2018 Hyundai Elantra GT Quick Reference Guide

Quick Reference Guide I 15
14 I Quick Reference Guide
Elantra GT HYUNDAI
Standard Programming To train most devices, follow these instructions:
1. For the first-time programming, press and hold the two outside
buttons, HomeLink
® Channel 1 and Channel 3 buttons, until the
indicator light begins to flash (after 10 seconds). Release both
buttons. Do not hold the buttons for over 20 seconds.
2. Position the end of your hand-held transmitter 1-3in. (2-8cm)
away from the HomeLink
® buttons while keeping the indicator
light in view.
3. Simultaneously press and hold both the HomeLink
® and the
hand-held transmitter button. DO NOT release the buttons until
step 4 has been completed.
4. While continuing to hold the buttons, the red indicator Status LED
will flash slowly and then rapidly after HomeLink
® successfully
trains to the frequency signal from the hand-held transmitter.
Release both buttons.
For more detailed information, please refer to Section 3 of your Owner’s
Manual, or visit www.homelink.com or call (800) 355-3515.
HOMELINK WIRELESS CONTROL SYSTEM
FEATURES AND CONTROLS
WIRELESS CELLULAR PHONE CHARGING SYSTEM
There is a wireless cellular phone
charging system inside the front
console. The system operates with
all doors closed, and the ignition
switch is in the ACC/ON position.NOTE:The wireless cellular phone
charging system supports only
the Qi-enabled cellular phones (
).
NOTE: Do not place any metallic items
such as coins, keys on the charger.
Avoid to put credit cards, etc. on
the charger as they might get
damaged by the magnetic field.
REAR VIEW CAMERA
When the shift lever is moved
to R(Reverse), rear view camera
displays the area behind the vehicle.

Quick Reference Guide I 17
16 I Quick Reference Guide
Elantra GT HYUNDAI
FEATURES AND CONTROLS
With NavigationCLOCK ADJUSTMENT
1. Press the SETUP( ) button on the
audio head unit.
2. Select Date/Time.
3. Select the desired items.
Date/Time
If you tap any value, you can directly
enter the number in the screen.
Daylight Saving Time
The daylight saving time(DST) is
applied.
24 Hours
Choose between 12-hour and
24-hour time format.
With Audio
1 Tachometer2 Speedometer3 Engine coolant temperature gauge4 Fuel gauge5 Warning and indicator lights6 LCD display (including Trip computer)
55
5
4
1
2
3
6
5
55
4
1
2
3
6
INSTRUMENT CLUSTERType B Type A
1. Press the SETUP( ) button on the
navigation head unit.
2. Select Date/Time.
3. Select the desired items.
GPS time
Displays time according to the
received GNSS(Global Navigation
Satellite System) time.

Quick Reference Guide I 19
18 I Quick Reference Guide
Elantra GT HYUNDAI
WARNINGS AND INDICATORS
Automatic Emergency
Braking (AEB) warning
light
Air bag warning light
Seat belt
warning light
Anti-lock Brake
System (ABS)
warning light
Electronic Brake force Distribution (EBD)
System warning light
Electric Power Steering
(EPS) warning lightMaster warning lightElectronic Stability
Control (ESC)
Indicator Light
Electronic Stability
Control (ESC) OFF
indicator light
Immobilizer indicator
Turn signal indicator
light
High beam indicator
light
Exterior light warning
light
Light ON indicator
light
Cruise indicator
Cruise SET indicator
SPORT mode
indicator
Washer fluid warning
light (if equipped)
Charging system
warning light
Engine oil pressure
warning light
Malfunction Indicator
Lamp (MIL)
Low tire pressure
warning light / TPMS
malfunction
Low fuel level
warning light
FEATURES AND CONTROLS
Press the illumination control button
to adjust the instrument cluster
illumination brightness.
INSTRUMENT PANEL ILLUMINATION
1 : MODE button for changing
modes2 : MOVE switch for changing
items3 : SELECT / RESET button for
setting or resetting the
selected item
LCD DISPLAY CONTROL
Type B Type A
3
2
2
1
1LCD DISPLAY MODES
Modes Symbol ExplanationTrip ComputerThis mode displays driving information such
as the tripmeter, fuel economy, etc.
Turn By Turn (TBT)
(if equipped)This mode displays the state of the
navigation.
AssistThis mode displays the state of :
- Lane Keeping Assist System (LKAS)
- Advanced Smart Cruise Control
- Driver Attention Alert (DAA)
- Tire Pressure
User SettingsIn this mode, you can change settings of
the doors, lamps, etc.
WarningThis mode displays warning messages related
to the Blind Spot Detection system, etc.
Parking brake & brake
fluid warning lightLane Keeping Assist
System (LKAS) Indicator
Smart high beam
indicatorElectric Parking Brake
(EPB) warning light
AUTO HOLD indicatorIcy road warning
light
3

Quick Reference Guide I 21
20 I Quick Reference Guide
Elantra GT HYUNDAI
FEATURES AND CONTROLS
NOTE:
To reduce the tendency of the glass fogging and also to improve
visibility, keep the interior surface of the windshield clean by wiping it with
a clean cloth and glass cleaner. In addition, select air intake control to the
outside (fresh) air position whenever possible while operating the vehicle.
DEFOGGING
/ DEFROSTING AIR INTAKE CONTROL3. Set the fan speed
to the highest
setting. 2. Set the temperature
control to the
warmest setting.Outside (fresh) air
position1. Press the front
windshield defrost
button.Recirculated air
position
REAR WINDOW DEFROSTERPress to activate/deactivate
the rear window defroster.
Changes the direction of the air
flow as follow.MODE SELECTION
Face-Level
Bi-Level
Floor-Level
Floor & Defrost-Level
Defrost-Level
MANUAL CLIMATE CONTROL 1 Fan speed control knob2 Temperature control knob3 Mode selection buttons4 Front windshield defroster button
5 Rear window defroster button6 A/C (Air conditioning) button7 Air intake control button
3
3
3
3
4
5
7
6
1
2

Quick Reference Guide I 23
22 I Quick Reference Guide
Elantra GT HYUNDAI
FEATURES AND CONTROLS
NOTE:
To reduce the tendency of the glass fogging and also to improve
visibility, keep the interior surface of the windshield clean by wiping it with
a clean cloth and glass cleaner. In addition, select air intake control to the
outside (fresh) air position whenever possible while operating the vehicle.
DEFOGGING
/ DEFROSTING3. Set the fan speed
to the highest
setting.2. Set the temperature
control to the
warmest setting.1. Press the front
windshield
defrost control
button.
SYSTEM OFF
Pressing the OFF button will place the system in the OFF mode.
• Blower will turn off.
• Outside (fresh) air position will be selected.
• Vented air will be at last set temperature.
SYNC BUTTON
Press the SYNC button to adjust the driver and
passenger side temperature and air flow direction
equally.
AUTOMATIC HEATING / AIR CONDITIONING
2. Set the temperature
control to the desired
setting.
1. Press the AUTO
button.
Controls the modes, fan speeds, air intake and air-conditioning automatically.
REAR WINDOW DEFROSTER
Press to activate/deactivate the rear window
defroster.
AIR INTAKE CONTROL
Outside (fresh) air
position
Recirculated
air positionChanges the direction of the air flow as follow.
MODE SELECTION
AUTOMATIC CLIMATE CONTROL
7 SYNC button8 Front windshield defroster button9 Rear window defroster button10 Air conditioning button11 Air intake control button12 Climate control information screen
1 Driver's temperature control knob2 Passenger's temperature control konb3 AUTO (automatic control) button4 OFF button5 Fan speed control button6 Mode selection button
3
4
5
5
7
6
89
10
1
12
11
2

Quick Reference Guide I 25
24 I Quick Reference Guide
Elantra GT HYUNDAI
MULTIMEDIA
1 VOICE RECOGNITION

Activates the voice recognition
system.
2 SEEK / PRESET ( / ) Changes station.3 MODE Changes the audio source.4 VOLUME (VOL + / -
) Increase or decrease the volume.
Press to Mute.
Making a call using voice recognition:
Press
button on the steering
wheel control to activate voice
recognition.
Press and hold
button to end
voice recognition.
Calling by Name:
1. Press the
button.
2. Say the following command:
• “Call ”: Connects the call to John.
• “ Call on Other>”: Connects the call to John’s Mobile, Work, Home, or
Other phone number.
Dialing by Number:
1. Press the button.
2. Say “Dial Number.”
3. Say the desired phone number.
For the complete list of commands, refer to your Owner’s Manual. To Answer a Call:
• Press the button on the steering wheel.
To Reject a Call:
• Press the button on the steering wheel.
To Adjust Ring Volume:
• Use the VOLUME buttons on the steering wheel while it is ringing.
To Transfer a Call to the Phone
(Private call on handset – do not use while driving):
• Press and hold the
button on the steering wheel until the
audio system transfers a call to the phone.
To Finish a Call:
• Press the
button on the steering wheel.
In the following situations you or the other party may have difficulty
hearing each other:
1. Keep the Bluetooth®
volume to a low level. High level volume may
result in distortion and echo.
2. When driving on a rough road, high speeds and/or with the window
open.
3. When the air conditioning vents are facing the microphone and/or
when the air conditioning fan is at the max speed.
Steering wheel bluetooth
® control
1 CALL Places and transfers calls.2 END Ends calls or cancels functions.
BLUETOOTH
® PHONE CALL OPERATIONAL TIPS
2
1
23
14STEERING WHEEL AUDIO CONTROL Position, tone, priority and advanced sound settings can be customized
in the audio/ navigation unit. Press the SETUP
button then select
Sound.

Quick Reference Guide I 27
26 I Quick Reference Guide
Elantra GT HYUNDAI
MULTIMEDIA
Your vehicle is equipped with Voice Recognition technology which allows drivers to
operate their phones without having to take their eyes off the road to minimize
distractions.
Voice recognition performance may be affected if driving with windows
and sun roof open; when the heating-cooling system is on; when driving in
a tunnel or when driving on rugged and uneven roads.
Quick reference on using voice commands
To start voice command, press the
key, the following commands are
available:
Command FunctionCall Displays downloaded Contacts.
Call Calls saved in Contacts.
Dial Number Displays a screen where you can say a phone number to dial.
Dial You can directly say the number to call.
ex) Dial 111 555 1234
RedialCalls the number you last dialed.
Call History Displays your Call History.
1. Press the PHONE( ) button in the head unit or CALL( ) button
in the steering wheel remote control.
2. Pair your car after your mobile phone detects the Bluetooth
device.
3. Enter the passkey or accept the authorization popup.
4. Connect Bluetooth.Phone setup (pairing phone) with Audio
NOTE:
Vehicle must be parked to complete pairing process.
VOICE RECOGNITION TIPS
BLUETOOTH
® PHONE OPERATION
Phone setup (pairing phone) with Navigation1. Press the CALL( ) button in the steering wheel remote control.
2. Pair your car after your mobile phone detects the Bluetooth device.
3. Enter the passkey or accept the authorization popup.
4. Connect Bluetooth.NOTE:
Vehicle must be parked to complete pairing process.

Quick Reference Guide I 29
28 I Quick Reference Guide
Elantra GT HYUNDAI
MULTIMEDIA
• SOS • Navigation Services • Blue Link
BLUE LINK TELEMATICS SYSTEMBlue Link subscription is required. To enroll, please visit your dealership or
MyHyundai.com.
Press the
button to access the voice-response menu of services.
- You can say:
Service Link
Roadside Assistance
Blue Link Account Services
Help
Cancel
For vehicles equipped with factory-installed navigation, press the
button for Destination Voice Search Powered by Google
TM.
Press the
button for SOS Emergency Assistance.
Visit HyundaiBlueLink.com for more information or refer to your Blue
Link User’s Manual for detailed information on system operation.
For immediate assistance with subscription services, please call
1-855-2BLUELINK (1-855-225-8354).
Google
TM
is a registered trademark of Google, Inc.
Remote Start enables you to remotely start your vehicle from virtually
anywhere. For navigation vehicles, you can also enable climate control
remotely and turn on the rear-window defroster, ensuring a warm or cool
car is ready to go when you are.
•
To use this feature, you must have a Blue Link Personal
Identification Number (PIN). To create or change your PIN,
log on to www.MyHyundai.com.
Remote Start• Remote Start with Climate Control will automatically shut off after 10
minutes or after selected engine timer runs out in navigation vehicles.
• While this feature is active, the parking lights will blink until vehicle is
turned off or when vehicle is in operation.
• To continue operation of the vehicle, the proximity key must be inside
the vehicle with the driver prior to pressing the brake and being able to
move the gearshift from the P (Park) position.Remember:
You can download the Blue Link mobile app to your
compatible smart phone from the following sites:

• iPhone
® — Apple
® App Store
• Android
™ — Google Play
™
Scan to see list of
compatible devices and
to download the app.
Visit HyundaiBlueLink.com FAQs to
see a list of compatible devices.