2018 Lexus LC500 phone

47
2
-$@-$I@/BWJ@0.&@ &&

2-2. Network settings
Basic function
■Connecting manually
When the auto connection has failed
or “Bluetooth* power” is turned off, it is
necessary to connect Bluetooth®
manually.
*: The Bluetooth® word mark and logos
are registered trademarks owned by
Bluetooth SIG, Inc.
1 Press the “MENU” button on the
Remote Touch.
2 Select “Setup”.
3 Select “Bluetooth*” on the sub
menu.
*: The Bluetooth® word mark and logos
are registered trademarks owned by
Bluetooth SIG, Inc.
4 Follow the steps in “Connecting a
Bluetooth® device” from step 4.
( P.45)
■Reconnecting the Bluetooth®
phone
If a Bluetooth® phone is disconnected
due to poor reception from the
Bluetooth® network when the engine
switch is in ACCES-
SORY or IGNITION ON mode mode>, the system automatically
reconnects the Bluetooth® phone.
The Bluetooth® device’s information
can be displayed on the screen. The
displayed information can be edited.
This operation cannot be performed
while driving.
1 Press the “MENU” button on the
Remote Touch.
2 Select “Setup”.
3 Select “Bluetooth*” on the sub
menu.
*: The Bluetooth® word mark and logos
are registered trademarks owned by
Bluetooth SIG, Inc.
4 Select “Registered device”.
5 Select the desired device to be
edited.
6 Select “Device info”.
Editing the Bluetooth® device
information

48
-$@-$I@/BWJ@0.&@ &&

2-2. Network settings
7Confirm and change the
Bluetooth® device information.
The name of the Bluetooth® device
is displayed. It can be changed to a
desired name. ( P.48)
Select to set the Bluetooth® audio
player connection method.
( P.48)
Device address is unique to the
device and cannot be changed.
Phone number is unique to the
Bluetooth® phone and cannot be
changed.
Compatibility profile is unique to
the Bluetooth® device and cannot
be changed.
Select to reset all setup items.
●If 2 Bluetooth® devices have been regis- tered with the same device name, the devices can be distinguished referring to
the device’s address.
●Depending on the type of phone, some
information may not be displayed.
1 Select “Device name”.
2 Enter the name and select “OK”.
●Even if the device name is changed, the
name registered in your Bluetooth® device does not change.
1 Select “Connect audio player
from”.
2 Select the desired connection
method.
“Vehicle”: Select to connect the audio sys- tem to the audio player.
“Device”: Select to connect the audio player to the audio system.
 Depending on the audio player, the
“Vehicle” or “Device” connection
method may be best. As such, refer
to the manual that comes with the
audio player.
A
B
C
D
E
F
Changing a device name
Setting audio player connection
method

49
2
-$@-$I@/BWJ@0.&@ &&

2-2. Network settings
Basic function
The Bluetooth® settings can be con-
firmed and changed.
1 Press the “MENU” button on the
Remote Touch.
2 Select “Setup”.
3 Select “Bluetooth*” on the sub
menu.
*: The Bluetooth® word mark and logos
are registered trademarks owned by
Bluetooth SIG, Inc.
4 Select “Detailed settings”.
5 Select the desired item to be set.
Select to set Bluetooth® connec-
tion on/off. ( P.49)
Select to change the automatic
connection priority of the regis-
tered Bluetooth® devices. ( P.49)
Select to edit the system informa-
tion. ( P.50)
Select to reset all setup items.
1 Select “Bluetooth* power”.
When “Bluetooth* power” is on:
The Bluetooth® device is automatically
connected when the engine switch
is in ACCESSORY or
IGNITION ON mode .
When “Bluetooth* power” is off:
The Bluetooth® device is discon-
nected, and the system will not connect
to it next time.
●While driving, the auto connection state can be changed from off to on, but can-not be changed from on to off.
*: The Bluetooth® word mark and logos
are registered trademarks owned by
Bluetooth SIG, Inc.
The automatic connection priority of
the registered Bluetooth® devices can
be changed.
1 Select “Preferred device settings”.
2 Select the desired item to be set.
Select to set automatic connection
priority on/off.
Select to change the automatic
connection priority of the regis-
tered Bluetooth® phones.
“Detailed settings” screen
Changing “Bluetooth* power”
A
B
C
D
Setting automatic connection
priority
A
B

50
-$@-$I@/BWJ@0.&@ &&

2-2. Network settings
(P.50)
Select to change the automatic
connection priority of the regis-
tered Bluetooth® audio players.
( P.50)
Select to reset all setup items.
●A newly registered Bluetooth® device will automatically be given the highest automatic connection priority.
■Changing phone automatic con-
nection priority
1 Select “Preferred phones”.
2 Select the desired Bluetooth®
device and select “Move up” or
“Move down” to change the pre-
ferred order.
■Changing audio player automatic
connection priority
1 Select “Preferred audio players”.
2 Select the desired Bluetooth®
device and select “Move up” or
“Move down” to change the pre-
ferred order.
1 Select “System information”.
2 Select the desired item to be set.
Displays system name. Can be
changed to a desired name.
( P.51)
PIN code used when the
Bluetooth® device was registered.
Can be changed to a desired code.
( P.51)
Device address is unique to the
C
D
Editing the system information
A
B
C

51
2
-$@-$I@/BWJ@0.&@ &&

2-2. Network settings
Basic function
device and cannot be changed.
Select to set the phone connection
status display on/off.
Select to set the connection status
display of the audio player on/off.
Compatibility profile of the system
Select to reset all setup items.
■Editing the system name
1 Select “System name”.
2 Enter a name and select “OK”.
■Editing the PIN code
1 Select “System PIN code”.
2 Enter a PIN code and select “OK”.
1 Press the “MENU” button on the
Remote Touch.
2 Select “Setup”.
3 Select “Wi-Fi*” on the sub menu.
4 Select the items to be set.
*:Wi-Fi® is a registered trademark of
Wi-Fi Alliance®.
D
E
F
G
Connecting to internet via
Wi-Fi®
Using the Wi-Fi® function, this sys-
tem can connect to the internet,
which allows the use of the con-
nected services, traffic information,
etc.
Displaying the Wi-Fi® settings
screen

59
2
-$@-$I@/BWJ@0.&@ &&

2-3. Other settings
Basic function
(P.59)
Select to adjust the screen display.
( P.59)
Select to adjust the camera display.
( P.59)
Depending on the position of the head-
light switch, the screen changes to day
or night mode. This feature is available
when the headlight is switched on.
1 Select “Day mode”.
●If the screen is set to day mode with the headlight switch turned on, this condition is memorized even with the engine
turned off.
The contrast and brightness of the
screen can be adjusted according to
the brightness of your surroundings.
1 Select “General” or “Camera”.
2 Select the desired item.
 “Display (General)” screen only:
Select or to select the
desired display.
•“Contrast”
“+”: Select to strengthen the contrast of the
screen.
“-”: Select to weaken the contrast of the
screen.
• “Brightness”
“+”: Select to brighten the screen.
“-”: Select to darken the screen.
Registered or changed personal set-
tings will be deleted or returned to
their default conditions.
1 Press the “MENU” button on the
Remote Touch.
2 Select “Setup”.
3 Select “Delete personal data”.
4 Select “Delete”.
5 Select “Yes” when the confirmation
screen appears.
Examples of settings that can be returned to their default conditions:
 General settings
 Navigation settings
 Audio settings
 Phone settings
 Connected service settings
etc.
Changing between day and night
mode
Adjusting the contrast/brightness
C
D
Deleting personal data

64
-$@-$I@/BWJ@0.&@ &&

3-1. Basic operation
3-1.Basic operation
Destination menu screen is displayed by following operation:
 Press the “MAP” button on the Remote Touch
 Press the “MENU” button on the Remote Touch and then select “Destination”
on the menu screen.
 Select on the map screen.
A short while later after the above methods, the display automatically switches to
normal map screen.
Select to search for a destination by contact, favourite, recent destination,
street address, and POI. ( P.79)
Select to set a destination from favourites. The top 4 favourite destinations
(home, work, and 2 favourites) are disp layed as quick access buttons. Any
favourite in the list can be used to start route guidance directly. ( P.83)
Select to search for a destination from a list of the last destinations. ( P.83)
Select to display the other search me thod (Address, POI, phonebook of con-
nected Bluetooth® device and geo-coodinates).
Quick reference
Destination menu screen
A
B
C
D

73
3
-$@-$I@/BWJ@0.&@ &&

3-1. Basic operation
Navigation system
POI (points of interest) icons such as
petrol stations and restaurants can be
displayed on the map screen. Their
location can also be set as a destina-
tion.
●A particular type of POI icons displayed on the screen can be selected. ( P.109)
Public
Traffic
POI icons
Displaying POI icons
List of POI icons
IconName
Library
College/University
School
Tourist office
Cemetery, funeral director
Government Office, Institution,
City hall, Community gen.
Community
Court house
Place of Worship
Accomodation, Hotel/Motel
Pharmacy
Convention Centre, Exhibition
Centre
Finance, Bank
Cash Dispenser
Post Office
Business, B. Company, B. Gen-
eral, B. facility
Medical, Doctor, Health & Care
Ambulance, Hospital/Polyclinic
Fire Station
Police Station
Phone Box, Communication
Dentist
Veterinarian
IconName
Car Dealer/Repair, Repair Facil-
ity, Repair General, Car Wash,
Tire Repair
Car Dealer
IconName