189
7
- $ @ - $ I @ / B W J @ 0 . & @ & &
7-1. Phone operation (Hands-free system for cellular phones)
Phone
●If your cellular phone does not support
Bluetooth®, this system cannot function.
●In the following conditions, the system
may not function: • The cellular phone is turned off.• The current position is outside the com-
munication area. • The cellular phone is not connected.• The cellular phone has a low battery.
●When using Bluetooth® audio and
hands-free system at the same time, the following problems may occur:
• The Bluetooth® connection may be cut.
• Noise may be heard on the Bluetooth® audio playback.To use the hands-free system for cellu-
lar phones, it is necessary to register a
cellular phone with the system.
( P.39)
■Bluetooth® phone condition dis-
play
The condition of the Bluetooth® phone
appears on the upper right side of the
screen. ( P.18)
Some basics
The hands-free system enables
calls to be made and received with-
out having to take your hands off
the steering wheel.
This system s upports Bluetooth®.
Bluetooth® is a wireless data sys-
tem that enables cellular phones to
be used without being connected
by a cable or placed in a cradle.
The operating procedure of the
phone is explained here.
WARNING
●While driving, do not use a cellular
phone or connect the Bluetooth® phone.
●Your audio unit is fitted with
Bluetooth® antennas. People with implantable cardiac pacemakers, car-diac resynchronization therapy-pace-
makers or implantable cardioverter defibrillators should maintain a reason-able distance between themselves and
the Bluetooth® antennas. The radio waves may affect the operation of such
devices.
●Before using Bluetooth® devices, users of any electrical medical device other than implantable cardiac pace-
makers, cardiac resynchronization therapy-pacemakers or implantable cardioverter defibrillators should con-
sult the manufacturer of the device for information about its operation under the influence of radio waves. Radio
waves could have unexpected effects on the operation of such medical devices.
NOTICE
●Do not leave your cellular phone in the
vehicle. The temperature inside may rise to a level that could damage the phone.
Registering/Connecting a
Bluetooth® phone
215
7
- $ @ - $ I @ / B W J @ 0 . & @ & &
7-3. What to do if...
Phone
system to on. (P.206)
■Notification of SMS/MMS/E-mail
reception on this system is set to
off.
Set notification of SMS/MMS/E-mail
reception on this system to on.
( P.205)
■Automatic message transfer func-
tion is not enabled on the cellular
phone.
Enable automatic transfer function on
the cellular phone.
■Connection confirmation display
on this system is set to on.
To turn off the display, set connection
confirmation display on this system to
off. ( P.50)
*: The engine switch is in
ACCESSORY or IGNITION ON
mode .
■The cellular phone is not close
enough to this system.
Bring the cellular phone closer to this
system.
■Radio interference has occurred.
Turn off Wi-Fi® devices or other
devices that may emit radio waves.
■The cellular phone is the most likely
cause of the symptom.
Turn the cellular phone off, remove and
reinstall the battery pack, and then
restart the cellular phone.
Enable the cellular phone’s Bluetooth®
connection.
Disable the Wi-Fi® connection of the
cellular phone.
Stop the cellular phone’s security soft-
ware and close all applications.
Before using an application installed on
the cellular phone, carefully check its
source and how its operation might
affect this system.
●For details, refer to the owner’s manual that came with the cellular phone.
New message notifications are not
displayed.
In other situations
The Bluetooth® connection status is
displayed at the top of the screen
each time the system is activated.*
Even though all conceivable mea-
sures have been taken, the symptom
status does not change.
