2018 HONDA ACCORD SEDAN steering wheel

128
uuIndicators uDriver Information Interface Wa rning and Information Messages
Instrument Panel
MessageConditionExplanation
•Appears when the vehicle is driving out of a detected
lane. The steering wheel vibrates rapidly.
•Keep the vehicle within the lane you are driving.
2Lane Keeping Assist System (LKAS) P. 518
•Appears when the vehicle is driving out of a detected
lane.
- The steering wheel vibrates rapidly when the
vehicle is drifting out of a detected lane.
- The steering wheel vibrates rapidly when the
vehicle is drifting out of a detected lane. The system
also steers the vehicle to help you remain within
your driving lane.
• Keep the vehicle within the lane you are driving.
2Road Departure Mitigation (RDM) System P. 526
•You can change the setting for the road departure
mitigation system. Narrow, Normal , Wide , and
Warning Only can be selected.
2Customized Features P. 367, 378
•Appears when the vehicle is likely to drive out of a
detected lane.
The RDM system also steers the vehicle to help you
remain within your driving lane.—
Lane Keeping Assist System (LKAS)
Road Departure Mitigation (RDM) System
When you selected Warning Only
When you selected Narrow, Normal or Wide
Road Departure Mitigation (RDM) System
When you selected Narrow
18 ACCORD HYBRID-31TWA6000.book 128 ページ ２０１８年１月３０日　火曜日　午後７時３８分

149
uuGauges and Displays uDriver Information Interface
Continued
Instrument Panel
If two bars light up, the Driver Attention
Level Low message will appear.
If one bar lights up, the Driver Attention
Level Low. Time For A Break message will
appear, a beep will sound, and the steering
wheel will vibrate.
If this message appears, stop in a safe location
and rest for as long as needed.
The message will disappear when the left
selector wheel is presse d or when the system
has determined that the driver is driving
normally.
If the driver does not take a break and the
monitor continues to detect that the driver is
very tired, the message will appear again after
approximately 15 minutes, accompanied by a
beep and steering wheel vibrations.
The message does not appear when the
traveling time is 30 minutes or less.
18 ACCORD HYBRID-31TWA6000.book 149 ページ ２０１８年１月３０日　火曜日　午後７時３８分

157
uuGauges and Displays uHead-Up Display*
Continued
Instrument Panel
Head-Up Display*
Shows the current mode for ACC with LSF, POWER/CHARGE gauge, traffic sign
recognition system, shift position indicator, or turn-by-turn directions along with the
vehicle speed. You can choose which item to be displayed using the ( HUD)
button on the steering wheel. They are disp layed when the power mode is in ON.
To turn the head-up display on and off : Press the HUD button on the driver
side control panel.
The display can be moved up and down to come level with your eyes.
To raise or lower the head-up display : Press and hold the or button until
the desired position is reached.
34
/ Button34
HUD Button Head-Up Display
Press and hold the button
to raise the display.3
Press and hold the button
to lower the display.4
* Not available on all models
18 ACCORD HYBRID-31TWA6000.book 157 ページ ２０１８年１月３０日　火曜日　午後７時３８分

159
uuGauges and Displays uHead-Up Display*
Continued
Instrument Panel
Each time you press the (HUD) button on the steering wheel, the head-up display
content will change.
■To Change Head-Up Display Content
Head-Up Display
Current Mode for ACC
with LSF and the LKAS,
Vehicle Speed, Traffic
Sign Recognition System Vehicle Speed, Traffic
Sign Recognition
System
POWER/CHARGE Gauge, Shift
Position Indicator, Deceleration
Paddle Selector Indicator,
Vehicle Speed, Traffic Sign
Recognition System
Traffic Sign Recognition
System, Vehicle Speed
Turn-by-Turn
Directions, Vehicle
Speed, Traffic Sign
Recognition System Compass, Vehicle
Speed, Traffic Sign
Recognition System
( HUD) Button
18 ACCORD HYBRID-31TWA6000.book 159 ページ ２０１８年１月３０日　火曜日　午後７時３８分

163
Controls
This chapter explains how to operate the various controls necessary for driving.
Clock.................................................. 164
Locking and Unlocking the Doors Key Type and Functions ................... 166
Low Smart Entry Remote Signal Strength .... 167Locking/Unlocking the Doors from the Outside .......................................... 168
Locking/Unlocking the Doors from the Inside ............................................. 174
Childproof Door Locks ..................... 176
Auto Door Locking/Unlocking .......... 177
Opening and Closing the Trunk ....... 178
Security System
Immobilizer System .......................... 181 Security System Alarm...................... 181
Opening and Closing the Windows.... 184Opening and Closing the Moonroof*..... 187Operating the Switches Around the
Steering Wheel POWER Button................................. 188
Turn Signals ..................................... 191
Light Switches.................................. 191
Fog Lights
*...................................... 193
Daytime Running Lights ................... 194
Auto High-Beam .............................. 195
Wipers and Washers ........................ 198
Rear Defogger/Heated Door Mirror Button .. 200
Heated Windshield Button* ............. 200
Brightness Control ........................... 201
Driving Position Memory System
*.... 203
Adjusting the Steering Wheel .......... 205
Adjusting the Mirrors Interior Rearview Mirror ................... 206
Power Door Mirrors ......................... 207
Adjusting the Seats .......................... 208
Interior Lights/Interior Convenience
Items ................................................ 217
Climate Control System Using Automatic Climate Control .... 232
Automatic Climate Control Sensors......235
* Not available on all models
18 ACCORD HYBRID-31TWA6000.book 163 ページ ２０１８年１月３０日　火曜日　午後７時３８分

188
Controls
Operating the Switches Around the Steering Wheel
POWER Button
■Changing the Power Mode1POWER Button
POWER Button Operating Range
You can start the power system when the smart entry
remote is inside the vehicle.
The power system may also start if the smart entry
remote is close to the door or window, even if it is
outside the vehicle.
ON mode:
The button is on (in red), if the power system is on.
If the battery of the smar t entry remote is getting
low, the power system may not start when you press
the POWER button. If the power system does not
start, refer to the following link. 2 If the Smart Entry Remote Battery is Weak
P. 637
Do not leave the power mode in ACCESSORY or ON
when you get out.
Operating Range
VEHICLE OFF (LOCK)
The button is off.
The power to all electrical components is turned
off.
Press the button.
Without pressing
the brake pedal ACCESSORY
The button blinks (in red).
Operate the audio system and other accessories in
this position.
ON
The button blinks (in red).
All electrical components can be used.
18 ACCORD HYBRID-31TWA6000.book 188 ページ ２０１８年１月３０日　火曜日　午後７時３８分

189
uuOperating the Switches Around the Steering Wheel uPOWER Button
Continued
Controls
If you leave the vehicle for 30 to 60 minutes with the transmission in (P and the
power mode in ACCESSORY, the vehicle automa tically goes into the mode similar to
VEHICLE OFF (LOCK) to avoid draining the 12-volt battery.
If you open the driver’s door when the power mode is in ACCESSORY, a warning
beep sounds.
■Automatic Power Off
■Power Mode Reminder
18 ACCORD HYBRID-31TWA6000.book 189 ページ ２０１８年１月３０日　火曜日　午後７時３８分

uuOperating the Switches Around the Steering Wheel uPOWER Button
190
Controls
Warning buzzers may sound from inside and/
or outside the vehicle to remind you that the
smart entry remote is out of the vehicle. If the
buzzer continues even after the remote is put
back inside, place it to be within its
operational range.
■When the power mode is in ON
If the smart entry remote is taken out of the
vehicle, and the driver’s door is closed, a
warning buzzer sounds from both inside and
outside the vehicle. A warning message on
the driver information interface notifies the
driver inside that the remote outside of the
vehicle.
■When the power mode is in
ACCESSORY
If the smart entry remote is taken out of the
vehicle, and all the doors are closed, a
warning buzzer sounds from outside the
vehicle.
■Smart Entry Remote Reminder1 Smart Entry Remote Reminder
When the smart entry remote is within the system’s
operational range, and the driv er’s door is closed, the
warning function cancels.
If the smart entry remote is taken out of the vehicle
after the power system has been turned on, you can
no longer change the POWER button mode or
restart the power system. Always make sure if the
remote is in your vehi cle when you operate the
POWER button.
Removing the smart entry remote from the vehicle
through a window does not activate the warning
buzzer.
Do not put the smart entr y remote on the dashboard
or in the glove box. It may cause the warning buzzer
to activate. Under some other conditions that can
prevent the vehicle from locating the remote, the
warning buzzer may also activate even if the remote
is within the system’s operational range.
18 ACCORD HYBRID-31TWA6000.book 190 ページ ２０１８年１月３０日　火曜日　午後７時３８分