2018 HONDA ACCORD SEDAN Owner's Manual (in English)

103
uuIndicators u
Continued
Instrument Panel
IndicatorNameOn/BlinkingExplanationMessage
Lane Keeping
Assist System
(LKAS )
Indicator
(Amber)• Comes on if there is a problem with
the LKAS.•Stays on constantly - Have your vehicle
checked by a dealer.
Lane Keeping
Assist System
( LKAS )
Indicator
(Green)• Comes on when you press the
MAIN button.
2Lane Keeping Assist System (LKAS)
P. 518—
18 ACCORD HYBRID-31TWA6000.book 103 ページ ２０１８年１月３０日　火曜日　午後７時３８分

104
uuIndicators u
Instrument Panel
IndicatorNameOn/BlinkingExplanationMessage
Safety Support
Indicator
(Amber)
•Comes on if there is a problem with
RDM, CMBSTM, or BSI*.
•Stays on constantly - Have your vehicle
checked by a dealer.
• Indicator may come on temporarily
when the Maximum Load Limit is
exceeded.•Make sure the total lo ad is within the
Maximum Load Limit.
2 Maximum Load Limit P. 455
•Comes on if the RDM and CMBSTM
are deactivated temporarily after
the 12-volt battery has been
disconnected and then re-
connected.• Drive a short distance at more than 12
mph (20 km/h). The indicator should go
off. If it does not, have your vehicle
checked by a dealer.
* Not available on all models
18 ACCORD HYBRID-31TWA6000.book 104 ページ ２０１８年１月３０日　火曜日　午後７時３８分

105
uuIndicators u
Continued
Instrument Panel
IndicatorNameOn/BlinkingExplanationMessage
Safety Support
Indicator
(Amber)
•Comes on when RDM and/or
CMBSTM shuts itself off.
• Indicator may come on temporarily when
passing through an encl osed space, such
as tunnel.
• The area around the radar sensor is
blocked by dirt, mud, etc. Stop your
vehicle in a safe place and wipe the debris
off with a soft cloth.
• Have your vehicle checked by a dealer if
the indicator does not go off even after
you have cleaned the radar sensor.
2 Collision Mitigation Braking
SystemTM (CMBSTM) P. 493
• Stays on - The temperature inside the
camera is too high.
Use the climate contro l system to cool
down the camera.
The system acti vates when the
temperature inside the camera cools
down.
2 Front Sensor Camera P. 536
18 ACCORD HYBRID-31TWA6000.book 105 ページ ２０１８年１月３０日　火曜日　午後７時３８分

106
uuIndicators u
Instrument Panel
IndicatorNameOn/BlinkingExplanationMessage
Safety Support
Indicator
(Amber)
•Comes on when RDM and/or
CMBSTM shuts itself off.
•Stays on - The area around the camera is
blocked by dirt, mud, etc. Stop your
vehicle in a safe place and wipe the debris
off with a soft cloth.
• Have your vehicle checked by a dealer if
the indicator and message are still
displayed even after you have cleaned the
area around the camera.
2 Front Sensor Camera P. 536
•Comes on when mud, snow, or ice
has accumulated in the vicinity of
the BSI sensor.
•Comes on while driving - Something
may be interfering with the BSI sensor.
Check the vicinity of the BSI sensor and
remove any obstacles.
2 Blind spot information (BSI) System*
P. 486
Models with BSI
* Not available on all models
18 ACCORD HYBRID-31TWA6000.book 106 ページ ２０１８年１月３０日　火曜日　午後７時３８分

107
uuIndicators u
Instrument Panel
IndicatorNameOn/BlinkingExplanationMessage
Safety Support
Indicator
(Green/Gray)
•Lights up in green when RDM,
CMBSTM, and BSI* are on.
• Lights up in green and gray when
RDM, CMBS
TM, or BSI* or any two
of these systems are off.
• Lights up in gray when RDM,
CMBS
TM, and BSI* are off.
2 RDM On and Off P. 528
2 CMBSTM On and Off P. 496
2 BSI On and Off P. 488
* Not available on all models
18 ACCORD HYBRID-31TWA6000.book 107 ページ ２０１８年１月３０日　火曜日　午後７時３８分

108
uuIndicators uDriver Information Interface Wa rning and Information Messages
Instrument Panel
Driver Information Interface Warning and Information Messages
The following messages appear only on the driver information interface. Press the (home) button, select Warnings , then press the left
selector wheel to see the message again with the system message indicator on.
MessageConditionExplanation
•Appears when the vehicle is no longer able to run
due to a malfunction.•Immediately stop in a safe place.
• Have your vehicle checked by a dealer immediately.
• Appears when there is a risk that the vehicle will
move unexpectedly after you have stopped due to a
malfunction with the vehicle.•While the vehicle is stoppe d, apply the parking brake.
• Have your vehicle checked by a dealer.
• Appears when you set the power mode to ON again
and the vehicle is able to run.
2 Turning on the Power P. 458
18 ACCORD HYBRID-31TWA6000.book 108 ページ ２０１８年１月３０日　火曜日　午後７時３８分

109
uuIndicators uDriver Information Interface Wa rning and Information Messages
Continued
Instrument Panel
MessageConditionExplanation
•Appears if any door or the trunk is not completely
closed.
• Appears if any door or the trunk is opened while
driving. The beeper sounds.•Disappears when all doors and the trunk are closed.
18 ACCORD HYBRID-31TWA6000.book 109 ページ ２０１８年１月３０日　火曜日　午後７時３８分

110
uuIndicators uDriver Information Interface Wa rning and Information Messages
Instrument Panel
MessageConditionExplanation
•Appears when the engine oil pressure is low.•Appears while driving - Immediately stop in a safe
place.
2 If the Low Oil Pressure Symbol Appears P. 644
•Appears if there is a problem with the shutter grille,
and the radiator coolant temperature is too high.•Power output will be reduced, so you may not be able
to accelerate or maintain yo ur current speed. Have your
vehicle checked by a dealer.
• Appears when the washer fluid is low.
•Refill the washer fluid.
2 Refilling Window Washer Fluid P. 588
•Appears when the scheduled maintenance is due
soon.
• Consequently, Maintenance Due Now and
Maintenance Past Due follow.
2Maintenance Minder Messages on the Driver
Information Interface P. 571
Canadian models
18 ACCORD HYBRID-31TWA6000.book 110 ページ ２０１８年１月３０日　火曜日　午後７時３８分