2018 Lexus LC500 navigation

40
-$@-$I@/BWJ@0.&@ &&

2-2. Network settings
included with the Bluetooth® phone
or portable device for more details.
7 Register the Bluetooth® device
using your Bluetooth® device.
 A PIN code is not required for SSP
(Secure Simple Pairing) compatible
Bluetooth® devices. Depending on
the type of Bluetooth® device being
connected, a message confirming
registration may be displayed on the
Bluetooth® device’s screen.
Respond and operate the
Bluetooth® device according to the
confirmation message.
8 Check that the following screen is
displayed, indicating pairing was
successful.
 The system is connecting to the reg-
istered device.
 At this stage, the Bluetooth® func-
tions are not yet available.
9 Check that “Connected” is dis-
played and registration is complete.
 If an error message is displayed, fol-
low the guidance on the screen to
try again.
●If a cellular phone does not operate prop-
erly after being connected, turn the cellu- lar phone off and on and then connect it again.
■Registering from phone
When registering from the navigation
system is failed, or the phone name
doesn’t appear on the registering
screen, you need to connect the
Bluetooth® phone manually.
1 Press the “MENU” button on the
Remote Touch.
2 Select “Setup”.
3 Select “Bluetooth*” on the sub
menu.
*: The Bluetooth® word mark and logos
are registered trademarks owned by
Bluetooth SIG, Inc.
4 Select “Yes” to register the new
phone.
5 Press the button on the Remote
Touch to select “If you cannot find…”
on the bottom of the screen.

59
2
-$@-$I@/BWJ@0.&@ &&

2-3. Other settings
Basic function
(P.59)
Select to adjust the screen display.
( P.59)
Select to adjust the camera display.
( P.59)
Depending on the position of the head-
light switch, the screen changes to day
or night mode. This feature is available
when the headlight is switched on.
1 Select “Day mode”.
●If the screen is set to day mode with the headlight switch turned on, this condition is memorized even with the engine
turned off.
The contrast and brightness of the
screen can be adjusted according to
the brightness of your surroundings.
1 Select “General” or “Camera”.
2 Select the desired item.
 “Display (General)” screen only:
Select or to select the
desired display.
•“Contrast”
“+”: Select to strengthen the contrast of the
screen.
“-”: Select to weaken the contrast of the
screen.
• “Brightness”
“+”: Select to brighten the screen.
“-”: Select to darken the screen.
Registered or changed personal set-
tings will be deleted or returned to
their default conditions.
1 Press the “MENU” button on the
Remote Touch.
2 Select “Setup”.
3 Select “Delete personal data”.
4 Select “Delete”.
5 Select “Yes” when the confirmation
screen appears.
Examples of settings that can be returned to their default conditions:
 General settings
 Navigation settings
 Audio settings
 Phone settings
 Connected service settings
etc.
Changing between day and night
mode
Adjusting the contrast/brightness
C
D
Deleting personal data

3
63
-$@-$I@/BWJ@0.&@ &&

3
Navigation system
Navigation system
3-1. Basic operation
Quick reference ............................ 64
Map screen operation ............... 69
Map screen information.............. 71
Traffic messages ............................ 76
3-2. Destination search
Search operation .......................... 79
3-3. Route guidance
Starting route guidance............. 90
Route guidance............................. 93
Editing route................................... 95
3-4. Favourite destinations
Registering an entry................... 101
Editing the entry information. 103
3-5. Setup
Map settings................................. 106
Traffic message settings ........... 110
Route preferences settings..... 113
3-6. Tips for the navigation system
GPS (Global Positioning System)
.......................................................... 115
Navigation database updates 117
For vehicles sold outside Europe, some of the functions cannot be operated
while driving.

65
3
-$@-$I@/BWJ@0.&@ &&

3-1. Basic operation
Navigation system
A short while later after the following methods, the display automatically switches
to map screen:
 Press the “MAP” button on the Remote Touch.
 Press the “MENU” button on the Remote Touch, then select “Destination” on
the “Menu” screen.
■After calculating a route to a new destination
Select to zoom in/out the map scale. ( P.70)
Displays the distance to the next turn with the arrow indicating the turn direc-
tion. When the arrow icon is selected, the last navigation announcement will be
repeated.
Displays information about the destination, such as estimated arrival time,
remaining travel time, distance, and traffic prediction information.
• Each time this area is selected, the inform ation will change between the arrival time and
remaining travel time to the destination.
Displays traffic events on the route.
• The remaining length and the re maining delay time are displayed.
Displays the name of the current street or the next street.
Map screen
A
B
C
D
E

67
3
-$@-$I@/BWJ@0.&@ &&

3-1. Basic operation
Navigation system
■During route guidance operation
Select to pause or resume route guidance.
Select to display the traffic messages. It displays a list of traffic messages relat-
ing to the set route, all traffic messages, and warnings. ( P.76)
Select to display fuel station information. The location and fuel price can also be
checked. ( P.227)
Select to display parking lot information. The location, price and available
spaces of parking lots can be checked. ( P.226)
Select to display the route information screen. Route options for the route cal-
culations can be selected. ( P.95)
A
B
C
D
E

69
3
-$@-$I@/BWJ@0.&@ &&

3-1. Basic operation
Navigation system
1Press the “MAP” button on the
Remote Touch.
2 Select “Continue”.
 After about a few seconds, the cau-
tion screen automatically switches
to the map screen.
When starting the navigation system,
the current position is displayed first.
This screen displays the current vehicle
position and a map of the surrounding
area.
1 A short while later after the select-
ing “MAP” button on the Remote
Touch, the display automatically
switches to map screen.
 The current vehicle position mark
appears in the centre of the map
screen.
●While driving, the current vehicle posi- tion mark is fixed on the screen and the map moves.
●The current position is automatically set as the vehicle receives signals from the
GPS (Global Positioning System). If the current position is not correct, it is auto-matically corrected after the vehicle
receives signals from the GPS.
●After battery disconnection, or on a new vehicle, the current position may not be correct. As soon as the system receives
signals from the GPS, the correct current position is displayed.
Use the scroll feature to move the
desired point to the center of the
screen for looking at a point on the
map screen that is different from the
current position.
1 Select the desired point on the map
screen.
 Move the desired point on the cen-
ter of the map screen.
 After the screen is scrolled, it is pos-
sible to do the drag or flick opera-
tion on the touchpad.
Map screen operation
Displaying map screen
Current vehicle position display
Screen scroll operation

71
3
-$@-$I@/BWJ@0.&@ &&

3-1. Basic operation
Navigation system
The map layout can be changed
between 3D heading-up, 2D heading-
up and 2D north-up by selecting the
map layout button.
: 3D Heading-up symbol
The direction of vehicle travel is always up.
: North-up symbol
Regardless of the direction of vehicle
travel, north is always up.
: Heading-up symbol
The direction of vehicle travel is always up.
●Each time map layout button is selected,
the map layout changes as follows: 3D heading-up 2D north-up2D heading-up
Various information can be displayed
on the map.
The speed limit of the road currently
being traveled on can be displayed.
Displays information about the
speed limits icon and limited speed
on the current road.
*:If equipped
Buildings can be displayed in 3D on
the map.
●This feature is displayed on the map in
Map layoutMap screen information
Displaying various information
on the map
Speed limits*
3D buildings
A

73
3
-$@-$I@/BWJ@0.&@ &&

3-1. Basic operation
Navigation system
POI (points of interest) icons such as
petrol stations and restaurants can be
displayed on the map screen. Their
location can also be set as a destina-
tion.
●A particular type of POI icons displayed on the screen can be selected. ( P.109)
Public
Traffic
POI icons
Displaying POI icons
List of POI icons
IconName
Library
College/University
School
Tourist office
Cemetery, funeral director
Government Office, Institution,
City hall, Community gen.
Community
Court house
Place of Worship
Accomodation, Hotel/Motel
Pharmacy
Convention Centre, Exhibition
Centre
Finance, Bank
Cash Dispenser
Post Office
Business, B. Company, B. Gen-
eral, B. facility
Medical, Doctor, Health & Care
Ambulance, Hospital/Polyclinic
Fire Station
Police Station
Phone Box, Communication
Dentist
Veterinarian
IconName
Car Dealer/Repair, Repair Facil-
ity, Repair General, Car Wash,
Tire Repair
Car Dealer
IconName