

MERCEDES-BENZ G-CLASS 2018  Owners Manual Radar sensors
The radar sensors for Blind Spot Assist are inte-
grated into the rear bumper. Make sure that thebumpers are free from dirt, ice or slush. The
sensors must not be covered, for example by