2018 Hyundai Elantra GT Quick Reference Guide

Quick Reference Guide I 31
30 I Quick Reference Guide
Elantra GT HYUNDAI
MULTIMEDIA
Preconditions: • Ignition is OFF
• Alarm is armed (i.e., vehicle locked by key fob Remote Door Lock)
• Gearshift level is in the P (Park) position
• Brake pedal is not depressed
• Engine hood is securely closed
• All the doors are closed and locked
• The tailgate or trunk lid is closed
• The security/panic system is not activated
• The proximity key is not inside the vehicle
• The battery power is not low
• Vehicle is located in an open area
• It has been less than 4 days since last vehicle ignition off
• Vehicle located in area with good cell receptionRemote Start will terminate: • After 10 minutes or after selected engine timer runs out in navigation
vehicles
• Brake is pressed without proximity key inside vehicle
• Alarm is triggered without proximity key inside vehicle
• Door/trunk is opened from inside the vehicleNotice: Laws in some communities may restrict the use of the
features that remotely start the engine. For example, some laws may
require a person using the remote start feature to have the vehicle in
view when doing so or limit the length of time a vehicle engine may
idle. Please check local and state regulations for any requirements
and restrictions on remote starting of vehicles and engine idling time.
WARNING!
Do not remote start vehicle in an enclosed environment (i.e., closed garage). Prolonged operation of a
motor vehicle in an enclosed environment can cause a harmful build-up of carbon monoxide. Carbon
monoxide is harmful to your health. Exposure to high levels of carbon monoxide can cause headaches,
dizziness or in extreme cases unconsciousness and/or death. Do not leave children or animals
unattended in a vehicle while using the remote start function.
CAUTION!
If the vehicle’s windshield wipers are left on when the vehicle was last driven, then the wipers will turn
on if the remote start function is activated. To avoid damage to the wiper blades (i.e., due to heavy ice
or snow accumulated on the windshield), please always turn the vehicle’s windshield wipers off when
parking the vehicle.
Basic features on map screen1 Place button : Go to the Place menu.2 Home button : Go to the Home screen.3 Map button : Change the map view mode.4 NAV volume button : Adjusts the volume.5 Zoom in button : Zoom the map view screen in.6 Map scale display : Set the zoom level automatically according
to the guidance.7 Zoom out button : Zoom the map view screen out.8 Quick menu button : Quick menu for destination selection and options.9 Map scroll mark : Touch to scroll the map.10 Guidance button : Start the preferred navigation route to
selected location.
11 Routes : Choose the preferred navigation route to selected location.12 Waypoint button : Set a waypoint to the current route.13 Save button : Save frequently used address to address book.14 POI button : Find a POI(Point Of Interest) around the current position.15 Vehicle position mark : View the vehicle’s current position on
the map screen.
15
11
10
12
13
14
234
1
567
8
9
NAVIGATION

Quick Reference Guide I 33
32 I Quick Reference Guide
Elantra GT HYUNDAI
Use the input jack to connect an
external audio device and listen
to it through the audio system in
your vehicle.
iPod® is a trademark of Apple, Inc.
Destination search screen1 Address : Set destination by address search.2 Previous destinations : Select from previously inputted addresses
and POIs.3 Local search : Runs Google Local Search.4 POI categories : Select the desired item in the sub-categories.5 Gas stations : Select the desired destinations among the
searched gas stations.6 Restaurants : Select the desired destination among the searched
restaurants.7 Emergency : Select the desired destination among the searched
emergency facilities.8 Address Book : Search the destination with the address book.9 Coordinates : You can find a destination by entering the
coordinates of latitude and longitude.
Press [NAV] button in the navigation head unit, and finds a destination by
using the [Destination] menu.
2
3
4
15
6
7
8
9
MULTIMEDIA
AUX, USB AND iPod
® PORT
Type A Type B
This feature resets to OFF every time the
engine is restarted.The Auto Hold feature assists in hilly areas.
It applies the brake until the accelerator
pedal is pressed.
1. Press the AUTO HOLD
switch. When the AUTO HOLD
indicator is white, the system
is on and in standby mode.
WHITE
2. When you stop the vehicle
completely by using the brake
pedal and the AUTO HOLD
indicator turns green, Auto
Hold will maintain the brake
pressure to hold the vehicle
stationary. Press the
accelerator pedal to resume
driving.
GREENLIGHT
OFFApplying EPBDepress the brake pedal and then pull up
the EPB switch.Releasing EPBTurn the engine ON, depress the brake
pedal and push the EPB switch down or
Automatically release EPB. With engine
ON, doors closed, and seat belt fastened
shift from P (Park) to R (Reverse) or D
(Drive). Depress the accelerator pedal.
AUTO HOLDELECTRONIC PARKING BRAKE (EPB)
3. To turn off the Auto Hold
feature, press the brake
pedal and press the AUTO
HOLD switch. The AUTO
HOLD indicator light will turn
off.

Quick Reference Guide I 35
34 I Quick Reference Guide
Elantra GT HYUNDAI
DRIVING
LOW TIRE PRESSURE INDICATORIlluminates if one or more of your tire is significantly under-inflated.TPMS MALFUNCTION INDICATORBlinks for approximately one minute, then remains illuminated when
there is a malfunction with the TPMS. Inspect all tires and adjust the tire
pressure to specification. If the lamp remains illuminated, we
recommend the vehicle be checked by an authorized HYUNDAI dealer.LOW TIRE PRESSURE / TIRE PRESSURE MONITOR /
TPMS MALFUNCTION DISPLAY(LCD DISPLAY)Tire pressures will display after driving a short distance. If a tire
pressure drops lower than predetermined specification, the Low Tire
Pressure Indicator
will illuminate and the LCD display will indicate
Tire(s) requiring air.Low Tire Pressure /
Tire Pressure Monitor /
TPMS Malfunction Display
(shown on the cluster LCD display) Low Tire Pressure Indicator /
TPMS Malfunction Indicator
TIRE PRESSURE MONITORING SYSTEM (TPMS)
MANUAL TRANSMISSION
Engaging reverse When shifting into R (Reverse) gear,
depress the button
1 and then shift
into R (Reverse) gear position.
1

Quick Reference Guide I 37
36 I Quick Reference Guide
Elantra GT HYUNDAI
DRIVING
(
) :
Depress the brake pedal and press the shift button while moving the shift lever.
(
) : Press the shift button while moving the shift lever.
() : The shift lever can freely operate.
Move the shift lever from D (Drive) into the manual gate to select.
Move the shift lever forward (+) to up shift or rearward (−) to downshiftManual shift modeNOTE:
Dual Clutch Transmission (DCT) characteristics
The technology of the Dual Clutch Transmission is different from a
traditional automatic transmission:
• The DCT can be thought of as an automatically shifting manual
transmission. It gives the driving feel of a manual transmission, yet
provides the ease of a fully automatic transmission.
• When you turn the engine on and off, you may hear clicking sounds as
the system goes through a self test.
This is a normal sound for the DCT.
AUTOMATIC TRANSMISSION &
DUAL CLUTCH TRANSMISSION (DCT)
• When you stop on a hill, if you remove your foot from the brake pedal,
the vehicle will remain stationary for approximately two seconds to
prevent the vehicle from rolling backwards. If you depress the
accelerator pedal during the two second interval, the vehicle will
accelerate.
If you wait more than two seconds, the vehicle will enter creep mode
and may roll backwards if the hill is steep.
• Engage AUTO HOLD in hilly areas to eliminate vehicle creep or roll
back.Caution• You should always use the foot brake or AUTO HOLD to hold the car
on a hill until you are ready to drive. Using creep mode to hold the car
on a hill may damage the clutch.
• If the clutch becomes overheated by excessive use of the clutch to hold
on a hill, you may notice a shudder feeling and a blinking display on
the instrument cluster. When this occurs, the clutch is disabled until the
clutch cools to normal temperatures. If this occurs, pull over to a safe
location, shift into P (Park) and apply the foot brake for a few minutes.PADDLE SHIFTER
The paddle shifter is available when the shift lever is
in the D (Drive) position or the manual shift mode.
Pull the [+] or [-] paddle shifter once to shift up or
down one gear.
Move the shift lever from manual shift mode back
to D (Drive) to return to automatic shift mode.
Press (-) to
downshiftPress (+) to
upshift

Quick Reference Guide I 39
38 I Quick Reference Guide
Elantra GT HYUNDAI
DRIVING
ESC automatically selects the ON
position when the engine is started.To turn off Traction ControlPress the ESC OFF button once.To turn off Traction & Stability
ControlPress the ESC OFF button for more
than 3 seconds.The ESC system is an electronic
system designed to help the driver
maintain vehicle control under
adverse conditions.
LANE KEEPING ASSIST SYSTEM (LKAS)
The Lane Keeping Assist System
detects lane markers on the road,
and assist the driver's steering to
help keep the vehicle between lanes.
• To turn on the LKAS, press the
LKAS switch.
• To turn off the LKAS, press the
switch again.
LKAS opearates only while the
vehicle speed is over 40mph and
below 110mph.
For more detailed information, please
refer to Section 5 of the Owner's
Manual.
ELECTRONIC STABILITY CONTROL (ESC)
2
The Blind Spot Detection system uses
radar sensors to monitor and warn the
driver of an approaching vehicle in the
driver's blind spot area.1 Blind Spot Detection (BSD)2 Lane Change Assist (LCA)3 Rear Cross Traffic Alert (RCTA)
• To turn on the BSD, press the BSD
button (indicator illuminated).
• BSD and LCA operate in D (Drive)
over appx. 20mph.
• RCTA operates in R (Reverse)
under appx. 6mph.
• To turn off the BSD, press the BSD
button again.
When the vehicle is in R (Reverse), the system provides an alert if a
vehicle or pedestrian is approaching from the sides.Rear Cross Traffic Alert
3
1AUTOMATIC EMERGENCY BRAKING (AEB)The Automatic Emergency Braking (AEB) system is designed to help
detect and monitor the vehicle ahead or detect a pedestrian in the
roadway through radar signals and camera recognition to warn the
driver that a collision is imminent, and if necessary, apply emergency
braking.To activate or deactivate the AEB system, select or deselect:
“User Settings
Driving Assist
Automatic Emergency Braking”
The AEB deactivates when system setting is deselected. A warning
light
will illuminate on the LCD display when the AEB system is
deactivated. Please refer to the Owner’s Manual for more information.
Caution: Do not try to test the AEB system.
BLIND SPOT DETECTION SYSTEM (BSD)

Quick Reference Guide I 41
40 I Quick Reference Guide
Elantra GT HYUNDAI
DRIVING
The Driver Attention Alert (DAA) system
displays the condition of the driver's fatigue
level and inattentive driving practices. The DAA
system monitors the lane markers and driver's
inputs to the steering wheel, accelerator pedal
and brake pedal.
To turn ON the Driver Attention Alert system,
turn on the engine, and then select
‘User Settings
Driving Assist

Driver Attention Alert
Normal / Early’
on the LCD Display.
The Driver Attention Alert system is operable when driving over 40mph.
The system can be reset when the driver turns the engine OFF.
For more detailed information on any of these topics, please refer to
Section 5 of the Owner's Manual.
DRIVER ATTENTION ALERT SYSTEM
The drive mode may be selected
according to the driver's preference
or road condition. The system resets
to NORMAL mode every time the
engine is restarted.
Each time you press the button, the
drive mode changes as following :
Normal mode provides regular daily driving performance with some
fuel efficiency. When Normal mode is selected, it is not displayed on
the instrument cluster.NORMAL modeSport mode focuses on enhanced driving dynamics by adjusting the
steering feel along with the responsiveness of the engine and
transmission. In Sport mode, the fuel efficiency may decrease.SPORT mode
NORMAL

SPORT
To improve your fuel efficiency:• Drive smoothly and accelerate at a moderate rate.
• Avoid heavy accelerations.
• Maintain steady cruising speed.
• Adjust the vehicle speed to the traffic condition and avoid speed changes.
• Avoid unnecessary braking.
• Keep the tires inflated to the recommended tire pressure.
• Do not idle the engine longer than necessary. DRIVE MODE INTEGRATED CONTROL SYSTEM

Quick Reference Guide I 43
42 I Quick Reference Guide
Elantra GT HYUNDAI
DRIVING
1 To turn on/off the cruise control.2 To resume or increase the cruise
control speed.3 To set or decrease the cruise
control speed.4 To cancel the cruise control set speed. The Cruise Control system allows you to
program the vehicle to maintain a
constant speed without depressing the
accelerator pedal.
Advanced Smart Cruise Control will stop your vehicle if the vehicle ahead of
you stops. If the vehicle ahead of you starts moving, your vehicle will start as
well. However, if the vehicle stops for more than 3 seconds, you must depress
the accelerator pedal or push up/down the toggie switch (RES+/SET-) to start
driving.
For more detailed information please refer to Section 5 of the Owner's Manual.Setting Vehicle Distance (Smart
Cruise Control only)This system allows you to program
the vehicle to maintain constant
speed and minimum distance
between the vehicle ahead.
The vehicle to vehicle distance
1 will
automatically activate when you set
the cruise speed
2.
Each time the vehicle distance set
button is pressed, the vehicle to
vehicle distance changes as
following:
2
1
Distance 2 Distance 3 Distance 4
(Longest)
Distance 1(Shortest)
2341
CRUISE CONTROL / ADVANCED SMART CRUISE CONTROL
MEMO

44 I Quick Reference Guide
HYUNDAI
Sales Consultant Date Sales Manager Date
Customer Date
Email
MEMO
MEMO
Quick Reference Guide I 45
Elantra GTHYUNDAI VEHICLE OWNER PRIVACY POLICY
Your Hyundai vehicle may be equipped with technologies and services
that use information collected, generated, recorded or stored by the
vehicle. Hyundai has created a Vehicle Owner Privacy Policy to explain
how these technologies and services collect, use, and share this
information.
You may read our Vehicle Owner Privacy Policy on the Hyundaiusa.com
website at https://www.hyundaiusa.com/owner-privacy-policy.aspx
If you would like to receive a hard copy of our Vehicle Owner Privacy
Policy, please contact our Customer Connect Center at:
Hyundai Motor America
Hyundai Customer Connect Center
P.O. Box 20850
Fountain Valley, CA 92728-0850
800-633-5151 [email protected]
Hyundai's Customer Connect Center representatives are available
Monday through Friday, between the hours of 5:00 AM and 7:00 PM
PST and Saturday and Sunday between 6:30 AM and 3:00 PM PST
(English). For Customer Connect Center assistance in Spanish or
Korean, representatives are available Monday through Friday between
6:30 AM and 3:00 PM PST.
ELANTRA GT CUSTOMER DELIVERY CHECK LIST HYUNDAI OWNER DEALERSHIP NAME SALES CONSULTANT DATE VIN PREVIOUS VEHICLE☐
CONFIRM “GOOD BATTERY” USING CADEX AND STAPLE
TEST TICKET HERE
☐

SET TIRE PRESSURE LF

RF
RR
LR
☐
VERIFY VEHICLE IS CLEAN, IN GOOD CONDITION,
FREE OF CHIPS AND SCRATCHES · CLEAN WINDSHIELD
AND BACK WINDOW
☐ ENSURE FLOORMATS ARE SNAPPED INTO PLACEBEFORE DELIVERY