4
Quick Reference Guide
Quick Reference Guide
Visual Index
❙POWER Button (P 188)
❙Climate Control System (P 232)
❙Center Pocket (P 219)
❙Safety Support Switch (P 496, 528)
❙Parking Sensor System Button* (P 549)
❙Hazard Warning Button
❙Acoustic Vehicle Alerting System OFF Button (P 476)
Canadian models
❙Brightness Control (P 201)
❙TRIP Button (P 137)
❙Head-Up Display (HUD) Buttons* (P 157)
❙System Indicators (P 82)
❙Gauges (P 133)
❙Driver Information Interface (P 135)
❙Audio System (P 246, 267)
❙Navigation System*
() See Navigation System Manual
❙Front Seat Heater Buttons* (P 229)
❙Front Seat Heaters and Seat Ventilation
Buttons* (P 230)
❙Rear Window Defogger (P 200)
❙Heated Door Mirror Button (P 200)
❙ (Vehicle Stability Assist ® (VSA ®) System OFF) Button (P 479)
❙Heated Windshield Button (P 200)
Canadian models
18 ACCORD HYBRID-31TWA6000.book 4 ページ 2018年1月30日 火曜日 午後7時38分
82
Instrument Panel
Indicators
Deceleration Paddle
Selector IndicatorP.90
Parking Brake and
Brake System Indicator
(Red)
Parking Brake and
Brake System Indicator
(Amber)
U.S.
Canada
U.S.
Canada Automatic Brake Hold
System Indicator
Automatic Brake Hold
IndicatorU.S.
Canada
*1 : When you set the power mode to ON, these indicators come on to indicate that system checks are being performed. They go off a few seconds later or after the power
system has started. If an indicator does not come on or turn off, there may be a malfunction in the corresponding system. To re solve the issue, follow the instructions in
the owner’s manual.
P. 83*1
Malfunction Indicator
Lamp
12-Volt Battery
Charging System
Indicator
Anti-lock Brake System
(ABS ) Indicator
Seat Belt Reminder
Indicator
Low Fuel Indicator
Vehicle Stability Assist®
(VSA®) System Indicator
Vehicle Stability Assist
®
(VSA®) OFF Indicator
Supplemental Restraint
System Indicator
Auto High-Beam
Indicator
Low Tire Pressure/TPMS
Indicator Electric Power Steering
(EPS) System Indicator
Turn Signal and Hazard
Warning Indicators
Lights On Indicator High Beam Indicator
Fog Light Indicator*
ECON Mode Indicator
System Message
Indicator
SPORT
Mode Indicator
Adaptive Cruise Control
( ACC ) with Low Speed
Follow (LSF) Indicator
(Amber)
Lane Keeping Assist
System ( LKAS)
Indicator (Amber)
Safety Support
Indicator (Amber)
Safety Support
Indicator (Green/Gray)
P. 84
P.88
P.88
P.89
P.90
*1
*1
*1 *1
P.
96
*1
*1
Shift Position IndicatorP.90
Transmission System
Indicator
P. 91
READY Indicator
P.87
POWER SYSTEM
Indicator
P. 86
P.92
P.92
P.93
P.93
P.93
P.94
*1
*1
*1
*1
P.95
*1P.95
P.97
P.102
*1
P.97
P.97
P.100
P.97
Immobilizer System
Indicator
P. 98
Security System Alarm
Indicator P.98
P.99
P.101
P.103
P.104
P.107
*1
Adaptive Cruise Control
(ACC ) with Low Speed
Follow (LSF) Indicator
(Green)
P. 102
Lane Keeping Assist
System ( LKAS)
Indicator (Green)P. 103
*1
*1
EV IndicatorP.87*1
EV Mode IndicatorP.87*1 *1
* Not available on all models
18 ACCORD HYBRID-31TWA6000.book 82 ページ 2018年1月30日 火曜日 午後7時38分
84
uuIndicators u
Instrument Panel
IndicatorNameOn/BlinkingExplanationMessage
Parking Brake
and Brake
System
Indicator
(Amber)
•Comes on if there is a problem with
a system related to braking other
than the conventional brake
system.
• Comes on if there is a problem with
the cooperative control with
regenerative braking, the electric
servo brake system, or the hill start
assist system.
• Comes on if there is a problem with
the electric parking brake system.•Stays on constantly - Have your vehicle
checked by a dealer.
• Comes on while driving - Avoid using
the parking brake and have your vehicle
checked by a dealer immediately.
• With this indicator on, your vehicle still
has normal braking ability.
• Comes on if there is a problem with
the radar sensor.
• Indicator may come on temporarily
when the Maximum Load Limit is
exceeded.•Make sure the total load is within the
Maximum Load Limit.
2 Maximum Load Limit P. 455
U.S.
Canada
(Amber)
U.S.
Canada
18 ACCORD HYBRID-31TWA6000.book 84 ページ 2018年1月30日 火曜日 午後7時38分
uuOperating the Switches Around the Steering Wheel uAuto High-Beam
196
Controls
To activate the system, turn the headlight
switch to AUTO and then set the headlights
to low beam. The auto high-beam indicator
will come on.
2 Light Switches P. 191
The high beams remain on unless:
•You have been driving below 15 mph (24 km/h) for an extended amount of time.
• The speed of the vehicle drops below 6 mph (10 km/h).
• The windshield wipers have been running at a high speed for more than a few
seconds.
• You enter a well lit location.
The high beams come back on once the condition that caused them to turn off no
longer exists.
If needed, you can temporar ily turn the system off manually. Turn on the high
beams by pushing the lever forward until yo u hear a click, or flash the high beams
once by pulling the lever toward you. To turn the system back on, pull and hold the
lever toward you for a few seconds.
■Operating the System1 Operating the System
For the auto high-beam to work properly:
•Do not place an object that reflects light on the
dashboard.
•Keep the windshield around the camera clean.
When cleaning the windshield, be careful not to
apply the windshield cleans er to the camera lens.
•Do not attach an object or film to the area around
the camera.
•Do not touch the camera lens.
If the camera receives a st rong impact, or repairing of
the area near the camera is required, consult a dealer.
If the Some Driver Assist Systems Cannot
Operate: Camera Temperature Too High message
appears:
•Use the climate control system to cool down the
interior and, if necessary, also use defroster mode
with the air flow directed toward the camera.
•Start driving the vehicle to lower the windshield
temperature, which cool s down the area around
the camera.
If the Auto High-Beam Cannot Operate: Clean
Windshield message appears:
•Park your vehicle in a sa fe place, and clean the
windshield. If the message does not disa ppear after
you have cleaned the windshield and driven for a
while, have your vehicle checked by a dealer.
Headlight Switch
18 ACCORD HYBRID-31TWA6000.book 196 ページ 2018年1月30日 火曜日 午後7時38分
Continued323
uuAudio System Basic Operation uHondaLink® Service*
Features
■Manual operator connection
If you need to talk to the HondaLink ® operator
in a situation where no airbag has deployed,
you can manually connect to them by pressing
the ASSIST button with the power mode in
ACCESSORY or ON.
1. Open the cover attached to the ceiling
console.
2. Press the ASSIST button.
u You are connected to the HondaLink ®
operator.1 Manual operator connection
Do not press the button while driving. When you
need to contact the operato r, park the vehicle in a
safe place.
If the unit fails to connect to the operator, it
automatically cancels the action after three minutes.
If necessary, the cover can be broken to access the
ASSIST button.
ASSIST Button
18 ACCORD HYBRID-31TWA6000.book 323 ページ 2018年1月30日 火曜日 午後7時38分
427
uuBluetooth ® HandsFreeLink ®u HFL Menus
Continued
Features
HFL Menus
The power mode must be in ACCESSO RY or ON to use the system.
■Phone settings screen
1.Press the button.
2. Select Phone .
3. Select Settings .
1HFL Menus
To use HFL, you must first pair your Bluetooth-
compatible cell phone to th e system while the vehicle
is parked.
Some functions are li mited while driving.
Change Devices
(Existing entry list)
+ Connect New DevicePair a new phone to the system.
Connect, disconnect, or delete a paired device.
RingtoneSelect the ring tone.
Auto Sync PhoneSet phonebook and call history data to be automatically imported when a phone is paired to HFL.
Turn HondaLink® Assist on and off.
HondaLink Assist*
Auto Phone Call TransferSet calls to automatically transfer from your phone to HFL when you enter the vehicle.
* Not available on all models
18 ACCORD HYBRID-31TWA6000.book 427 ページ 2018年1月30日 火曜日 午後7時38分
451
Driving
This chapter discusses driving and refueling.
Before Driving................................... 452
Towing a Trailer ................................ 457
When Driving Turning on the Power ...................... 458
Precautions While Driving................. 464
Transmission .................................... 464
Shifting ............................................ 465
SPORT Mode.................................... 471
Deceleration Paddle Selector ............ 472
ECON Button ................................... 475
Acoustic Vehicle Al erting System ...... 476
Adaptive Damper System
*............... 477Vehicle Stability Assist® (VSA®), aka Electronic
Stability Control (ESC), System .............. 478
Agile Handling Assist ....................... 480
Tire Pressure Monitoring System (TPMS) .. 481
Tire Pressure Monitoring System (TPMS) -
Required Federal Explanation ......... 484
Blind spot information (BSI) System*... 486High Voltage Battery ........................ 489
LaneWatchTM*.................................. 490
Honda SensingTM
Collision Mitigati on Braking SystemTM
(CMBSTM) ....................................... 493
Adaptive Cruise Control (ACC) with Low
Speed Follow (LSF) ......................... 502
Lane Keeping Assist System (LKAS) .. 518
Road Departure Mitigation (RDM) System.... 526
Traffic Sign Recognition System ....... 530
Front Sensor Camera ....................... 536
Radar Sensor ................................... 538
Braking Brake System ................................... 539
Anti-lock Brake System (ABS) ........... 546
Brake Assist System ......................... 547
Parking Your Vehicle ........................ 548
Multi-View Rear Camera .................. 558
Refueling ........................................... 561
Fuel Economy and CO
2 Emissions .... 564
* Not available on all models
18 ACCORD HYBRID-31TWA6000.book 451 ページ 2018年1月30日 火曜日 午後7時38分
463
uuWhen Driving uTurning on the Power
Driving
1. While depressing the brake pedal, press the POWER button.
2. Keeping your right foot on th e brake pedal, check that the READY indicator is on,
then press the
(D button. Select (R when reversing.
3. With the parking brake applied, release the brake pedal and gently depress the
accelerator pedal.
u Make sure the electric parki ng brake indicator goes off.
2Parking Brake P. 539
2 If the Transmission System Indicator Blinks along with the Warning
Message P. 650
■Hill start assist system
Hill start assist keeps the brake engaged br iefly to help prevent the vehicle from
rolling on inclines as you move your foot from the brake pedal to the accelerator.
Put the transmission into
(D when facing uphill, or (R when facing downhill, then
release the brake pedal.
■Starting to Drive1 Starting to Drive
The power system is off wh en the shift position is
changed from
( P before the POWER button is
pressed. Follow the step 1 when starting to drive.
You can also release the parking brake by pressing
the electric parking brake sw itch while depressing the
brake pedal.
When facing downhill, y ou can start your vehicle
more smoothly by manually releasing it with the
electric parking brake switch than by releasing it with
the accelerator pedal.
When the power system is turned on using the
button on the smart entry remoteWhen the power system is turned on using the button on the smart entry remote
When the power system is turned on in any case
1 Hill start assist system
Hill start assist may not prevent the vehicle from
rolling downhill on a very stee p or slippery slope, and
does not operate on small inclines.
Hill start assist is not a replacement for the parking
brake.
As a hybrid vehicle, the sounds and vibrations from
the engine may be absent even though the vehicle is
ready for driving. It also makes you fail to recognize
that you can start.
Make sure to check if the READY indicator is on
before you start to drive.
18 ACCORD HYBRID-31TWA6000.book 463 ページ 2018年1月30日 火曜日 午後7時38分