2018 JEEP RENEGADE remote control

THE KEYS
KEY WITH REMOTE CONTROL
1)1)1)
The metal insert A fig. 4 of the key
operates:
the ignition switch;the door lock.
Press button B to open/close the metal
insert.
ELECTRONIC KEY(versions with "Keyless Enter-N-Go"
system)
On versions equipped with "Keyless
Enter-N-Go" system, the vehicle featuresan electronic keyfig. 5, of which two
copies are provided.
Briefly press button
: unlocking of
doors and luggage compartment, timed
switching-on of internal lights and double
flashing of direction indicators (where
provided).
Briefly press button
: lock of doors and
luggage compartment with roof lights off
and single flash of direction indicators
(where provided).
Press button
: remote opening of
the luggage compartment (to open the
luggage compartment press the button
twice in quick succession).
Press button
: remote switching onof the main beam headlights, for a
maximum of 90 seconds.
Pressing button
again or at the end
of the 90 seconds, the lights switched on
previously will go off (if the parking light
function was already active it will remain
so). If, when 90 seconds have passed,
button
is pressed, the main beam
headlights and the side lights will stay on
for further 30 seconds.
REQUEST FOR ADDITIONAL
KEYS
Should a new key with remote control or
a new electronic key be necessary, go to
a Jeep Dealership, taking an ID
document and the vehicle ownership
documents.
WARNING
1)Press button B only with the key away
from your body, especially your eyes and
from objects which could get damaged
(e.g. your clothes). Do not leave the key
unattended to avoid the button being
accidentally pressed while it is being
handled, e.g. by a child.4J0A0181C
5J0A0315C
16
GETTING TO KNOW YOUR CAR

IMPORTANT
1)The electronic components inside the
key may be damaged if the key is
subjected to strong shocks. In order to
ensure complete efficiency of the
electronic devices inside the key, it should
never be exposed to direct sunlight.
IMPORTANT
1)Remote control used batteries may be
harmful to the environment if not disposed
of correctly. They must be disposed of as
specified by law in the special containers
or taken to a Jeep Dealership, which will
take care of their disposal.
IGNITION DEVICE
2) 3) 6) 7)
VERSIONS WITH MECHANICAL KEY
The key can be turned to three different
positions fig. 6:
STOP: engine off, key can be removed,
steering column locked (with key
removed). Some electrical devices (e.g.
central door locking system, alarm, etc.)
are still available;
MAR: driving position. All electrical
devices are available;
AVV: engine starting.
NOTE On versions with automatictransmission the ignition key can only be
removed when the gear lever is at P
(Park).
VERSIONS WITH ELECTRONIC KEY
(Keyless Enter-N-Go system)
To activate the ignition device the
electronic key must be inside the
passenger compartment. The ignition
device fig. 7 activates also if the
electronic key is inside the luggage
compartment or on the rear shelf.
The ignition device has the following
possible states:
STOP: engine off, steering column
locked. Some electrical devices (e.g.
central door locking system, alarm, etc.)
are still available;6J0A0021C
7J0A0022C
17

ALARM
Activation of the alarm triggers the
acoustic warning and the direction
indicators.
IMPORTANT The alarm is adapted to
meet requirements in various
countries.
SWITCHING ON THE ALARM
With the doors, bonnet and tailgate
closed and the ignition device turned to
STOP, point the key with remote control
(or electronic key) towards the vehicle
and press and release button
.
Except for specific markets, the system
emits a visual and acoustic signal and
enables door locking.
With the alarm on, warning light A
fig. 8 flashes on the instrument panel.
TURNING THE ALARM OFF
Press thebutton.
IMPORTANT The alarm does not
switch off when the central opening is
activated using the metal insert in the
key.DISABLING THE ALARM
To completely deactivate the alarm (e.g.
during a long period of vehicle inactivity),
close the doors by turning the metal
insert of the key with remote control in
the door lock.
IMPORTANT If the batteries of the key
with the remote control run out or the
system fails, the alarm can be
switched off by placing the ignition
device to MAR. On versions equipped
with Keyless Enter-N-Go system,
manually open the doors by placing
the metal insert that is in the key in
the driver side door pawl and then
place the same electronic key on the
ignition device.
8J0A0191C
20
GETTING TO KNOW YOUR CAR

Tailgate lock locking: with tailgate closed
press button A fig. 15.NOTE The tailgate door lock also
performs a central locking of the doors.
Boot opening is disabled while the car is
moving.
DEAD LOCK(where provided)
9)
This inhibits the operation of the interior
door handles and the door
locking/unlocking button.
Activating the device: the device is
enabled on all the doors by quickly
double-pressing the
button on the key.
Deactivating the device: press button
on
the key with remote control or place the
ignition device to MAR.
CHILD SAFETY DEVICE
10)
This system prevents the rear doors from
being opened from the inside.
The device A fig. 16 can only be engaged
with the doors open:
position: device engaged (door
locked);
position: device not engaged (door
may be opened from the inside).The device remains engaged even if the
doors are electrically unlocked.
IMPORTANT The rear doors cannot be
opened from the inside when the child
lock device is engaged.
14J0A0621C
15J0A0896C
16J0A0041C
23

The electrochromic mirror has an
ON/OFF button to activate/deactivate the
electrochromic anti-glaring function.
DOOR MIRRORS
Electric adjustment
18)
Adjusting the mirrors is possible with the
ignition device at MAR and for about
3 minutes after the ignition device
switches to STOP (or also after the
mechanical key has been extracted, for
cars equipped with mechanical key with
remote control). When one of the front
doors is opened this operation is
disabled.Select the desired mirror using device A
fig. 29:
device in position 1: left mirror
selected;
device in position 2: right mirror
selected.
To adjust the selected mirror, press
button B fig. 29 in the four directions
shown by the arrows.
IMPORTANT To prevent accidental
movement once adjustment is
complete, rotate device A fig. 29 to
position 0.
Electric mirror folding
(where provided)
To fold the mirrors, press button Cfig. 29. Press the button again to restore
the mirrors to the driving position. If
button C is pressed during door mirror
folding (from closed to open position and
vice versa), their movement direction is
reversed.
You can fold or open the mirrors with the
ignition device at MAR and for about
3 minutes after switching the ignition
device to STOP (or also after extracting
the mechanical key, for cars equipped
with a mechanical key with remote
control). When one of the front doors is
opened this operation is disabled.
IMPORTANT While driving mirrors
must always be open and should never
be folded.
Mirrors realignment operation
In case one of the door mirrors has been
moved manually it may occur that the
mirror itself does not retain its position in
a stable way while driving.
In that case it is necessary to carry out
the following realignment operation:
manually close the mirror to the
parking position by folding it from
position 1 to position 2 fig. 30;
operate the mirror opening control C
fig. 29 once or twice to realign the
system and bring both mirrors to the
driving position.
28J0A0059C
29J0A0061C
30
GETTING TO KNOW YOUR CAR

If the headlights are switched off before
the ignition, they will switch off normally.
MAIN BEAM HEADLIGHTS
To activate the fixed main beam
headlights, with the ignition device in
MAR, push left lever A fig. 32 (car travel
direction). The light switch should be
turned toAUTOwith the dipped beam
headlights on, or it should be turned to
position
.
To flash, the unstable position is used
(activate by pulling the lever towards
you). With main beam headlights on, the
warning light on the instrument
panel will come on at the same time.
The main beam headlights are
deactivated bringing the lever back to the
central stable position. Warning light
switches off in the instrument panel.Automatic main beam headlights
This function is enabled with the display
Menu or theUconnect™system, and with
the light switch turned to AUTO.
The first time the main beam headlights
are activated (pushing the left lever), the
function is activated (green warning light
comes on in the instrument panel).
If the main beam headlights are actually
on, the blue
warning light will also
come on in the instrument panel.
To deactivate the automatic function
rotate the light switch ring nut to position
.
DIRECTION INDICATORS
Bring left lever A fig. 32 to the (stable)
position:
upwards: activates the right direction
indicator;
downwards: activates the left direction
indicator.
"Lane Change" function
If you wish to signal a lane change, place
the left lever in the unstable position for
less than half a second. The direction
indicator on the side selected will flash
five times and then switch off
automatically.
COURTESY LIGHTS
This function, with the ignition device in
MAR, allows activating the side lights
and the number plate lights for
25 seconds, each time the car is
unlocked with the key with remote
control, or the “Passive Entry” system
(where present).
Enabling the function can be adjusted
through the display Menu or the
Uconnect™system.
The function is automatically disabled
once the activation time elapses
(25 seconds), or when the car doors are
locked again, or by turning the ignition
device to a non-MAR position.
32J0A0063C
33

IMPORTANT
2)The system uses R134a coolant, which
does not pollute the environment in the
event of accidental leakage. Under no
circumstances use R1234yf and
R12 fluids, which are incompatible with
the components of the system.
ELECTRIC WINDOWS
ELECTRIC WINDOWS
22)
They operate with the ignition device at
MAR and for nearly 3 minutes after the
ignition device switches to STOP (or also
after the mechanical key has been
extracted, for vehicles equipped with
mechanical key with remote control).
When one of the front doors is opened
this operation is disabled.
Driver side front door controls
The buttons are located on the trims of
the left side door panels (left hand drive
versions) or of the right side door panels
(right hand drive versions). All windows
can be controlled from the driver side
door panel fig. 39.
A: front left window opening/closing.
"Continuous automatic" operation during
window opening/closing stage and
anti-pinch system activated.
B: right front window opening/closing.
"Continuous automatic" operation during
window opening/closing stage and
anti-pinch system activated.
C: enabling/disabling of rear door
electric window controls;
D: left rear window opening/closing (if
present). "Automatic continuous"
operation during window opening/closing,
manual electric operation during window
closing;
E: right rear window opening/closing
(if present). "Automatic continuous"
operation during window opening/closing,
39J0A0078C
45

manual electric operation during window
closing.
Window opening
Push the buttons to open the desired
window.
When any of the opening buttons on front
or rear doors is pressed briefly, the
window moves in stages; if the button is
held down, "continuous automatic"
operation is activated.
If the button is pressed again, the
window will stop in the desired position.
Window closing
Lift the buttons to close the desired
window.
The window closing stage occurs
following the same logic described for
the opening stage, for the front door
windows only.
The rear door windows can only be closed
"in stages".
Front window anti-pinch safety device
(where provided)
This safety system can recognise the
presence of any obstacle during the
window closing movement. If this occurs,
the system stops the window's movement
and reverts it by a few centimetres,
depending on its position.
The anti-crush safety function isactivated both during the manual and the
automatic operation of the window.
Electric window system initialisation
If power supply is interrupted, the
electric window automatic operation
must be reinitialised.
The initialisation procedure described
below must be carried out with the doors
closed and for each door:
fully close the window to be
initialised, with manual operation;
after the window has reached the
upper end of travel, hold the up button
down for at least 3 seconds.
WARNING
22)Incorrect use of the electric windows
may be dangerous. Before and during their
operation, ensure that any passengers are
not at risk from the moving glass either by
personal objects getting caught in the
mechanism or by being hit by it directly.
When leaving the vehicle (equipped with
mechanical key with remote control),
always remove the key from the ignition
device to prevent accidental operation of
the electric windows from being a hazard
for those still on board.
ELECTRIC SUN ROOF
23)11)
The electric sun roof comprises two glass
panels (the front one is mobile and the
rear one fixed) and is fitted with an
electrically operated sun blind.
On some versions, the front panel might
be electrically operated.
The sun roof and the blind can be
operated only with the ignition device
turned to MAR.
CONTROL BUTTONS
Button Afig. 40: press the button on the
front glass panel to open it fully. Pull the
button: the front panel will close fully.
Press button A again during automatic
opening and closing to stop the blind
movement.
46
GETTING TO KNOW YOUR CAR