00BBPlacethe mobile phone as close tothe cen‐
te r of mat 1as possible with the display
fa cing up wards.
When thech arging symbol is shown in the
multimedia sy stem, the mobile phone is
being charge d.
Malfunctions during thech arging process are
shown in the multimedia sy stem displa y.
00CE The mat can be remo vedfo r cleaning, e.g.
using clean, luk ewarmwate r.
Installing or removing the floor mats
0071
WARNING Risk of accident due to
objects in the driver's foot we ll
Objects in the driver's foot we ll may impede
pedal tr avel or block a depressed pedal.
This jeopardizes the operating and road
saf etyof theve hicle.
00BBStow all objects in theve hicle securely
so that they cannot getinto the driver's
fo ot we ll.
00BBAlw ays ins tallth efloor mats securely
and as prescribed in order toensure
th at there is alw ays suf ficient room for
th e pedals.
00BBDo not use loose floor mats and do not
place floor mats on top of one ano ther.00BBTo install: pressstud 1 into holder 2.
00BBToremo ve:pull thefloor mat off the holders
2.
11 0
Seats and stowing
High beam switches off automatically:
RAt speeds below 16mp h (25 km/h).
RIfot her road users are de tected.
RIfstre et lighting is suf ficient.
At speeds abo veappr ox.31 mp h (50 km/h):
RThe headlamp range of low beam is regulated
automatically based on the dis tance to ot her
ro ad users.
The sy stem's optical sensor is located behind
th e windshield near theove rhead control panel.
Switching Adaptive Highbeam Assist on/off
00BBTo switch on: turnthe light switch to
th e0058 position.
00BBSwitch on the high beam using the combina‐
tion switch.
When the high beam is switched on automat‐
ically in the dar k,the00CE indicator lamp in
th e multifunction display comes on.
00BBTo switch off: switch offthe high beam
using the combination switch.
Switching the daytime running lights on/off
Multimedia sy stem:
0086 9 H K L F O H00CF÷ / L J K W 6 H W W L Q J V00CF ' D \
W L P H 5 X Q / L J K W V
00BBAc tivate 0073or deacti vate 0053 the function.
Setting theex terior lighting switch-off delay
time
Multimedia sy stem:
0086 9 H K L F O H00CF÷ / L J K W 6 H W W L Q J V00CF ( [ W
/ L J K W ' H O 6 Z R I I
00BBSet the switch-off delay time.
Setting the sur round lighting
Multimedia sy stem:
0086 9 H K L F O H00CF÷ / L J K W 6 H W W L Q J V00CF / R F D
W R U / L J K W L Q J
00BBSwitch the function on 0073or off 0053.
If th e sur round lighting is switched on, theex te‐
ri or lighting remains lit for 40 seconds af terth e ve
hicle is unloc ked. When youstart theve hicle,
th e sur round lighting is switched off and auto‐
matic driving lights are activated.
Interior lighting
Ad justing the in terior lighting
00BB1 0042 Switches there ar interior lighting
on/off
00BB2 003D Switches the front right-hand read‐
ing lamp on/off
00BB3 0033 Switches the automatic interior
lighting control on/off
Light and visibility 11
5
00BBHoldthe wiper arm with one hand. With th e
ot her hand, turn the wiper blade in the direc‐
tion of ar row1away from the wiper arm to
th estop.
00BBSlide catch 2inthe direction of ar row 3
until it engages in there mo val position.
00BBRe mo vethe wiper blade in the direction of
ar row 4away from the wiper arm. Fi
tting the wiper blades
00BBInsert the new wiper blade into the wiper
arm in the direction of ar row1.
00BBSlide catch 2inthe direction of ar row 3
until it engages in the locking position.
00BBMake sure that the wiper blade sits cor rectly.
00BBFo ldthe wiper arms back onto the wind‐
shield. Maintenance display
The maintenance display is only
available for
st andard windshield wipers.
00BBRe mo veprotective film 1 ofthe mainte‐
nance display on the tip of the newly ins tal‐
led wiper blades.
11 8
Light and visibility
Ifth e color of the maintenance display changes
from black to yellow, the wiper blades should be
re placed.
00CE The duration of the color change varies
depending on the usage conditions.
Re placing the windshield wiper blades
(MAGIC VISION CONTROL)
0071 WARNING Risk of becoming trapped if
th e windshield wipers are switched on
while wiper blades are being replaced
If th e windshield wipers begin tomo vewhile
yo u are changing the wiper blades, you can
be trapped bythe wiper arm.
00BBAlw ays switch off the windshield wipers
and the ignition before changing the
wiper blades.
Moving the wiper arms toave rtical position
00BBSwit chon the po wer supp ly.
00BBSet the windshield wiper tothe00AA slow
continuous wiping position on the combina‐
tion switch.
00BBAs soon as the wiper arms are vertical rela‐
tive tothe hood, switch off the po wer supply.
Re moving the wiper blades
00BBTo bring the wiper blade into position to
be remo ved: raise the wiper arm away from
the windshield and hold it with one hand.
Wi th th eot her hand, turn the wiper blade in
th e direction of ar row1beyond the point of
re sis tance.
The wiper blade engages in there mo val posi‐
tion with a clic k.
00BBToremo vethe wiper blade: pressrelease
knob 2, pull the wiper blade in the direction
of ar row3and remo ve.
Light and visibility 11
9
90072Switches ai r-re circulation mode on/off
(→page 127)
A008F Setsthe front passenger side air distri‐
bution
B0082 Setsthe front passenger side temp era‐
ture
Re ar operating unit
Yo u can set thete mp erature forth e entire rear
compartment using buttons 1or3.
1Sets thete mp erature
2Display
3Sets thete mp erature
Operating the clima tecontro l system
Ac tivating/deactivating climate control
00BBTo activate: setthe air flow toleve l 1 or
higher using the002D button.
00BBTodeactivate: setthe air flow toleve l 0
using the002D button.
00CE If climate control is deactivated, the win‐
do ws can fog up more quickl y.Deactivate
climate control only brie fly.
Ac tivating/deactivating the A/C function via
the control panel
The A/C function cools, heats and dehumidifies
th e interior air in theve hicle.
00BBPress the005A button.
Deactivate the A/C function only briefly other‐
wise the windo wscan fog up more quickl y.
Condensation may dr ipfrom the underside of
th eve hicle when cooling mode is active. This is
not a sign that there is a malfunction.
Ac tivating/deactivating the A/C function
using the multimedia sy stem
Multimedia sy stem:
0086 9 H K L F O H00CFb &