2018 FORD FUSION ENERGI tow

[x] Cancel search: tow

Page 290 of 538

FORD FUSION ENERGI 2018  Owners Manual 4. Wrap the dual purpose hose (blacktube) around the channel on thebottom of the housing/casing.
5. Wrap the power cord around thehousing and stow the accessory powerplug into its storage area.
Note:I

Page 300 of 538

FORD FUSION ENERGI 2018  Owners Manual Inspecting Your Tires andWheel Valve Stems
Periodically inspect the tire treadsfor uneven or excessive wear andremove objects such as stones,nails or glass that may be wedgedin the tread grooves. Chec

Page 303 of 538

FORD FUSION ENERGI 2018  Owners Manual It is recommended that the twofront tires or two rear tiresgenerally be replaced as a pair.
The tire pressure sensors mountedin the wheels (originally installedon your vehicle) are not designedto be u

Page 320 of 538

FORD FUSION ENERGI 2018  Owners Manual GENERAL INFORMATION
Radio Frequencies and ReceptionFactors
AM and FM frequencies are established bythe Federal Communications Commission(FCC) and the Canadian Radio andTelecommunications Commission (C

Page 332 of 538

FORD FUSION ENERGI 2018  Owners Manual Note:This receiver includes the eCosreal-time operating system. eCos ispublished under the eCos License.
Satellite Radio Reception Factors
Potential satellite radio reception issues
For optimal recept

Page 333 of 538

FORD FUSION ENERGI 2018  Owners Manual Troubleshooting
ActionConditionMessage
No action required. Thismessage should disappearshortly.
Radio requires more thantwo seconds to produceaudio for the selectedchannel.
Acquiring…
If this messag

Page 397 of 538

FORD FUSION ENERGI 2018  Owners Manual Action and descriptionMenu item
Replay audio on the current channel. You can replay approx-imately 45 minutes of audio as long as you remain tuned tothe current station. Changing stations erases the p

Page 398 of 538

FORD FUSION ENERGI 2018  Owners Manual Troubleshooting tips
ActionCauseMessage
No action required. Thismessage should disappearshortly.
Radio requires more than twoseconds to produce audio forthe selected channel.
Acquiring Signal
If this