2018 Lexus LC500 phone

76
-$@-$I@/BWJ@0.&@ &&

3-1. Basic operation
Select to call the registered phone
number. ( P.196)
Select to register the point in the
favourites list. ( P.101)
Select to display the starting route
guidance screen. ( P.90)
Traffic message icons on the map
Traffic message list
B
C
D
Traffic messages
Traffic messages such as traffic con-
gestion, accidents and road clo-
sures are displayed on the map or
the list. Traffic data can be received
via radio broadcast or internet.
Traffic messages screen

80
-$@-$I@/BWJ@0.&@ &&

3-2. Destination search
2Select the country flag icon.
3 Enter a desired country name.
4 Select the desired country when
displayed the candidate country
name.
If the result is a contact, street address,
favourite or recent destination, the cor-
responding details screen is shown.
All details screens have “Go” button
which starts route calculation and
shows the route calculation screen.
• If a destination has already been set,
“Replace”, “Add” and “Cancel” will
be displayed.
“Replace”: Select to delete the existing
destination(s) and set a new one.
“Add”: Select to add a destination.
“Cancel”: Select to return to the current
destination.
1 Select the desired .
2 Check that the detailed POI infor-
mation is displayed.
■If the result is a contact, favourite,
recent destination or POI
Select to display the Street View.
Select to call the phone number.
• If no Bluetooth® phone is available, this
button is greyed out.
Select to register the entry in the
favourites list.
Select to display the starting route
guidance screen. ( P.90)
Viewing detail screen
A
B
C
D

84
-$@-$I@/BWJ@0.&@ &&

3-2. Destination search
3Select the desired entry.
 Select to display and edit the
entry information. ( 103)
 Select to register the entry in
the favourites list.
●The list can contain a maximum of 100
entries. When the maximum is reached, the oldest destination is deleted.
The “Other” ( ) submenu button
allows a destination to be input in four
different ways:
 Address from the onboard naviga-
tion database
 POI (onboard POI database and
online POI search)
 Phonebook contacts
 Geo coordinates
1 Press the “MAP” button on the
Remote Touch.
2 Select “Other”.
3 Enter the desired search method.
Select to search for a destination by
address. ( P.84)
Select to search for a destination by
point of interest. ( P.85)
Select to search for a destination by
phonebook. ( P.88)
Select to search for a destination by
geo coordinates. ( P.88)
1 Press the “MAP” button on the
Remote Touch.
2 Select “Other”.
3 Select “Address”.
4 Select “Country” to enter the
desired country.
5 Select “Street” to enter the street
name.
Searching from other method
Searching by address
A
B
C
D

86
-$@-$I@/BWJ@0.&@ &&

3-2. Destination search
6Select “Go”.
Select to display the Street View.
( P.224)
Select to call the phone number.
• If no Bluetooth® phone is available, this
button is greyed out.
Select to register the entry in the
favourites list. ( P.101)
• If a destination has already been set,
“Replace”, “Add” and “Cancel” will be
displayed.
“Replace”: Select to delete the existing
destination(s) and set a new one.
“Add”: Select to add a destination.
“Cancel”: Select to return to the current
destination.
1 Select “Nearby”, “At destination”,
“Along route”, “In a town” or “Select
on map” on the POI screen.
 The text on this button is always
showing the current search criteria.
2 Select the desired search method.
Select to set the search around the
current position.
Select to set the search around the
destination.
Select to set the search around the
current route.
Select to set the search around the
desired town.
Select to set the point from the
map.
3 If map screen is available, select the
desired point on the map.
4 Enter the POI name and select
“Search” or the list button.
5 Check that the search results are
displayed. Select the desired POI.
6 Select “Go”.
Setting the search area
A
B
C
A
B
C
D
E

87
3
-$@-$I@/BWJ@0.&@ &&

3-2. Destination search
Navigation system
1Select “By category” on the POI
screen.
2 Select the desired category and
subcategories.
“Select all categories”: Select to display all
POI categories.
3 Select the desired POI.
4 Select “Go”.
1 Select “History” on the POI screen.
2 Select the desired previous search
word.
: Select to delete the search word.
3 Select “Search”.
4 Check that the search results are
displayed. Select the desired POI.
5 Select “Go”.
When the online search results is dis-
play, the pictures on the details screen
is displayed.
1 Select the desired POI.
2 Check that the detailed POI infor-
mation is displayed. Then select
“Details”.
Select to display the Street View.
Select to call the phone number.
• If no Bluetooth® phone is available, this
Searching by category
Entering keywords from the history
list
Display the online POI details
A
B

88
-$@-$I@/BWJ@0.&@ &&

3-2. Destination search
button is greyed out.
Select to display the starting route
guidance screen. ( P.90)
3 Select .
■Pictures
Selecting the Pictures button displays
up to 6 pictures as thumbnails in the
screen. Selecting a thumbnail will
enlarge the picture.
1 Select .
2 Select the desired thumbnail.
 The previous/next buttons are only
shown if there is more than one pic-
ture available. If a picture can’t be
shown as enlarged, a message
“Images are not available.” will be
displayed.
Before using this function, it is neces-
sary to connect a Bluetooth® phone.
If a contact does not have address
information stored, the entry will be
dimmed.
1 Press the “MAP” button on the
Remote Touch.
2 Select “Other”.
3 Select “Phonebook”.
4 Select the desired entry.
 Select to display the details
screen. ( P.80)
Geo coordinates can be entered in
DMS format (Degrees°, Minutes’, Sec-
onds”) and Decimal. Only coordinate
values that can potentially exist are
able to be entered. Impossible coordi-
nate values and their relevant screen
buttons will be dimmed.
1 Press the “MAP” button on the
Remote Touch.
2 Select “Other”.
3 Select “Geo coordinates”.
4 Select “Degrees” or “Decimal”.
5 Enter the latitude and longitude.
6 Select “OK”.
Searching by phonebook
C
Searching by coordinates

138
-$@-$I@/BWJ@0.&@ &&

4-3. Media operation
The track currently being listened to
can be repeated.
1 Select .
●Each time is selected, the mode
changes as follows:
When shuffle is off (iPhone 5 or later) • file/track repeat  folder/album repeat
 off
When shuffle is off (iPhone 4s or earlier)
• file/track repeat  off
When shuffle is on
• file/track repeat  off
It depends on the models.
Tracks or albums can be automatically
and randomly selected.
1 Select .
●Each time is selected, the mode
changes as follows:
• track shuffle  album shuffle  off
It depends on the models.
Turn to select a track.
Turn and hold to fast for-
ward/rewind.
Turn to select a track.
Turn to move up/down the list.
●When an iPod is connected using a genu- ine iPod cable, the iPod starts charging its battery.
●Depending on the iPod and the songs in the iPod, iPod cover art may be displayed.
This function can be changed to “On” or “Off”. ( P.148) It may take time to dis- play iPod cover art, and the iPod may not
be operated while the cover art display is in process.
●When an iPod is connected and the audio source is changed to iPod mode, the iPod
will resume playing from the same point it was last used.
●Depending on the iPod that is connected to the system, certain functions may not be available.
●The system may not function properly if a conversion adapter is used to connect a
device.
Repeating
Random order
Audio control switch
WARNING
●Do not operate the player’s controls or connect the iPod while driving.
NOTICE
●Depending on the size and shape of
the iPod that is connected to the sys- tem, the console box may not close fully. In this case, do not forcibly close
the console box as this may damage the iPod or the terminal, etc.
●Do not leave your portable player in the car. In particular, high tempera-
tures inside the vehicle may damage the portable player.
A
B

140
-$@-$I@/BWJ@0.&@ &&

4-3. Media operation
Displays cover art
Select to set repeat playback.
( P.140)
Select to select a track.
Select and hold to fast rewind.
Select to play/pause.
Select to select a track.
Select and hold to fast forward.
Select to set random playback.
( P.140)
The track or album currently being lis-
tened to can be repeated.
1 Select .
●Each time is selected, the mode
changes as follows:
• track repeat  album repeat  off
Tracks or albums can be automatically
and randomly selected.
1 Select .
●Each time is selected, the mode
changes as follows:
•album random  all track random  off
Turn to select a track.
Turn and hold to fast for-
ward/rewind.
Turn to select a track.
Turn to move up/down the list.
●Depending on the Bluetooth® device that is connected to the system, the music
may start playing when selecting
while it is paused. Conversely, the music
may pause when selecting while it is
playing.
●In the following conditions, the system may not function:
• The Bluetooth® device is turned off.
• The Bluetooth® device is not connected.
• The Bluetooth® device has a low battery.
●It may take time to connect the phone
when Bluetooth® audio is being played.
●For operating the portable player, see the instruction manual that comes with it.
●If the Bluetooth® device is disconnected due to poor reception from the
Bluetooth® network when the engine switch is in ACCES-
Control screen
Repeating
Random order
A
B
C
D
E
F
Audio control switch
A
B