2018 Lexus LC500 oil temperature

83
2
-$@-$I@0.@0.&@ &&

2-1. Instrument cluster
Vehicle status information and indicators
Warning lights inform the driver of mal-
functions in the indicated vehicle sys-
tems.
*1: These lights turn on when the engine
switch is turned to
IGNITION ON mode to
indicate that a system check is being
performed. They will turn off after the
engine is started, or
after a few seconds. There may be a
malfunction in a syst em if a light does
not come on, or turn off. Have the vehi-
cle inspected by any authorized Lexus
retailer or Lexus authorized repairer, or
any reliable repairer.
*2: This light illuminates on the multi-infor-
mation display.
*3: The light flashes to indicate a malfunc-
tion.
*4: This light illuminates on the center
Warning lights
(red)
Brake system warning light*1
( P.368)
Charging system warning
light*2 ( P.368)
Low engine oil pressure
warning light*2 ( P.368)
Malfunction indicator lamp*1
( P.369)
SRS warning light*1
( P.369)
ABS warning light*1
( P.369)
(red)
Electric power steering sys-
tem warning light*1 ( P.370)
(yellow)
Electric power steering sys-
tem warning light*1 ( P.370)
PCS warning light*1, 3
( P.370)
(orange)
LKA indicator*2 (P.371)
Slip indicator*1 ( P.371)
Brake Override System
warning light*2
( P.372)/Drive-Start Con-
trol warning light*2 ( P.372)
Brake hold operated indica-
tor*1, 3 ( P.372)
Parking brake indicator*3
(P.372)
Brake pad wear warning
light*2 ( P.373)
(yellow)
Brake system warning light*1
(P.373)
Low fuel level warning light
( P.373)
Driver’s and front passen-
ger’s seat belt reminder light
( P.373)
Rear passengers’ seat belt
reminder lights*4 ( P.374)
Master warning light*1
( P.374)
Tire pressure warning light*1, 3
( P.374)
High coolant temperature
warning light*2 ( P.375)

88
-$@-$I@0.@0.&@ &&

2-1. Instrument cluster
LC500
LC500h
The units used on the meters may differ depending on the target region.
Engine oil temperature gauge/Eco Driving Indicator (LC500)
Displays the engine oil temperature or Eco Driving Indicator (P.86)
Gauges and meters
When the main meter is in the side position, some of the meter displays and the
gauge layout will be changed.
Meter display
A

91
2
-$@-$I@0.@0.&@ &&

2-1. Instrument cluster
Vehicle status information and indicators
■Liquid crystal display
Small spots or light spots may appear on the
display. This phenomen on is characteristic of liquid crystal displays, and there is no problem continuing to use the display.
■Customization
The meter display can be customized on the multi-information display. ( P.423)
The odometer and trip meter displays
can be switched. When the trip meter
is displayed, pressing and holding the
button will reset the trip meter.
The brightness of the instrument panel
lights can be adjusted.
1 Darker
2 Brighter
■Instrument panel brightness adjustment
The instrument panel brightness levels when the tail lights are on and off can be adjusted individually. However, when the
surroundings are bright (daytime, etc.), turning on the tail lights will not change the instrument panel brightness.
The display can be switched between
the center and side positions.
NOTICE
■To prevent damage to the engine and its components
●Do not let the indicator of the tachom-eter enter the red zone, as it rep-
resents the engine speed range which exceeds the maximum safe engine speed.
●In the following situations, the engine
may be overheating. In this case, immediately stop the vehicle in a safe place, and check the engine after it has
cooled completely. ( P.400, 403)
• The engine coolant temperature gauge is in the red zone (H).
• LC500: The engine oil temperature gauge is in the red zone (H).
Changing between the odome-
ter and trip meter
Changing the instrument panel
light brightness
Changing the display

94
-$@-$I@0.@0.&@ &&

2-1. Instrument cluster
■Content of drive information
Select to display various drive data.
Up to 2 of the following items can be
selected.
Items displayed can be switched by
pressing or of the meter con-
trol switches to select and pressing
or .
 Current fuel consumption*1
Displays the current rate of fuel consump-
tion
 Average fuel economy (after
reset*2/after start/after refuel)*1
Displays the average fuel consumption
since the function was reset, the engine
was started, and the vehi-
cle was refueled, respectively
Use the displayed average fuel consump-
tion as a reference.
 Average speed (after reset*2/after
start)*1
Displays the average vehicle speed since
the function was reset and the engine
was started, respectively
 Elapsed time (after reset*2/after
start)*1
Displays the elapsed time since the func-
tion was reset and the engine tem> was started, respectively
 Distance (range/after start)*1
Displays the estimated maximum distance
that can be driven with the quantity of fuel
remaining and the distance driven after the
engine was started
respectively.
• This distance is computed based on your
average fuel consumption. As a result,
the actual distance that can be driven
may differ from that displayed.
• When only a small amount of fuel is
added to the tank, the display may not be
updated.
When refueling, turn the engine switch
off. If the vehicle is refu-
eled without turning the engine switch
off, the display may not
be updated.
*1: Displayed when the item is set in “Drive
Info 1” and “Drive Info 2”.
*2: The function can be reset by pressing
“OK” of the meter control switches for
longer than 1 second when the item to
reset is displayed.
If there is more than one item that can
be reset, the item selection screen will
appear.
■Eco Driving Indicator/engine oil
temperature gauge (LC500)
 P.86, 88
■Hybrid System Indicator/motor
power display (LC500h)
 P.86
■Energy monitor (LC500h)
 P.104
■Tire pressure
 P.329
■Gear positions
Displays the current shift range or gear
position when the shift position is in D
Drive information

269
4
-$@-$I@0.@0.&@ &&

4-6. Driving tips
Driving
Use fluids that are appropriate to
the prevailing outside temperatures.
•Engine oil
•Engine coolant
• Power control unit coolant (LC500h)
•Washer fluid
 Have a service technician inspect
the condition of the 12-volt battery.
 Have the vehicle fitted with four
snow tires.
Ensure that all tires are the specified size
and the same brand.
 Tire chains can only be installed on
the rear tires. However, tire chains
cannot be installed on 275/35RF21
or 275/40RF20 rear tires.
Before installing tire ch ains, change all four
tires and wheels to those of the specified
size for use with tire chains (front tires:
245/45RF20, rear tires: 245/45RF20,
wheels: 20 x 8 1/2 J 25 inset). Use the
specified type of tire chains and install
them on the rear tires only.
For details, contact any authorized Lexus
retailer or Lexus authorized repairer, or
any reliable repairer.
Winter driving tips
Carry out the necessary prepara-
tions and inspections before driving
the vehicle in winter. Always drive
the vehicle in a manner appropriate
to the prevailing weather condi-
tions.
Preparation for winter
WARNING
■Driving with snow tires
Observe the following precautions to
reduce the risk of accidents.
Failure to do so may result in a loss of
vehicle control and cause death or seri- ous injury.
●Use tires of the specified size.
●Maintain the recommended level of air pressure.
●Do not drive at speeds in excess of the
speed limit or the speed limit specified for the snow tires being used.
●Use snow tires on all, not just some wheels.
■Driving with tire chains
Observe the following precautions to reduce the risk of accidents.
Failure to do so may result in the vehicle being unable to be driven safely, and may
cause death or serious injury.
●Do not drive in excess of the speed limit specified for the tire chains being used, or 50 km/h (30 mph), which-
ever is lower.
●Avoid driving on bumpy road surfaces or over potholes.
●Avoid sudden acceleration, abrupt steering, sudden braking and shifting
operations that cause sudden engine braking.
●Slow down sufficiently before entering a curve to ensure that vehicle control is
maintained.
●Do not use LKA (Lane-Keeping Assist) system. (if equipped)

315
6
-$@-$I@0.@0.&@ &&

6-3. Do-it-yourself maintenance
Maintenance and care
WARNING
The engine compartment contains many mechanisms and fluids that may move suddenly, become hot, or become elec-
trically energized. To avoid death or seri- ous injury, observe the following precautions.
■When working on the engine com-
partment
●LC500h: Make sure that the “IGNI-
TION ON” on the multi-information display and the “READY” indicator are both off.
●Keep hands, clothing and tools away
from the moving fan and engine drive belt.
●LC500: Be careful not to touch the engine, radiator, exhaust manifold, etc.
right after driving as they may be hot. Oil and other fluids may also be hot.LC500h: Be careful not to touch the
engine, power control unit, radiator, exhaust manifold, etc. right after driv-ing as they may be hot. Oil and other
fluids may also be hot.
●Do not leave anything that may burn easily, such as paper and rags, in the engine compartment.
●Do not smoke, cause sparks or expose
an open flame to fuel. Fuel fumes are flammable.
●Take care because brake fluid can harm your hands or eyes and damage
painted surfaces. If fluid gets on your hands or in your eyes, flush the affected area with clean water imme-
diately. If you still experience discomfort, con-sult a doctor.
■When working near the electric cool-ing fan or radiator grille
Be sure the engine switch is off.
With the engine switch in IGNITION ON mode , the electric cooling fan may automatically
start to run if the air conditioning is on and/or the coolant temperature is high. ( P.323)
■Safety glasses
Wear safety glasses to prevent flying or falling material, fluid spray, etc. from get-
ting in your eyes.
NOTICE
■If you remove the air cleaner filter
Driving with the air cleaner filter
removed may cause excessive engine wear due to dirt in the air.
■If the fluid level is low or high
It is normal for the brake fluid level to go down slightly as the brake pads wear or when the fluid level in the accumulator is
high. If the reservoir needs frequent refilling, it may indicate a serious problem.

413
8
-$@-$I@0.@0.&@ &&

8-1. Specifications
Vehicle specifications
LC500
■Oil capacity (Drain and refill [Ref-
erence*])
*: The engine oil capacity is a reference
quantity to be used when changing the
engine oil. Warm up and turn off the
engine, wait more than 5 minutes, and
check the oil level on the dipstick.
■Engine oil selection
“Toyota Genuine Motor Oil” is used in
your Lexus vehicle. Lexus recom-
mends the use of approved “Toyota
Genuine Motor Oil”. Another motor
oil of matching quality can also be
used.
Oil grade:
5W-30 and 10W-30:
API grade SL “Energy-Conserving”,
SM “Energy-Conserving” or SN
“Resource-Conserving”; or ILSAC
multigrade engine oil
15W-40:
API grade SL, SM or SN multigrade
engine oil
Recommended viscosity (SAE):
SAE 5W-30 is filled into your Lexus
vehicle at manufacturing, and the best
choice for good fuel economy and
good starting in cold weather.
If you use SAE 10W-30 or a higher vis-
cosity engine oil in extremely low tem-
peratures, the engine may become
difficult to start, so SAE 5W-30 engine
oil is recommended.
Temperature range anticipated
before next oil change.
Preferred
Oil viscosity (5W-30 is explained here
as an example):
• The 5W in 5W-30 indicates the
characteristic of the oil which allows
cold startability. Oils with a lower
value before the W allow for easier
starting of the engine in cold
weather.
• The 30 in 5W-30 indicates the vis-
cosity characteristic of the oil when
the oil is at high temperature. An oil
with a higher viscosity (one with a
Capacity3.6 Ah
Quantity84 cells
Overall voltage310.8 V
Lubrication system
With filter8.6 L (9.1 qt., 7.6 Imp.qt.)
Without filter7.9 L (8.4 qt., 7.0 Imp.qt.)
A
B

415
8
-$@-$I@0.@0.&@ &&

8-1. Specifications
Vehicle specifications
Temperature range anticipated
before next oil change.
Preferred
Oil viscosity (0W-20 is explained here
as an example):
• The 0W in 0W-20 indicates the
characteristic of the oil which allows
cold startability. Oils with a lower
value before the W allow for easier
starting of the engine in cold
weather.
• The 20 in 0W-20 indicates the vis-
cosity characteristic of the oil when
the oil is at high temperature. An oil
with a higher viscosity (one with a
higher value) may be better suited if
the vehicle is operated at high
speeds, or under extreme load con-
ditions.
How to read oil container labels:
Either or both API registered marks
are added to some oil containers to
help you select the oil you should use.
API Service Symbol
Top portion: “API SERVICE SN” means the
oil quality designation by American Petro-
leum Institute (API).
Center portion: “SAE 0W-20” means the
SAE viscosity grade.
Lower portion: “Resource-Conserving”
means that the oil has fuel-saving and envi-
ronmental protection capabilities.
ILSAC Certification Mark
The International Lubricant Specification
Advisory Committee (ILSAC) Certifica-
tion Mark is displayed on the front of the
container.
A
B
A
B