7-73
7
Maintenance
Unit: mm (in)■Type A
Aiming point
OAE076068L
Vehicle condition H1 H2
W1 W2
Without driver714
(28.11)688
(27.08)
1,463
(57.59)1,238
(48.74)
With driver707
(27.83)681
(26.81)
1,463
(57.59)1,238
(48.74)
Vehicle condition H1 H2W1 W2
Without driver709
(27.91)709
(27.91)
1,454
(57.24)1,454
(57.24)
With driver702
(27.63)702
(27.63)
1,454
(57.24)1,454
(57.24)
■Type B
H1 : Height between the head lamp bulb center and ground (Low beam)
H2 : Height between the head lamp bulb center and ground (High beam)
W1 : Distance between the two head lamp bulbs centers (Low beam)
W2 : Distance between the two head lamp bulbs centers (High beam)
7-74
Maintenance
Headlamp low beam (LHD side)
1. Turn the low beam on without driver aboard.
2. The cut-off line should be projected in the cut-off line shown in the picture.
3. When aiming the low beam, vertical aiming should be adjusted after adjusting the horizontal aiming.
4. If headlamp leveling device is equipped, adjust the head lamp leveling device switch to “0”.
: &