2018 FIAT 500 fuel

25
It is possible to move along the setup
menu list by pressing the
+ or – buttons once. Operating
modes are different according to the
characteristics of the option selected.
The menu comprises the following
functions:
❒ DIMMER
❒ SPEED BUZZER
❒ TRIP B ACTIVATION/DATA
❒ SET TIME
❒ SET DATE
❒ AUTOCLOSE
❒ UNITS
❒ LANGUAGE
❒ BUZZER VOLUME
❒ BUTTON VOLUME
❒ SEAT BELT BUZZER
❒ SERVICE
❒ AIRBAG/PASSENGER BAG
❒ DAY LIGHTS
❒ ITPMS RESET
❒ RADIO REPETITION
(for markets/versions, where
provided)
❒ SEE PHONE (for markets/versions,
where provided)
❒ SEE NAVIGATION
(for markets/versions, where
provided)
❒ EXIT MENUTRIP COMPUTER
The Trip computer is used to display
information on car operation when the
key is turned to MAR.
This function includes two separate
trips, namely “Trip A”
and “Trip B”.
Both functions can be reset (reset
means start of a new journey).
“Trip A” may be used to display values
relating to: range (for versions/markets,
where provided), travel distance,
average fuel consumption (for
versions/markets, where provided),
current consumption (for
versions/markets, where provided),
average speed, travel time.
“Best average consumption": in ECO
mode, displays a screen summarising
the best average consumption (where
provided). The icon indicates the
best performance. This information can
be reset by resetting Trip A.
“Trip B” may be used to display the
following values to be displayed: range,
travel distance B, average fuel
consumption B
(for versions/markets, where provided),
average speed B,
travel time B.
SET TIME (SETTING THE
CLOCK)
The time is set through the
multifunction display.
❒ Press the MENU button; the
following two submenus are shown
on the display: “Time” and
“Format”.
❒ Press the + or – button to move
between the two submenus.
❒ Select the required option and
press the MENU button.
❒ When you select the “Clock”
submenu, pressing the MENU
button briefly makes the “hours”
flash on the display.
❒ Press the button + or – to carry out
the adjustment.
❒ Having set the time, briefly press
the MENU button: the
“minutes” will flash on the display.
Set the minutes
using the same procedure as for
the hours.
❒ Having set the time, press and hold
down the MENU button.
–
–
–
–
–

27
HEADLIGHT
ALIGNMENT
With the ignition key at MAR and
dipped beam headlights on, press the
+ button to adjust the headlights
upwards and the – button to adjust the
headlights downwards.
TYRE RESET (ITPMS
RESET)
(for versions/markets, where provided)
With this function it is possible to reset
the iTPMS (see paragraph “iTPMS”). To
carry out the Reset procedure proceed
as follows:
❒ briefly press the MENU
N; the
display will show “Reset”;
❒ press button + or – to select (“Yes”
or “No”); a dedicated reset
confirmation message will appear;
❒ briefly press the MENU
N; the
display will show “Confirm”;
THE KEYS1)
1) 1)
CODE CARD
(for versions/markets, where provided)
The car is delivered with two copies of
the ignition key and with the CODE
card fig. 7 which bears the following:
A: the electronic code;
B: the mechanical key code to be given
to the Fiat Dealership when ordering
duplicate keys.
You should have the electronic code
with you at all times.
IMPORTANT All the keys and the
CODE card must be handed over to
the new owner when selling the car.
MECHANICAL KEY
The metal insert A-fig. 8 operates:
❒ the ignition switch;
❒ the door locks and the tailgate (for
versions/markets, where provided);
❒ the locking/unlocking of the fuel
cap.
KEY WITH REMOTE
CONTROL
(for versions/markets, where provided)
The metal insert A-fig. 9 operates:
❒ the ignition switch;
❒ the door locks;
❒ the locking/unlocking of the fuel
cap.
7DVDF0S0103c
8DVDF0S0104c

47
CONTROLS 17)
DUALDRIVE ELECTRIC
POWER STEERING
(for versions/markets, where provided)
❒ With the key in MAR position,
press the Dualdrive button
A-fig. 47 to activate the CITY
function.
The word CITY will come on in the
instrument panel.
❒ With the CITY function the effort on
the steering wheel is lighter, thereby
facilitating parking manoeuvres.
❒ Press the button again to turn the
function off.
47DVDF0S179c
ECO FUNCTION
(for versions/markets, where provided)
❒ With the ignition key at MAR, press
the ECO B button – fig. 47 to
activate the function. The word
ECO on the display will light up or,
according to the version, a
dedicated screen will be displayed.
❒ When the function is activated, the
car is set for city driving,
characterised by less effort on the
steering wheel (Dualdrive system
on) and reduced fuel consumption.
❒ Press the button again to
deactivate the function.
This function is stored and, at the next
starting, the system keeps the setting it
had before the engine was shut down.
SPORT FUNCTION
(for versions/markets, where provided)
❒ With the ignition key at MAR, press
the SPORT C button – fig. 47 to
activate the function. The word
SPORT on the display will light up
or, according to the version, a
dedicated screen will be displayed.❒ When the function is on, a sports
driving setting is activated that
features more responsive
acceleration and increased force
required at the steering wheel to
produce a more sporty drive.
❒ Press the button again to
deactivate the function.
IMPORTANT When the function is
active, during acceleration the steering
may shudder, which is typical of a
sporty setting.
HAZARD WARNING
LIGHTS
Press the button fig. 48 to switch the
lights on/off. When the hazard warning
lights are on, the
andwarning
lights flash.
IMPORTANT The use of hazard
warning lights is governed by the
highway code of the country you are
driving in: comply with legal
requirements.

51
FUEL CUT-OFF
SYSTEM 8)
This intervenes in the case of an
impact causing:
❒ the fuel supply cut-off with the
engine consequently switching off
❒ automatically unlocking the doors
❒ switching on of all interior lights.
The intervention of the system is
indicated by a message shown on the
display.
IMPORTANT Carefully check the car
for fuel leaks, for instance in the engine
compartment, under the car or near
the tank area.
After a collision, turn the ignition key to
the STOP position to avoid draining the
battery.
To reset car operation, follow this
procedure:
❒ turn the ignition key to MAR
❒ activate the right direction indicator
❒ deactivate the right direction
indicator
❒ activate the left direction indicator
❒ deactivate the left direction indicator
❒ activate the right direction indicator
❒ deactivate the right direction
indicator
❒ activate the left direction indicator
❒ deactivate the left direction indicator
❒ ignition key turned to the OFF
position
❒ turn the ignition key to MAR.PARKING SENSORS
18) 25
(for versions/markets, where provided)
Located in the rear bumper fig. 51
these detect and inform the driver,
through an intermittent acoustic signal,
of the presence of obstacles at the rear
of the car.
As the distance from the obstacle
behind the car decreases, the acoustic
alarm becomes more frequent. The
buzzer becomes continuous when the
distance separating the vehicle from
the obstacle is less than about 30 cm.
It remains constant if the distance
between the vehicle and the obstacle
is unchanged.
If this situation concerns the side
sensors, the signal will stop after
approximately 3 seconds to avoid, for
example, indications in the event of
manoeuvres along a wall.
If several obstacles are detected by the
sensors, only the nearest one is
considered.

KNOWING YOUR CAR
54
REFUELLING THE
VEHICLE
21) 29)
PETROL AND DIESEL
VERSIONS
fig. 54
Opening tank cap
❒ open the flap A;
❒ turn the ignition key anticlockwise in
the lock and unscrew the cap B;
❒ during refuelling, the cap should be
positioned as illustrated.
54DVDF0S033c
Petrol engines
Use only unleaded gasoline with a
number of octanes not lower than
95 R.O.N. (EN228 specification).
Diesel engines
Use only diesel for motor vehicles
(EN590 specification).
LPG VERSIONS
LPG filler
The LPG filler is placed next to the
petrol filler plug.
It has a “non return”, located in the filler
body itself.
55DVDF0S034c
To access the filler, open the access
flap A-fig. 55 and undo the cap B.
Observe the following precautions
during the refuelling operation:
❒ stop the engine;
❒ apply the handbrake;
❒ turn the ignition key to STOP;
❒ do not smoke;
❒ hand the special adapter over to the
qualified LPG refuelling personnel.
IMPORTANT Before refuelling with
LPG, the qualified personnel should
make sure that the adaptor is correctly
tightened onto the filler fitting.
IMPORTANT Depending on the
country, there are different types of
adapters for refuelling pumps.
The adapter C-fig. 56 that comes with
the car in a special case is specifically
designed for the country in which the
car is sold.

55
If you are in a different country, find out
what type of adapter is used there.
IMPORTANT Only use LPG for motor
vehicles.
IMPORTANT Look after the LPG
adaptor carefully so that it does not get
damaged.
Fuel - Vehicle
compatibility
identification Graphic
symbol for consumer
information in
accordance with
EN16942
The symbols shown below facilitated
recognising the correct fuel type to be
used on your car.
56DVDF0S035c
Before proceeding with refuelling,
check the symbols inside the fuel filler
flap (where provided) and compare
them with the symbols shown on the
fuel pump (where provided).
Symbols for petrol powered cars
E5: Unleaded petrol containing up to
2.7% (m/m) oxygen and with
maximum 5.0% (V/V) ethanol
compliant with
EN228
E10: Unleaded petrol containing up to
3.7% (m/m) oxygen and with
maximum 10.0% (V/V) ethanol
compliant with
EN228
E5E10
Symbols for diesel powered cars
B7: Diesel containing up to 7% (V/V) of
FAME (Fatty Acid Methyl Esters)
compliant with EN590
B10: Diesel containing up to 10% (V/V)
of FAME (Fatty Acid Methyl Esters)
compliant with EN16734
Symbols for petrol - LPG bi-fuel
cars
E5: Unleaded petrol containing up to
2.7% (m/m) oxygen and with
maximum 5.0% (V/V) ethanol
compliant with EN228
E10:Unleaded petrol containing up to
3.7% (m/m) oxygen and with
maximum 10.0% (V/V) ethanol
compliant with EN228
LPG:Automotive LPG compliant with
EN589
B7B10
LPGE5E10

VERSION WITH LPG
SYSTEM
45) 29)
INTRODUCTION
The LPG version features two fuel
supply systems: one for petrol and one
for LPG.
Like the petrol system, the LPG system
is timed, sequential multipoint type with
special injectors.
PASSIVE SAFETY/ACTIVE
SAFETY
Passive safety
The car has the same passive safety
specifications as other versions. In
particular, the tank mountings (located
in the spare wheel housing) have been
designed to exceed the Fiat safety
standards for impact tests.
Active safety
The car has the same active safety
specifications as other versions.
Although the LPG system has
numerous safety features, it is
advisable to proceed as follows every
time the car is not in use for a long
period or moved in an emergency as a
result of a breakdown or accident:
❒ unscrew the fixing devices
A - fig. 57, then remove the cover B;
57DVDF0S036c
❒ close the LPG cock by rotating the
knurled ring nut C-fig. 58 clockwise;
❒ refit the cover and tighten the
fastening devices again.
58DVDF0S037c
KNOWING YOUR CAR
56

KNOWING YOUR CAR
58
❒ switch A pressed rightwards
(identified by symbol Kindicates
petrol operation with lighting of the
respective amber LED C;
❒ switch A pressed on the left side
(identified by the symbol G)
indicates LPG operation with
activation of the associated green
LED D.
Five LEDs B (one amber and four
green) on the top part of the switch
display the amount of LPG in the
cylinders.
If the LPG runs out, the system
automatically switches to petrol: the
amber LED C besides the switch
comes on and the green LED D
indicating LPG operation goes off.
60DVDF0S0189c
After refuelling with LPG, after a normal
start-up on petrol, the fuel system
automatically returns to LPG: the
amber LED C next to the switch goes
off and the green LED D for LPG
operation turns on.
If you specifically wish to run on petrol,
press the switch A on the right-hand
side.
The amber LED C next to the switch
will turn on to indicate that switching
has taken place (the LPG fuel system
has been entirely disabled).
The fuel supply can only be returned to
LPG by operating switch A again,
green LED D next to the switch will turn
on to indicate that switching has taken
place.
In addition, when starting at outside
temperatures below approximately –
10°C, the switching times from petrol
to LPG increase to allow the pressure
regulator/reduction unit to heat up.
IMPORTANT If switching takes place
during acceleration or setting off, there
may be a brief drop in power.MULTIMEDIA
47)
10)
TIPS, CONTROLS AND
GENERAL
INFORMATION
Road safety
Learn how to use the various system
functions before setting off.
Read the instructions for the system
carefully before setting off.
Reception conditions
Reception conditions change constantly
while driving.
Reception may be interfered with by the
presence of mountains, buildings or
bridges, especially when you are far
away from the broadcaster.
IMPORTANT The volume may be
increased when receiving traffic
bulletins.