2018 FIAT 500 steering wheel adjustment

7
INSTRUMENT PANEL
KNOWING YOUR CAR
1a
A direction indicator stalk – B audio controls on steering wheel – C instrument panel – D headlight alignment corrector – E audio controls on
steering wheel – F windscreen wiper/washer and rear window wiper/washer stalk – G dualdrive power steering (CITY function)
H display: audio system/Uconnect™ – I central air diffusers – L fog lights/rear fog lights – M passenger airbag – N side air diffusers
O glove box – P emergency lights and switch – Q climate control system controls – R right electric window – S gear lever
T left electric window – U ASR-OFF button– V ignition switch – Z driver airbag – X steering wheel adjustment lever – W Cruise Control/Speed
Limiter lever
DVDF0S0219c

KNOWING YOUR CAR
8
DASHBOARD WITH SPORT STEERING WHEEL
1b
A direction indicator stalk – B audio controls on steering wheel – C instrument panel – D headlight alignment corrector – E audio controls on
steering wheel – F windscreen wiper/washer and rear window wiper/washer stalk – G dualdrive power steering (CITY function)
H display: audio system/Uconnect™ – I central air diffusers – L fog lights/rear fog lights – M passenger airbag – N side air diffusers
O glove box – P emergency lights and switch – Q climate control system controls – R right electric window – S gear lever
T left electric window – U ASR-OFF button– V ignition switch – Z driver airbag – X steering wheel adjustment lever – W Cruise Control/Speed
Limiter lever
DVDF0S0220c

29
STEERING WHEEL LOCK
2)
Engagement:when the key is in
position STOP, remove the key and
turn the steering wheel until it is locked.
Disengagement:move the steering
wheel slightly as you turn the ignition
key to MAR.
Height adjustment: operate lever
B-fig. 13 to lift or lower the rear part of
the cushion to achieve the most
comfortable driving position.
Backrest folding: To fold the
backrest over, adjust lever D-fig. 14
(movement 1) and push the backrest
forwards until it locks (movement 2);
release lever D and, pushing the
backrest, slide the seat forwards
(movement 3).
13DVDF0S013c
SEATS 3) 4) 2)
FRONT SEATS
Longitudinal adjustment: lift lever
A-fig. 11 and push the seat forwards
and backwards to reach the required
position.
Backrest angle adjustment: rotate
the knob C-fig. 12.
11DVDF0S012c
12DVDF0S014c

31
STEERING WHEEL
2) 3)
The steering wheel angle adjustment
lever A-fig. 18 is located on the steering
column under the direction indicator
lever.
❒ Bring the lever downwards to unlock
the steering column.
❒ Adjust the steering column to the
most suitable position.
❒ Bring the lever upwards to lock it in
this position.
REAR-VIEW
MIRRORS 6)
INTERIOR MIRROR
The mirror is fitted with a safety device
that causes its release in the event of a
violent impact with the passenger.
Lever A fig. 19 can be used to move
the mirror to two different positions:
normal or antiglare.
REAR HEAD
RESTRAINTS (removal)
(for versions/markets, where provided)
Proceed as follows to remove the head
restraints:
❒ Raise lever A or B fig. 17 (both for
one-piece seat), unlock the
backrest and tilt it toward the
passenger compartment;
❒ raise the head restraints to their
maximum height;
❒ press buttons A and B fig.16 at the
side of the two supports, then
remove the head restraints by
pulling them upwards.
17DVDF0S145c
18DVDF0S173c
19DVDF0S106c

KNOWING YOUR CAR
38
With the windscreen wiper on and
reverse gear engaged, rear window
wiping will be continuous in the same
way.
“Smart washing” function
❒ Push the lever towards the
dashboard and hold it in position to
activate the rear window washer jet.
RAIN SENSOR
(for versions/markets, where provided)
4)
The sensor will be activated when the
ignition device is turned to MAR, and
will be deactivated in the STOP
position.
29DVDF0S0217c
This is a device located behind the
interior rear view mirror fig. 30, in
contact with the windscreen. It can
measure the amount of rain and,
consequently, control the automatic
windscreen wiping mode depending
on the amount of water on the
windscreen.
IMPORTANT Keep the window clean in
the sensor area.
AUTOMATIC WIPING
(for versions/markets, where provided)
Activation
The user can choose automatic wiping
by moving the right steering wheel
stalk fig. 28 to the AUTO (B) position.
The activation of the automatic wiping
will be notified to the driver by a single
stroke.
30DVDF0S0215c
Sensitivity Adjustment
The rain sensor sensitivity can be
adjusted through the display menu or
on the UconnectTM 5" or 7” system.
Inhibition
If the starter switch is moved to the
STOP position, leaving the right
steering wheel stalk in the AUTO (B)
position, when the vehicle is next
started (starter switch in the MAR
position), no wiping cycle to prevent
damage to the system if the
windscreen is being washed manually
or if there is ice on it.
To re-enable the automatic wiping
mode:
❒ Put the right steering wheel stalk in
a position other than AUTO and
then back to the AUTO position;
❒ exceed the speed of 5 km/h when
the sensor detects rain.
Deactivation
The user can disable automatic wiping
by moving the right steering wheel
stalk to a position other than AUTO.

KNOWING YOUR CAR
90
❒ search forUconnect™on the
Bluetooth®audio device (during
the pairing stage a screen is
displayed showing the progress of
the operation);
❒ when requested by the audio
device, enter the PIN code shown
on the system display or confirm on
the device the PIN displayed;
❒ when the pairing procedure has
completed successfully, the user
will be asked “Make this your
favourite?”. If “Yes” is selected in
response to the question, the
Bluetooth®device will be
registered as the favourite (the
device will have a higher priority
than the others paired
subsequently). If "No" is selected,
the priority is determined according
to the order of connection. The last
device connected will have the
highest priority;
❒ an audio device can also be paired
by pressing the “Phone” graphic
button on the display and by
selecting “Settings” or, from the
“Settings” menu, selecting
“Phone/Bluetooth®”.IMPORTANT If the Bluetooth®
connection between mobile phone and
system is lost, consult the mobile
phone handbook.
NOTE: The Radio may change the
track being played by modifying the
name-device in the Bluetooth settings
of the phone (where provided), if the
device is connected via USB after the
Bluetooth connection.
USB SOURCE
To activate the USB mode, insert the
corresponding device into the USB
port on the central console.
If a USB device is inserted with
the system on, this starts playing the
tracks present on the device.
AUX SOURCE
(where provided)
To activate AUX mode, insert an
appropriate device in the AUX socket
on the vehicle.
Inserting a device with AUX output
socket, the system starts playing the
connected AUX source if it not already
playing. Adjust the volume using the
button/knob
gon the front panel or
using the volume adjustment control
on the connected device.
The “AUX Volume Offset”
(where provided) function can be
selected in Radio mode only when the
AUX source is active.
IMPORTANTThe functions of the
device connected with the AUX socket
are directly managed by the device
itself: it is not possible to change
track/folder/playlist or control playing
start/end/pause with the controls on
the front panel or on the steering
wheel.
Do not leave the cable of your portable
player connected to the AUX socket
after disconnection, to avoid possible
hiss from the speakers.

IN AN EMERGENCY
128
BUMP STARTING13)
Never bump start the engine by
pushing, towing or driving downhill.
This could cause fuel to flow into the
catalytic converter and damage it
beyond repair.
IMPORTANT Remember that the
brake servo and electrical power
steering system (where provided) are
not operational until the engine is
started, a greater effort will therefore
be required to press the brake pedal
or turn the steering wheel.
CHANGING A
WHEEL 32) 30)
JACK
Please note that:
❒ the jack weighs 1.76 kg;
❒ the jack requires no adjustment;
❒ the jack cannot be repaired; if it
breaks, it must be replaced with a
new one of the same type;
❒ no tool other than its cranking
device may be fitted on the jack.
SERVICING
❒ prevent any dirt from depositing on
the “worm screw”
❒ keep the “worm screw” lubricated
❒ never modify the jack.
CONDITIONS OF NON-
USE
❒ at temperatures lower than -40°C
on a sandy or muddy ground
❒ on uneven ground
❒ on a road with steep gradient
❒ in extreme weather conditions:
thunderstorms, typhoons,
hurricanes, blizzards, storms, etc.
❒ in direct contact with the engine or
to carry out repairs under the
vehicle
❒ on boats.
RAISING WITH A JACK
AND REPLACING A
WHEEL
To change a wheel, proceed as
follows:
❒ Stop the car in a position that is
not dangerous for oncoming traffic
where you can change the wheel
safely. The ground must be flat and
sufficiently compact.
❒ Turn the engine off and pull up the
handbrake.
❒ Engage first gear or reverse.
❒ Lift up the luggage compartment
mat and loosen the central locking
device A - fig. 99.
❒ Take out the tool container
B and take it near to the wheel to
be changed.
❒ Take the space-saver wheel C.

PERSONAL SAFETY
187
IMPORTANT INFORMATION AND
RECOMMENDATIONS
3) ADJUSTMENTS
Any and all adjustments to seats, head restraints, steering wheel or
rear view mirrors must be performed exclusively with the
vehicle stationary and the engine off.
4) SEATS
•If a side bag is fitted, it is dangerous to use
seat covers not available from Lineaccessori MOPAR
®.
•Once you have released the adjustment lever, always check that
the seat is locked on the guides by trying to move it back and
forth. If the seat is not locked into place, it may unexpectedly slide
and cause the driver to lose control of the car.
5) HEAD RESTRAINTS
• All adjustments must be carried out only with the car stationary
and engine off. The head restraints should be adjusted to support
the back of your head and not your neck. Only in this position do
they exert their protective action.
• To make the best use of the protective action of the head
restraints, adjust the backrest so that you are sitting upright and
keep your head as close as possible to the head restraint.
6) REAR VIEW MIRRORS
As door mirrors are curved, they may slightly alter the perception
of distance. When driving, these mirrors must always be in the
open position.
We recommend you carefully read the following environmental information.
In an emergency we recommend that you call the toll-free phone number found in the Warranty Booklet.
Go to the www.fiat500.com website to locate the Fiat Dealership closest to you.
(CONTINUES)
1) THE KEYS
Press button B fig. 9 only with the key away from your body,
especially your eyes and from objects which could get damaged
(e.g. your clothes).
Do not leave the key unattended to avoid the button being
accidentally pressed while it is being handled, e.g. by a child.
2) STARTING DEVICE
• Never remove the key while the car is moving.
The steering wheel will automatically lock as soon as it is turned.
This holds true for cars being towed as well.
• It is absolutely forbidden to carry out any after-market operation
involving steering system or steering column modifications
(e.g. installation of anti-theft device) that could adversely affect
performance and safety, invalidate the warranty and also result in
non-compliance of the vehicle with type-approval requirements.
•If the ignition device has been tampered with
(e.g. an attempted theft), have it checked over by a Fiat
Dealership before driving again.
•Always remove the key when you leave your car to prevent
someone from accidentally operating the controls.
Remember to engage the handbrake.
If the car is parked on a slope uphill, engage the first gear; if the
car is facing downhill, engage the reverse gear. Never leave
children unattended in the vehicle.