Theexterior lighting (e xcept parking and stand‐
ing lights) switch es off automatically when the
driver's door is opened.
RObser vethe no tes on sur round lighting
(→page 115).
Au tomatic driving lights function
The pa rking lights, low beam and daytime run‐
ning lights are switched on au tomatically
depending on the ignition status, whe ther the
engine is running and the light conditions.
0071
WARNING Risk of accident when the low
beam is switched off in poor visibility
When the light switch is set to0058, the low
beam may not be switched on automatically
if th ere is fog, snow or other causes of poor
visibility such as spr ay.
00BBIn such cases, turn the light switch to
0058.
The automatic driving lights are only an aid. You
are responsible forve hicle lighting. Ac
tivating/deactivating the rear fog light
Re quirements
RThe light switch is in the 0058 or0058 posi‐
tion.
00BBPress the 005E button.
Please obser vethe count ry-specific la wsonthe
use of rear fog lights.
Operating the lights combination switch
1High-beam headlamps
2Turn signal light, right
3High-beam flasher
4Tu rn signal light, left
00BBUse the combination switch toactivate the
function in question.
112
Light and visibility
High-beam headlamps
00BBToswitch on: turnthe light switch tothe
0058 or0058 position.
00BBPress the combination switch be yond the
pressure point in the direction of ar row1.
When the high beam is activated, the0058
indicator lamp for low beam is deactivated
and replaced bythe0057 indicator lamp for
th e high beam.
00BBTo switch off: movethe combination switch
back toits starting position.
Headla mpflasher:
00BBPull the combination switch in the direction
of ar row3.
Tu rn signals
00BBTo indicate briefl y:press the combination
switch briefly up tothe pressure point in the
direction of ar row2or4.
The cor responding turn signal light flashes
th re e times.
00BBTo indicate permanentl y:press the combi‐
nation switch be yond the pressure point in
th e direction of ar row2or4.
Ac tivating/deactivating the hazard warning
light
00BBPress button 1.
Cornering light
Cornering light function
The cornering light impr ovesth e illumination of
th e car riag ewa yove r a wide angle in the turning
direction, enabling better visibility on tight
bends, forex ample. It can be activated only
when the low beam is switched on.
The function is active:
RAt speeds below 25 mph (40 km/h) when
th e turn signal light is switched on or the
st eering wheel is turned.
Light and visibility 11
3
High beam switches off automatically:
RAt speeds below 16mp h (25 km/h).
RIfot her road users are de tected.
RIfstre et lighting is suf ficient.
At speeds abo veappr ox.31 mp h (50 km/h):
RThe headlamp range of low beam is regulated
automatically based on the dis tance to ot her
ro ad users.
The sy stem's optical sensor is located behind
th e windshield near theove rhead control panel.
Switching Adaptive Highbeam Assist on/off
00BBTo switch on: turnthe light switch to
th e0058 position.
00BBSwitch on the high beam using the combina‐
tion switch.
When the high beam is switched on automat‐
ically in the dar k,the00CE indicator lamp in
th e multifunction display comes on.
00BBTo switch off: switch offthe high beam
using the combination switch.
Switching the daytime running lights on/off
Multimedia sy stem:
0086 9 H K L F O H00CF÷ / L J K W 6 H W W L Q J V00CF ' D \
W L P H 5 X Q / L J K W V
00BBAc tivate 0073or deacti vate 0053 the function.
Setting theex terior lighting switch-off delay
time
Multimedia sy stem:
0086 9 H K L F O H00CF÷ / L J K W 6 H W W L Q J V00CF ( [ W
/ L J K W ' H O 6 Z R I I
00BBSet the switch-off delay time.
Setting the sur round lighting
Multimedia sy stem:
0086 9 H K L F O H00CF÷ / L J K W 6 H W W L Q J V00CF / R F D
W R U / L J K W L Q J
00BBSwitch the function on 0073or off 0053.
If th e sur round lighting is switched on, theex te‐
ri or lighting remains lit for 40 seconds af terth e ve
hicle is unloc ked. When youstart theve hicle,
th e sur round lighting is switched off and auto‐
matic driving lights are activated.
Interior lighting
Ad justing the in terior lighting
00BB1 0042 Switches there ar interior lighting
on/off
00BB2 003D Switches the front right-hand read‐
ing lamp on/off
00BB3 0033 Switches the automatic interior
lighting control on/off
Light and visibility 11
5
Folding the outside mir rors in/out
00BBBrief lypress switch 1.
00CE Ifth e battery has been disconnected or com‐
ple tely discharged ,th e outside mir rors must
be reset. Only then will the automatic mir ror
fo lding function workproperly. Ad
justing the outside mir rors
00BBPress the3 or4 buttons toselect the out‐
side mir rorto be set.
00BBPress the2 button toset the position of the
mir rorgl ass.
Engaging the outside mir rors
00BBPress and hold button 1.
Yo uwill hear a click and the mir ror audibly
engage in position. The outside mir ror is set
in the cor rect position.
Au tomatic anti-glare mir rorsfunction
0071
WARNING Risk of burn s and poisoning
due tothe anti- glare mir ror electrolyte
Electrolyte may escape if theglass in an
automatic anti-glare mir ror breaks.
The electrolyte is harmful and causes ir rita ‐
tion. It must not come into contact wi thyour
skin, eyes,respiratory organs or clo thing or
be swallo wed.
00BBIfyo u come into contact with electro‐
ly te , obser vethefo llowing:
RRinse the electrolyte from your skin
and seek medical attention immedi‐
atel y.
RIf electrolyte comes into contact
with your eyes, rinse them thor‐
oughly with clean water and seek
medical attention immediately.
RIf th e electrolyte is swallo wed,
immediately rinse your mouth out
th oroughly. Do not induce vomiting.
Seek medical attention immediately.
RImmediate lych ange out of clo thing
which has come into con tact wi th
electrolyte.
RIf an allergic reaction occurs, seek
medical attention immediatel y.
The insiderearview mir ror and the outside mir‐
ro r on the driver's side automatically go into
anti- glare mode if light from a headlamp hits the
inside rearview mir ror.
Light and visibility 12
1